configs: migrate CONFIG_VIDEO_BMP_RLE8 to defconfigs
[platform/kernel/u-boot.git] / include / configs / ls1088ardb.h
index b71f704..f59a9f5 100644 (file)
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2017 NXP
+ * Copyright 2017, 2020 NXP
  */
 
 #ifndef __LS1088A_RDB_H
@@ -8,37 +8,12 @@
 
 #include "ls1088a_common.h"
 
-#ifdef CONFIG_TFABOOT
-#define CONFIG_SYS_MMC_ENV_DEV         0
-
-#define CONFIG_ENV_SIZE                        0x2000          /* 8KB */
-#define CONFIG_ENV_OFFSET              0x500000
-#define CONFIG_ENV_ADDR                        (CONFIG_SYS_FLASH_BASE + \
-                                        CONFIG_ENV_OFFSET)
-#define CONFIG_ENV_SECT_SIZE           0x40000
-#else
-#if defined(CONFIG_QSPI_BOOT)
-#define CONFIG_ENV_SIZE                        0x2000          /* 8KB */
-#define CONFIG_ENV_SECT_SIZE           0x40000
-#elif defined(CONFIG_SD_BOOT)
-#define CONFIG_ENV_OFFSET              (3 * 1024 * 1024)
-#define CONFIG_SYS_MMC_ENV_DEV         0
-#define CONFIG_ENV_SIZE                        0x2000
-#else
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR                        (CONFIG_SYS_FLASH_BASE + 0x300000)
-#define CONFIG_ENV_SECT_SIZE           0x20000
-#define CONFIG_ENV_SIZE                        0x20000
-#endif
-#endif /* CONFIG_TFABOOT */
-
 #if defined(CONFIG_TFABOOT) || \
        defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_QIXIS_I2C_ACCESS
 #endif
 #define SYS_NO_FLASH
-#undef CONFIG_CMD_IMLS
 #endif
 
 #define CONFIG_SYS_CLK_FREQ            100000000
 #define CONFIG_SYS_NAND_BASE_LIST      { CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_MTD_NAND_VERIFY_WRITE
-#define CONFIG_CMD_NAND
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE     (128 * 1024)
 
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      3
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  5
 
-#ifndef SPL_NO_QSPI
-/* QSPI device */
-#if defined(CONFIG_TFABOOT) || \
-       defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
-#define FSL_QSPI_FLASH_SIZE            (1 << 26)
-#define FSL_QSPI_FLASH_NUM             2
-#endif
-#endif
-
-#define CONFIG_CMD_MEMINFO
-#define CONFIG_SYS_MEMTEST_START       0x80000000
-#define CONFIG_SYS_MEMTEST_END         0x9fffffff
-
 #ifdef CONFIG_SPL_BUILD
 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 #else
        "sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;"    \
        "sf read 0x80100000 0xE00000 0x100000;"                         \
        "env exists secureboot && "                     \
-       "sf read 0x80700000 0x700000 0x40000 && "       \
-       "sf read 0x80740000 0x740000 0x40000 && "       \
-       "esbc_validate 0x80700000 && "                  \
-       "esbc_validate 0x80740000 ;"                    \
+       "sf read 0x80640000 0x640000 0x40000 && "       \
+       "sf read 0x80680000 0x680000 0x40000 && "       \
+       "esbc_validate 0x80640000 && "                  \
+       "esbc_validate 0x80680000 ;"                    \
        "fsl_mc start mc 0x80000000 0x80100000\0"
 #define SD_MC_INIT_CMD                         \
        "mmcinfo;mmc read 0x80000000 0x5000 0x800;"             \
        "mmc read 0x80100000 0x7000 0x800;"                             \
        "env exists secureboot && "                     \
-       "mmc read 0x80700000 0x3800 0x10 && "           \
-       "mmc read 0x80740000 0x3A00 0x10 && "           \
-       "esbc_validate 0x80700000 && "                  \
-       "esbc_validate 0x80740000 ;"                    \
+       "mmc read 0x80640000 0x3200 0x20 && "           \
+       "mmc read 0x80680000 0x3400 0x20 && "           \
+       "esbc_validate 0x80640000 && "                  \
+       "esbc_validate 0x80680000 ;"                    \
        "fsl_mc start mc 0x80000000 0x80100000\0"
 #else
 #if defined(CONFIG_QSPI_BOOT)
        "mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;"  \
        "sf read 0x80100000 0xE00000 0x100000;"                         \
        "env exists secureboot && "                     \
-       "sf read 0x80700000 0x700000 0x40000 && "       \
-       "sf read 0x80740000 0x740000 0x40000 && "       \
-       "esbc_validate 0x80700000 && "                  \
-       "esbc_validate 0x80740000 ;"                    \
+       "sf read 0x80640000 0x640000 0x40000 && "       \
+       "sf read 0x80680000 0x680000 0x40000 && "       \
+       "esbc_validate 0x80640000 && "                  \
+       "esbc_validate 0x80680000 ;"                    \
        "fsl_mc start mc 0x80000000 0x80100000\0"       \
        "mcmemsize=0x70000000\0"
 #elif defined(CONFIG_SD_BOOT)
        "mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;"           \
        "mmc read 0x80100000 0x7000 0x800;"                             \
        "env exists secureboot && "                     \
-       "mmc read 0x80700000 0x3800 0x10 && "           \
-       "mmc read 0x80740000 0x3A00 0x10 && "           \
-       "esbc_validate 0x80700000 && "                  \
-       "esbc_validate 0x80740000 ;"                    \
+       "mmc read 0x80640000 0x3200 0x20 && "           \
+       "mmc read 0x80680000 0x3400 0x20 && "           \
+       "esbc_validate 0x80640000 && "                  \
+       "esbc_validate 0x80680000 ;"                    \
        "fsl_mc start mc 0x80000000 0x80100000\0"       \
        "mcmemsize=0x70000000\0"
 #endif
        "fdt_addr=0x64f00000\0"                 \
        "kernel_addr=0x1000000\0"               \
        "kernel_addr_sd=0x8000\0"               \
-       "kernelhdr_addr_sd=0x4000\0"            \
+       "kernelhdr_addr_sd=0x3000\0"            \
        "kernel_start=0x580100000\0"            \
-       "kernelheader_start=0x580800000\0"      \
+       "kernelheader_start=0x580600000\0"      \
        "scriptaddr=0x80000000\0"               \
        "scripthdraddr=0x80080000\0"            \
        "fdtheader_addr_r=0x80100000\0"         \
-       "kernelheader_addr=0x800000\0"          \
+       "kernelheader_addr=0x600000\0"          \
        "kernelheader_addr_r=0x80200000\0"      \
        "kernel_addr_r=0x81000000\0"            \
        "kernelheader_size=0x40000\0"           \
        "load_addr=0xa0000000\0"                \
        "kernel_size=0x2800000\0"               \
        "kernel_size_sd=0x14000\0"              \
-       "kernelhdr_size_sd=0x10\0"              \
+       "kernelhdr_size_sd=0x20\0"              \
        QSPI_MC_INIT_CMD                        \
        "mcmemsize=0x70000000\0"                \
        BOOTENV                                 \
        "fdt_addr=0x64f00000\0"                 \
        "kernel_addr=0x1000000\0"               \
        "kernel_addr_sd=0x8000\0"               \
-       "kernelhdr_addr_sd=0x4000\0"            \
+       "kernelhdr_addr_sd=0x3000\0"            \
        "kernel_start=0x580100000\0"            \
        "kernelheader_start=0x580800000\0"      \
        "scriptaddr=0x80000000\0"               \
        "scripthdraddr=0x80080000\0"            \
        "fdtheader_addr_r=0x80100000\0"         \
-       "kernelheader_addr=0x800000\0"          \
+       "kernelheader_addr=0x600000\0"          \
        "kernelheader_addr_r=0x80200000\0"      \
        "kernel_addr_r=0x81000000\0"            \
        "kernelheader_size=0x40000\0"           \
        "load_addr=0xa0000000\0"                \
        "kernel_size=0x2800000\0"               \
        "kernel_size_sd=0x14000\0"              \
-       "kernelhdr_size_sd=0x10\0"              \
+       "kernelhdr_size_sd=0x20\0"              \
        MC_INIT_CMD                             \
        BOOTENV                                 \
        "boot_scripts=ls1088ardb_boot.scr\0"    \
 #undef CONFIG_BOOTCOMMAND
 #ifdef CONFIG_TFABOOT
 #define QSPI_NOR_BOOTCOMMAND                                   \
-               "sf read 0x80001000 0xd00000 0x100000;"         \
+       "sf read 0x80001000 0xd00000 0x100000;"         \
                "env exists mcinitcmd && env exists secureboot "        \
-               " && sf read 0x80780000 0x780000 0x100000 "     \
-               "&& esbc_validate 0x80780000;env exists mcinitcmd "     \
+               " && sf read 0x806C0000 0x6C0000 0x100000 "     \
+               "&& esbc_validate 0x806C0000;env exists mcinitcmd "     \
                "&& fsl_mc lazyapply dpl 0x80001000;"           \
                "run distro_bootcmd;run qspi_bootcmd;"          \
                "env exists secureboot && esbc_halt;"
                "env exists mcinitcmd && mmcinfo; "             \
                "mmc read 0x80001000 0x6800 0x800; "            \
                "env exists mcinitcmd && env exists secureboot "        \
-               " && mmc read 0x80780000 0x3C00 0x10 "          \
-               "&& esbc_validate 0x80780000;env exists mcinitcmd "     \
+               " && mmc read 0x806C0000 0x3600 0x20 "          \
+               "&& esbc_validate 0x806C0000;env exists mcinitcmd "     \
                "&& fsl_mc lazyapply dpl 0x80001000;"           \
                "run distro_bootcmd;run sd_bootcmd;"            \
                "env exists secureboot && esbc_halt;"
 #define CONFIG_BOOTCOMMAND                                      \
                "sf read 0x80001000 0xd00000 0x100000;"         \
                "env exists mcinitcmd && env exists secureboot "        \
-               " && sf read 0x80780000 0x780000 0x100000 "     \
-               "&& esbc_validate 0x80780000;env exists mcinitcmd "     \
+               " && sf read 0x806C0000 0x6C0000 0x100000 "     \
+               "&& esbc_validate 0x806C0000;env exists mcinitcmd "     \
                "&& fsl_mc lazyapply dpl 0x80001000;"           \
                "run distro_bootcmd;run qspi_bootcmd;"          \
                "env exists secureboot && esbc_halt;"
                "env exists mcinitcmd && mmcinfo; "             \
                "mmc read 0x80001000 0x6800 0x800; "            \
                "env exists mcinitcmd && env exists secureboot "        \
-               " && mmc read 0x80780000 0x3C00 0x10 "          \
-               "&& esbc_validate 0x80780000;env exists mcinitcmd "     \
+               " && mmc read 0x806C0000 0x3600 0x20 "          \
+               "&& esbc_validate 0x806C0000;env exists mcinitcmd "     \
                "&& fsl_mc lazyapply dpl 0x80001000;"           \
                "run distro_bootcmd;run sd_bootcmd;"            \
                "env exists secureboot && esbc_halt;"
 
 /* MAC/PHY configuration */
 #ifdef CONFIG_FSL_MC_ENET
-#define CONFIG_PHYLIB
-
-#define CONFIG_PHY_VITESSE
 #define AQ_PHY_ADDR1                   0x00
 #define AQR105_IRQ_MASK                        0x00000004
 
 
 #define BOOT_TARGET_DEVICES(func) \
        func(MMC, mmc, 0) \
+       func(USB, usb, 0) \
        func(SCSI, scsi, 0) \
        func(DHCP, dhcp, na)
 #include <config_distro_bootcmd.h>