treewide: Migrate CONFIG_SYS_ALT_MEMTEST to Kconfig

[platform/kernel/u-boot.git] / include / configs / ls1088ardb.h

diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h
index 3c6c666..2315825 100644 (file)
--- a/include/configs/ls1088ardb.h
+++ b/include/configs/ls1088ardb.h
@@ -17,7 +17,6 @@
 
 #if defined(CONFIG_QSPI_BOOT)
 #define CONFIG_ENV_SIZE                        0x2000          /* 8KB */
-#define CONFIG_ENV_OFFSET              0x300000        /* 3MB */
 #define CONFIG_ENV_SECT_SIZE           0x40000
 #elif defined(CONFIG_SD_BOOT)
 #define CONFIG_ENV_OFFSET              (3 * 1024 * 1024)
@@ -152,6 +151,7 @@
 #endif
 
 #define CONFIG_SYS_I2C_FPGA_ADDR       0x66
+#define QIXIS_BRDCFG4_OFFSET            0x54
 #define QIXIS_LBMAP_SWITCH             2
 #define QIXIS_QMAP_MASK                        0xe0
 #define QIXIS_QMAP_SHIFT               5
@@ -160,9 +160,11 @@
 #define QIXIS_LBMAP_DFLTBANK           0x00
 #define QIXIS_LBMAP_ALTBANK            0x20
 #define QIXIS_LBMAP_SD                 0x00
+#define QIXIS_LBMAP_EMMC               0x00
 #define QIXIS_LBMAP_SD_QSPI            0x00
 #define QIXIS_LBMAP_QSPI               0x00
 #define QIXIS_RCW_SRC_SD               0x40
+#define QIXIS_RCW_SRC_EMMC             0x41
 #define QIXIS_RCW_SRC_QSPI             0x62
 #define QIXIS_RST_CTL_RESET            0x31
 #define QIXIS_RCFG_CTL_RECONFIG_IDLE   0x20
@@ -226,6 +228,32 @@
 
 #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
 
+#define I2C_MUX_CH_VOL_MONITOR          0xA
+/* Voltage monitor on channel 2*/
+#define I2C_VOL_MONITOR_ADDR           0x63
+#define I2C_VOL_MONITOR_BUS_V_OFFSET   0x2
+#define I2C_VOL_MONITOR_BUS_V_OVF      0x1
+#define I2C_VOL_MONITOR_BUS_V_SHIFT    3
+#define I2C_SVDD_MONITOR_ADDR          0x4F
+
+#define CONFIG_VID_FLS_ENV              "ls1088ardb_vdd_mv"
+#define CONFIG_VID
+
+/* The lowest and highest voltage allowed for LS1088ARDB */
+#define VDD_MV_MIN                     819
+#define VDD_MV_MAX                     1212
+
+#define CONFIG_VOL_MONITOR_LTC3882_SET
+#define CONFIG_VOL_MONITOR_LTC3882_READ
+
+/* PM Bus commands code for LTC3882*/
+#define PMBUS_CMD_PAGE                  0x0
+#define PMBUS_CMD_READ_VOUT             0x8B
+#define PMBUS_CMD_PAGE_PLUS_WRITE       0x05
+#define PMBUS_CMD_VOUT_COMMAND          0x21
+
+#define PWM_CHANNEL0                    0x0
+
 /*
  * I2C bus multiplexer
  */
@@ -264,7 +292,6 @@
 #endif
 
 #define CONFIG_CMD_MEMINFO
-#define CONFIG_CMD_MEMTEST
 #define CONFIG_SYS_MEMTEST_START       0x80000000
 #define CONFIG_SYS_MEMTEST_END         0x9fffffff
 
@@ -434,8 +461,6 @@
 #endif
 
 #ifndef SPL_NO_ENV
-#undef CONFIG_CMDLINE_EDITING
-#include <config_distro_defaults.h>
 
 #define BOOT_TARGET_DEVICES(func) \
        func(MMC, mmc, 0) \