treewide: Migrate CONFIG_SYS_ALT_MEMTEST to Kconfig

[platform/kernel/u-boot.git] / include / configs / ls1088ardb.h

diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h
index 1438bec..2315825 100644 (file)
--- a/include/configs/ls1088ardb.h
+++ b/include/configs/ls1088ardb.h
@@ -9,13 +9,14 @@
 
 #include "ls1088a_common.h"
 
+#ifndef SPL_NO_BOARDINFO
 #define CONFIG_DISPLAY_BOARDINFO_LATE
+#endif
 
 #define CONFIG_MISC_INIT_R
 
 #if defined(CONFIG_QSPI_BOOT)
 #define CONFIG_ENV_SIZE                        0x2000          /* 8KB */
-#define CONFIG_ENV_OFFSET              0x300000        /* 3MB */
 #define CONFIG_ENV_SECT_SIZE           0x40000
 #elif defined(CONFIG_SD_BOOT)
 #define CONFIG_ENV_OFFSET              (3 * 1024 * 1024)
@@ -29,7 +30,9 @@
 #endif
 
 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
+#ifndef CONFIG_SPL_BUILD
 #define CONFIG_QIXIS_I2C_ACCESS
+#endif
 #define SYS_NO_FLASH
 #undef CONFIG_CMD_IMLS
 #endif
@@ -97,7 +100,11 @@
 #define CONFIG_SYS_FLASH_BANKS_LIST    { CONFIG_SYS_FLASH_BASE }
 #endif
 #endif
+
+#ifndef SPL_NO_IFC
 #define CONFIG_NAND_FSL_IFC
+#endif
+
 #define CONFIG_SYS_NAND_MAX_ECCPOS     256
 #define CONFIG_SYS_NAND_MAX_OOBFREE    2
 
@@ -139,8 +146,12 @@
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE     (128 * 1024)
 
+#ifndef SPL_NO_QIXIS
 #define CONFIG_FSL_QIXIS
+#endif
+
 #define CONFIG_SYS_I2C_FPGA_ADDR       0x66
+#define QIXIS_BRDCFG4_OFFSET            0x54
 #define QIXIS_LBMAP_SWITCH             2
 #define QIXIS_QMAP_MASK                        0xe0
 #define QIXIS_QMAP_SHIFT               5
@@ -149,9 +160,11 @@
 #define QIXIS_LBMAP_DFLTBANK           0x00
 #define QIXIS_LBMAP_ALTBANK            0x20
 #define QIXIS_LBMAP_SD                 0x00
+#define QIXIS_LBMAP_EMMC               0x00
 #define QIXIS_LBMAP_SD_QSPI            0x00
 #define QIXIS_LBMAP_QSPI               0x00
 #define QIXIS_RCW_SRC_SD               0x40
+#define QIXIS_RCW_SRC_EMMC             0x41
 #define QIXIS_RCW_SRC_QSPI             0x62
 #define QIXIS_RST_CTL_RESET            0x31
 #define QIXIS_RCFG_CTL_RECONFIG_IDLE   0x20
@@ -215,6 +228,32 @@
 
 #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
 
+#define I2C_MUX_CH_VOL_MONITOR          0xA
+/* Voltage monitor on channel 2*/
+#define I2C_VOL_MONITOR_ADDR           0x63
+#define I2C_VOL_MONITOR_BUS_V_OFFSET   0x2
+#define I2C_VOL_MONITOR_BUS_V_OVF      0x1
+#define I2C_VOL_MONITOR_BUS_V_SHIFT    3
+#define I2C_SVDD_MONITOR_ADDR          0x4F
+
+#define CONFIG_VID_FLS_ENV              "ls1088ardb_vdd_mv"
+#define CONFIG_VID
+
+/* The lowest and highest voltage allowed for LS1088ARDB */
+#define VDD_MV_MIN                     819
+#define VDD_MV_MAX                     1212
+
+#define CONFIG_VOL_MONITOR_LTC3882_SET
+#define CONFIG_VOL_MONITOR_LTC3882_READ
+
+/* PM Bus commands code for LTC3882*/
+#define PMBUS_CMD_PAGE                  0x0
+#define PMBUS_CMD_READ_VOUT             0x8B
+#define PMBUS_CMD_PAGE_PLUS_WRITE       0x05
+#define PMBUS_CMD_VOUT_COMMAND          0x21
+
+#define PWM_CHANNEL0                    0x0
+
 /*
  * I2C bus multiplexer
  */
@@ -223,6 +262,8 @@
 #define I2C_RETIMER_ADDR               0x18
 #define I2C_MUX_CH_DEFAULT             0x8
 #define I2C_MUX_CH5                    0xD
+
+#ifndef SPL_NO_RTC
 /*
 * RTC configuration
 */
@@ -230,6 +271,7 @@
 #define CONFIG_RTC_PCF8563 1
 #define CONFIG_SYS_I2C_RTC_ADDR         0x51  /* Channel 3*/
 #define CONFIG_CMD_DATE
+#endif
 
 /* EEPROM */
 #define CONFIG_ID_EEPROM
@@ -240,15 +282,16 @@
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      3
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  5
 
+#ifndef SPL_NO_QSPI
 /* QSPI device */
 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 #define CONFIG_FSL_QSPI
 #define FSL_QSPI_FLASH_SIZE            (1 << 26)
 #define FSL_QSPI_FLASH_NUM             2
 #endif
+#endif
 
 #define CONFIG_CMD_MEMINFO
-#define CONFIG_CMD_MEMTEST
 #define CONFIG_SYS_MEMTEST_START       0x80000000
 #define CONFIG_SYS_MEMTEST_END         0x9fffffff
 
@@ -260,6 +303,7 @@
 
 #define CONFIG_FSL_MEMAC
 
+#ifndef SPL_NO_ENV
 /* Initial environment variables */
 #if defined(CONFIG_QSPI_BOOT)
 #define MC_INIT_CMD                            \
@@ -408,6 +452,7 @@
 #define CONFIG_ETHPRIME                "DPMAC1@xgmii"
 #define CONFIG_PHY_GIGE
 #endif
+#endif
 
 /*  MMC  */
 #ifdef CONFIG_MMC
@@ -415,14 +460,14 @@
 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 #endif
 
-#undef CONFIG_CMDLINE_EDITING
-#include <config_distro_defaults.h>
+#ifndef SPL_NO_ENV
 
 #define BOOT_TARGET_DEVICES(func) \
        func(MMC, mmc, 0) \
        func(SCSI, scsi, 0) \
        func(DHCP, dhcp, na)
 #include <config_distro_bootcmd.h>
+#endif
 
 #include <asm/fsl_secure_boot.h>