configs: net: dm9000: Move new Kconfig option to board configs

[platform/kernel/u-boot.git] / include / configs / ls1088ardb.h

diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h
index 6ad1fea..0a1a48b 100644 (file)
--- a/include/configs/ls1088ardb.h
+++ b/include/configs/ls1088ardb.h
@@ -16,7 +16,6 @@
 #define SYS_NO_FLASH
 #endif
 
-#define CONFIG_SYS_CLK_FREQ            100000000
 #define COUNTER_FREQUENCY_REAL         25000000        /* 25MHz */
 #define COUNTER_FREQUENCY              25000000        /* 25MHz */
 
@@ -61,7 +60,6 @@
 #define CONFIG_SYS_FLASH_QUIET_TEST
 #define CONFIG_FLASH_SHOW_PROGRESS     45 /* count down from 45/5: 9..1 */
 
-#define CONFIG_SYS_MAX_FLASH_BANKS     1       /* number of banks */
 #define CONFIG_SYS_MAX_FLASH_SECT      1024    /* sectors per device */
 #define CONFIG_SYS_FLASH_ERASE_TOUT    60000   /* Flash Erase Timeout (ms) */
 #define CONFIG_SYS_FLASH_WRITE_TOUT    500     /* Flash Write Timeout (ms) */
@@ -197,16 +195,10 @@
 #define I2C_VOL_MONITOR_BUS_V_SHIFT    3
 #define I2C_SVDD_MONITOR_ADDR          0x4F
 
-#define CONFIG_VID_FLS_ENV              "ls1088ardb_vdd_mv"
-#define CONFIG_VID
-
 /* The lowest and highest voltage allowed for LS1088ARDB */
 #define VDD_MV_MIN                     819
 #define VDD_MV_MAX                     1212
 
-#define CONFIG_VOL_MONITOR_LTC3882_SET
-#define CONFIG_VOL_MONITOR_LTC3882_READ
-
 #define PWM_CHANNEL0                    0x0
 
 /*
@@ -230,12 +222,6 @@
 #define CONFIG_SYS_I2C_EEPROM_NXID
 #define CONFIG_SYS_EEPROM_BUS_NUM              0
 
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
-#else
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#endif
-
 #define CONFIG_FSL_MEMAC
 
 #ifndef SPL_NO_ENV
@@ -424,7 +410,6 @@
                "bootm $load_addr#$BOARD\0"
 #endif /* CONFIG_TFABOOT */
 
-#undef CONFIG_BOOTCOMMAND
 #ifdef CONFIG_TFABOOT
 #define QSPI_NOR_BOOTCOMMAND                                   \
        "sf read 0x80001000 0xd00000 0x100000;"         \
@@ -446,26 +431,8 @@
 #else
 #if defined(CONFIG_QSPI_BOOT)
 /* Try to boot an on-QSPI kernel first, then do normal distro boot */
-#define CONFIG_BOOTCOMMAND                                      \
-               "sf read 0x80001000 0xd00000 0x100000;"         \
-               "env exists mcinitcmd && env exists secureboot "        \
-               " && sf read 0x806C0000 0x6C0000 0x100000 "     \
-               "&& esbc_validate 0x806C0000;env exists mcinitcmd "     \
-               "&& fsl_mc lazyapply dpl 0x80001000;"           \
-               "run distro_bootcmd;run qspi_bootcmd;"          \
-               "env exists secureboot && esbc_halt;"
 
 /* Try to boot an on-SD kernel first, then do normal distro boot */
-#elif defined(CONFIG_SD_BOOT)
-#define CONFIG_BOOTCOMMAND                                      \
-               "env exists mcinitcmd && mmcinfo; "             \
-               "mmc read 0x80001000 0x6800 0x800; "            \
-               "env exists mcinitcmd && env exists secureboot "        \
-               " && mmc read 0x806C0000 0x3600 0x20 "          \
-               "&& esbc_validate 0x806C0000;env exists mcinitcmd "     \
-               "&& fsl_mc lazyapply dpl 0x80001000;"           \
-               "run distro_bootcmd;run sd_bootcmd;"            \
-               "env exists secureboot && esbc_halt;"
 #endif
 #endif /* CONFIG_TFABOOT */
 
@@ -482,8 +449,6 @@
 #define QSGMII2_PORT2_PHY_ADDR         0x1d
 #define QSGMII2_PORT3_PHY_ADDR         0x1e
 #define QSGMII2_PORT4_PHY_ADDR         0x1f
-
-#define CONFIG_ETHPRIME                "DPMAC1@xgmii"
 #endif
 #endif