Convert CONFIG_PCI_GT64120 to Kconfig

[platform/kernel/u-boot.git] / include / configs / ls1088aqds.h

diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h
index 5912fe9..debb60d 100644 (file)
--- a/include/configs/ls1088aqds.h
+++ b/include/configs/ls1088aqds.h
@@ -9,20 +9,13 @@
 #include "ls1088a_common.h"
 
 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
-#define CONFIG_QIXIS_I2C_ACCESS
 #define SYS_NO_FLASH
-#else
-#define CONFIG_QIXIS_I2C_ACCESS
 #endif
 
 #define COUNTER_FREQUENCY_REAL         (get_board_sys_clk()/4)
-#define COUNTER_FREQUENCY              25000000        /* 25MHz */
-
-#define CONFIG_DIMM_SLOTS_PER_CTLR     1
 
 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 #define SPD_EEPROM_ADDRESS             0x51
-#define CONFIG_SYS_SPD_BUS_NUM         0
 
 
 /*
@@ -72,7 +65,6 @@
 #define CONFIG_SYS_FLASH_QUIET_TEST
 #define CONFIG_FLASH_SHOW_PROGRESS     45 /* count down from 45/5: 9..1 */
 
-#define CONFIG_SYS_MAX_FLASH_BANKS     2       /* number of banks */
 #define CONFIG_SYS_MAX_FLASH_SECT      1024    /* sectors per device */
 #define CONFIG_SYS_FLASH_ERASE_TOUT    60000   /* Flash Erase Timeout (ms) */
 #define CONFIG_SYS_FLASH_WRITE_TOUT    500     /* Flash Write Timeout (ms) */
@@ -119,7 +111,6 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_MTD_NAND_VERIFY_WRITE
 
-#define CONFIG_FSL_QIXIS
 #define CONFIG_SYS_I2C_FPGA_ADDR       0x66
 #define QIXIS_LBMAP_SWITCH             6
 #define QIXIS_QMAP_MASK                        0xe0
@@ -312,18 +303,8 @@
 #endif
 #endif
 
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
-#else
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#endif
-
 #define CONFIG_FSL_MEMAC
 
-/*  MMC  */
-#define CONFIG_ESDHC_DETECT_QUIRK ((readb(QIXIS_BASE + QIXIS_STAT_PRES1) & \
-       QIXIS_SDID_MASK) != QIXIS_ESDHC_NO_ADAPTER)
-
 #define COMMON_ENV \
        "kernelheader_addr_r=0x80200000\0"      \
        "fdtheader_addr_r=0x80100000\0"         \
@@ -517,8 +498,6 @@
 #define XQSGMII_CARD_PHY4_PORT2_ADDR 0xe
 #define XQSGMII_CARD_PHY4_PORT3_ADDR 0xf
 
-#define CONFIG_ETHPRIME                "DPMAC1@xgmii"
-
 #endif
 
 #define BOOT_TARGET_DEVICES(func) \