+/* SPDX-License-Identifier: GPL-2.0+ */
/*
- * Copyright 2017 NXP
- *
- * SPDX-License-Identifier: GPL-2.0+
+ * Copyright 2017-2018 NXP
*/
#ifndef __LS1088_COMMON_H
#define __LS1088_COMMON_H
+/* SPL build */
+#ifdef CONFIG_SPL_BUILD
+#define SPL_NO_BOARDINFO
+#define SPL_NO_QIXIS
+#define SPL_NO_PCI
+#define SPL_NO_ENV
+#define SPL_NO_RTC
+#define SPL_NO_USB
+#define SPL_NO_SATA
+#define SPL_NO_QSPI
+#define SPL_NO_IFC
+#undef CONFIG_DISPLAY_CPUINFO
+#endif
#define CONFIG_REMAKE_ELF
-#define CONFIG_FSL_LAYERSCAPE
-#define CONFIG_MP
#include <asm/arch/stream_id_lsch3.h>
#include <asm/arch/config.h>
#include <asm/arch/soc.h>
+#define LS1088ARDB_PB_BOARD 0x4A
/* Link Definitions */
+#ifdef CONFIG_TFABOOT
+#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
+#else
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
+#endif
/* Link Definitions */
-#ifdef CONFIG_QSPI_BOOT
-#define CONFIG_SYS_TEXT_BASE 0x20100000
+#ifdef CONFIG_TFABOOT
+#define CONFIG_SYS_FSL_QSPI_BASE 0x20000000
#else
-#define CONFIG_SYS_TEXT_BASE 0x30100000
+#ifdef CONFIG_QSPI_BOOT
+#define CONFIG_SYS_FSL_QSPI_BASE 0x20000000
+#define CONFIG_ENV_OFFSET 0x300000 /* 3MB */
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FSL_QSPI_BASE + \
+ CONFIG_ENV_OFFSET)
+#endif
#endif
-
-#define CONFIG_SUPPORT_RAW_INITRD
-
#define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_FSL_DDR_INTERACTIVE /* Interactive debugging */
-
#define CONFIG_VERY_BIG_RAM
#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL
#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0
/* I2C */
#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
-#define CONFIG_SYS_I2C_MXC_I2C4 /* enable I2C bus 4 */
/* Serial Port */
-#define CONFIG_CONS_INDEX 1
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE 1
#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0) / 2)
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+#if !defined(SPL_NO_IFC) || defined(CONFIG_TARGET_LS1088AQDS)
/* IFC */
#define CONFIG_FSL_IFC
+#endif
/*
* During booting, IFC is mapped at the region of 0x30000000.
#define CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET 0x00F20000
#define CONFIG_SYS_LS_MC_AIOP_IMG_MAX_LENGTH 0x200000
#define CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET 0x07000000
+
+/* Define phy_reset function to boot the MC based on mcinitcmd.
+ * This happens late enough to properly fixup u-boot env MAC addresses.
+ */
+#define CONFIG_RESET_PHY_R
+
/*
* Carve out a DDR region which will not be used by u-boot/Linux
*
*/
#if defined(CONFIG_FSL_MC_ENET)
-#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (512UL * 1024 * 1024)
+#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (128UL * 1024 * 1024)
#endif
-
-#define CONFIG_FSL_CAAM /* Enable SEC/CAAM */
-
/* Command line configuration */
-#define CONFIG_CMD_GREPENV
#define CONFIG_CMD_CACHE
/* Miscellaneous configurable options */
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
+/* SATA */
+#ifdef CONFIG_SCSI
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_SYS_SATA1 AHCI_BASE_ADDR1
+
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
+#define CONFIG_SYS_SCSI_MAX_LUN 1
+#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+ CONFIG_SYS_SCSI_MAX_LUN)
+#endif
+
/* Physical Memory Map */
#define CONFIG_CHIP_SELECTS_PER_CTRL 4
-#define CONFIG_NR_DRAM_BANKS 2
-
#define CONFIG_HWCONFIG
#define HWCONFIG_BUFFER_SIZE 128
/* #define CONFIG_DISPLAY_CPUINFO */
+#ifndef SPL_NO_ENV
/* Allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
"mcinitcmd=fsl_mc start mc 0x580a00000" \
" 0x580e00000 \0"
-#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0 " \
- "earlycon=uart8250,mmio,0x21c0500 " \
- "ramdisk_size=0x3000000 default_hugepagesz=2m" \
- " hugepagesz=2m hugepages=256"
+#ifndef CONFIG_TFABOOT
#if defined(CONFIG_QSPI_BOOT)
#define CONFIG_BOOTCOMMAND "sf probe 0:0;" \
- "sf read 0x80200000 0xd00000 0x100000;"\
- " fsl_mc apply dpl 0x80200000 &&" \
+ "sf read 0x80001000 0xd00000 0x100000;"\
+ " fsl_mc lazyapply dpl 0x80001000 &&" \
" sf read $kernel_load $kernel_start" \
" $kernel_size && bootm $kernel_load"
+#elif defined(CONFIG_SD_BOOT)
+#define CONFIG_BOOTCOMMAND "mmcinfo;mmc read 0x80001000 0x6800 0x800;"\
+ " fsl_mc lazyapply dpl 0x80001000 &&" \
+ " mmc read $kernel_load $kernel_start" \
+ " $kernel_size && bootm $kernel_load"
#else /* NOR BOOT*/
-#define CONFIG_BOOTCOMMAND "fsl_mc apply dpl 0x580d00000 &&" \
+#define CONFIG_BOOTCOMMAND "fsl_mc lazyapply dpl 0x580d00000 &&" \
" cp.b $kernel_start $kernel_load" \
" $kernel_size && bootm $kernel_load"
#endif
+#endif /* CONFIG_TFABOOT */
+#endif
/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING 1
-#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_MAXARGS 64 /* max command args */
-#define CONFIG_PANIC_HANG /* do not reset board on panic */
+#ifdef CONFIG_SPL
+#define CONFIG_SPL_BSS_START_ADDR 0x80100000
+#define CONFIG_SPL_BSS_MAX_SIZE 0x00100000
+#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"
+#define CONFIG_SPL_MAX_SIZE 0x16000
+#define CONFIG_SPL_STACK (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0)
+#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
+
+#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000
+#define CONFIG_SYS_SPL_MALLOC_START 0x80200000
+#ifdef CONFIG_SECURE_BOOT
+#define CONFIG_U_BOOT_HDR_SIZE (16 << 10)
+/*
+ * HDR would be appended at end of image and copied to DDR along
+ * with U-Boot image. Here u-boot max. size is 512K. So if binary
+ * size increases then increase this size in case of secure boot as
+ * it uses raw u-boot image instead of fit image.
+ */
+#define CONFIG_SYS_MONITOR_LEN (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
+#else
+#define CONFIG_SYS_MONITOR_LEN 0x100000
+#endif /* ifdef CONFIG_SECURE_BOOT */
+
+#endif
#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
#endif /* __LS1088_COMMON_H */
projects / platform / kernel / u-boot.git / blobdiff