MIPS: convert CONFIG_SYS_MIPS_TIMER_FREQ to Kconfig

[platform/kernel/u-boot.git] / include / configs / ls1088a_common.h

diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h
index 2e52108..7d76170 100644 (file)
--- a/include/configs/ls1088a_common.h
+++ b/include/configs/ls1088a_common.h
@@ -17,22 +17,14 @@
 #define SPL_NO_SATA
 #define SPL_NO_QSPI
 #define SPL_NO_IFC
-#undef CONFIG_DISPLAY_CPUINFO
 #endif
 
-#define CONFIG_REMAKE_ELF
-
 #include <asm/arch/stream_id_lsch3.h>
 #include <asm/arch/config.h>
 #include <asm/arch/soc.h>
 
 #define LS1088ARDB_PB_BOARD            0x4A
 /* Link Definitions */
-#ifdef CONFIG_TFABOOT
-#define CONFIG_SYS_INIT_SP_ADDR                CONFIG_SYS_TEXT_BASE
-#else
-#define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
-#endif
 
 /* Link Definitions */
 #define CONFIG_SYS_FSL_QSPI_BASE       0x20000000
@@ -42,7 +34,6 @@
 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY      0
 #define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
 #define CONFIG_SYS_DDR_BLOCK2_BASE     0x8080000000ULL
-#define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS      1
 /*
  * SMP Definitinos
  */
@@ -78,7 +69,7 @@
  * CONFIG_SYS_FLASH_BASE has the final address (core view)
  * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view)
  * CONFIG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address
- * CONFIG_SYS_TEXT_BASE is linked to 0x30000000 for booting
+ * CONFIG_TEXT_BASE is linked to 0x30000000 for booting
  */
 
 #define CONFIG_SYS_FLASH_BASE                  0x580000000ULL
@@ -110,11 +101,6 @@ unsigned long long get_qixis_addr(void);
 #define CONFIG_SYS_LS_MC_AIOP_IMG_MAX_LENGTH   0x200000
 #define CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET  0x07000000
 
-/* Define phy_reset function to boot the MC based on mcinitcmd.
- * This happens late enough to properly fixup u-boot env MAC addresses.
- */
-#define CONFIG_RESET_PHY_R
-
 /*
  * Carve out a DDR region which will not be used by u-boot/Linux
  *
@@ -128,25 +114,11 @@ unsigned long long get_qixis_addr(void);
 
 /* Miscellaneous configurable options */
 
-/* SATA */
-#ifdef CONFIG_SCSI
-#define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_SYS_SATA1               AHCI_BASE_ADDR1
-
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID    1
-#define CONFIG_SYS_SCSI_MAX_LUN                1
-#define CONFIG_SYS_SCSI_MAX_DEVICE     (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-                                       CONFIG_SYS_SCSI_MAX_LUN)
-#endif
-
 /* Physical Memory Map */
-#define CONFIG_CHIP_SELECTS_PER_CTRL   4
 
 #define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE           128
 
-/* #define CONFIG_DISPLAY_CPUINFO */
-
 #ifndef SPL_NO_ENV
 /* Initial environment variables */
 #define CONFIG_EXTRA_ENV_SETTINGS              \
@@ -165,23 +137,7 @@ unsigned long long get_qixis_addr(void);
        " 0x580e00000 \0"
 #endif
 
-/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE              512     /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
-                                       sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE /* Boot args buffer */
-#define CONFIG_SYS_MAXARGS             64      /* max command args */
-
 #ifdef CONFIG_SPL
-#define CONFIG_SPL_BSS_START_ADDR      0x80100000
-#define CONFIG_SPL_BSS_MAX_SIZE                0x00100000
-#define CONFIG_SPL_MAX_SIZE            0x16000
-#define CONFIG_SPL_STACK               (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0)
-#define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
-
-#define CONFIG_SYS_SPL_MALLOC_SIZE     0x00100000
-#define CONFIG_SYS_SPL_MALLOC_START    0x80200000
-
 #ifdef CONFIG_NXP_ESBC
 #define CONFIG_U_BOOT_HDR_SIZE         (16 << 10)
 /*
@@ -196,6 +152,5 @@ unsigned long long get_qixis_addr(void);
 #endif /* ifdef CONFIG_NXP_ESBC */
 
 #endif
-#define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 
 #endif /* __LS1088_COMMON_H */