Convert CONFIG_SYS_I2C_LEGACY to Kconfig and add CONFIG_[ST]PL_SYS_I2C_LEGACY

[platform/kernel/u-boot.git] / include / configs / ls1088a_common.h

diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h
index 822fd76..638fc49 100644 (file)
--- a/include/configs/ls1088a_common.h
+++ b/include/configs/ls1088a_common.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2017 NXP
+ * Copyright 2017-2018 NXP
  */
 
 #ifndef __LS1088_COMMON_H
@@ -21,30 +21,24 @@
 #endif
 
 #define CONFIG_REMAKE_ELF
-#define CONFIG_FSL_LAYERSCAPE
 
 #include <asm/arch/stream_id_lsch3.h>
 #include <asm/arch/config.h>
 #include <asm/arch/soc.h>
 
+#define LS1088ARDB_PB_BOARD            0x4A
 /* Link Definitions */
+#ifdef CONFIG_TFABOOT
+#define CONFIG_SYS_INIT_SP_ADDR                CONFIG_SYS_TEXT_BASE
+#else
 #define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
+#endif
 
 /* Link Definitions */
-
-#ifdef CONFIG_QSPI_BOOT
 #define CONFIG_SYS_FSL_QSPI_BASE       0x20000000
-#define CONFIG_ENV_OFFSET              0x300000        /* 3MB */
-#define CONFIG_ENV_ADDR                        (CONFIG_SYS_FSL_QSPI_BASE + \
-                                               CONFIG_ENV_OFFSET)
-#endif
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
 
-#if !defined(CONFIG_SD_BOOT)
-#define CONFIG_FSL_DDR_INTERACTIVE     /* Interactive debugging */
-#endif
-
 #define CONFIG_VERY_BIG_RAM
 #define CONFIG_SYS_DDR_SDRAM_BASE      0x80000000UL
 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY      0
@@ -54,24 +48,26 @@
 /*
  * SMP Definitinos
  */
-#define CPU_RELEASE_ADDR               secondary_boot_func
-
-#ifdef CONFIG_PCI
-#define CONFIG_CMD_PCI
-#endif
+#define CPU_RELEASE_ADDR               secondary_boot_addr
 
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 2048 * 1024)
 
+/* GPIO */
+#ifdef CONFIG_DM_GPIO
+#ifndef CONFIG_MPC8XXX_GPIO
+#define CONFIG_MPC8XXX_GPIO
+#endif
+#endif
+
 /* I2C */
-#define CONFIG_SYS_I2C
+
 
 /* Serial Port */
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE     1
 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0) / 2)
 
-#define CONFIG_BAUDRATE                        115200
 #define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 
 #if !defined(SPL_NO_IFC) || defined(CONFIG_TARGET_LS1088AQDS)
@@ -144,10 +140,8 @@ unsigned long long get_qixis_addr(void);
  */
 
 #if defined(CONFIG_FSL_MC_ENET)
-#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE           (512UL * 1024 * 1024)
+#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE           (128UL * 1024 * 1024)
 #endif
-/* Command line configuration */
-#define CONFIG_CMD_CACHE
 
 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LOAD_ADDR   (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
@@ -172,9 +166,6 @@ unsigned long long get_qixis_addr(void);
 /* #define CONFIG_DISPLAY_CPUINFO */
 
 #ifndef SPL_NO_ENV
-/* Allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
 /* Initial environment variables */
 #define CONFIG_EXTRA_ENV_SETTINGS              \
        "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
@@ -191,6 +182,7 @@ unsigned long long get_qixis_addr(void);
        "mcinitcmd=fsl_mc start mc 0x580a00000" \
        " 0x580e00000 \0"
 
+#ifndef CONFIG_TFABOOT
 #if defined(CONFIG_QSPI_BOOT)
 #define CONFIG_BOOTCOMMAND     "sf probe 0:0;" \
                                "sf read 0x80001000 0xd00000 0x100000;"\
@@ -207,6 +199,7 @@ unsigned long long get_qixis_addr(void);
                                " cp.b $kernel_start $kernel_load" \
                                " $kernel_size && bootm $kernel_load"
 #endif
+#endif /* CONFIG_TFABOOT  */
 #endif
 
 /* Monitor Command Prompt */
@@ -223,12 +216,11 @@ unsigned long long get_qixis_addr(void);
 #define CONFIG_SPL_MAX_SIZE            0x16000
 #define CONFIG_SPL_STACK               (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0)
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
-#define CONFIG_SPL_TEXT_BASE           0x1800a000
 
 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x00100000
 #define CONFIG_SYS_SPL_MALLOC_START    0x80200000
 
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
 #define CONFIG_U_BOOT_HDR_SIZE         (16 << 10)
 /*
  * HDR would be appended at end of image and copied to DDR along
@@ -239,7 +231,7 @@ unsigned long long get_qixis_addr(void);
 #define CONFIG_SYS_MONITOR_LEN         (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
 #else
 #define CONFIG_SYS_MONITOR_LEN         0x100000
-#endif /* ifdef CONFIG_SECURE_BOOT */
+#endif /* ifdef CONFIG_NXP_ESBC */
 
 #endif
 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */