#define LS1088ARDB_PB_BOARD 0x4A
/* Link Definitions */
-#ifdef CONFIG_TFABOOT
-#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
-#else
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
-#endif
/* Link Definitions */
-#define CONFIG_SYS_FSL_QSPI_BASE 0x20000000
+#define CFG_SYS_FSL_QSPI_BASE 0x20000000
#define CONFIG_VERY_BIG_RAM
-#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL
-#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0
-#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
-#define CONFIG_SYS_DDR_BLOCK2_BASE 0x8080000000ULL
-#define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS 1
+#define CFG_SYS_DDR_SDRAM_BASE 0x80000000UL
+#define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY 0
+#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE
+#define CFG_SYS_DDR_BLOCK2_BASE 0x8080000000ULL
/*
* SMP Definitinos
*/
/* Serial Port */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0) / 2)
+#define CFG_SYS_NS16550_CLK (get_bus_freq(0) / 2)
/*
* During booting, IFC is mapped at the region of 0x30000000.
* 0x5_C000_0000..0x5_ffff_ffff IFC CS1 1GB (NOR/Promjet)
*
* For e.g. NOR flash at CS0 will be mapped to 0x580000000 after relocation.
- * CONFIG_SYS_FLASH_BASE has the final address (core view)
- * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view)
- * CONFIG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address
- * CONFIG_SYS_TEXT_BASE is linked to 0x30000000 for booting
+ * CFG_SYS_FLASH_BASE has the final address (core view)
+ * CFG_SYS_FLASH_BASE_PHYS has the final address (IFC view)
+ * CFG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address
+ * CONFIG_TEXT_BASE is linked to 0x30000000 for booting
*/
-#define CONFIG_SYS_FLASH_BASE 0x580000000ULL
-#define CONFIG_SYS_FLASH_BASE_PHYS 0x80000000
-#define CONFIG_SYS_FLASH_BASE_PHYS_EARLY 0x00000000
+#define CFG_SYS_FLASH_BASE 0x580000000ULL
+#define CFG_SYS_FLASH_BASE_PHYS 0x80000000
+#define CFG_SYS_FLASH_BASE_PHYS_EARLY 0x00000000
-#define CONFIG_SYS_FLASH1_BASE_PHYS 0xC0000000
-#define CONFIG_SYS_FLASH1_BASE_PHYS_EARLY 0x8000000
+#define CFG_SYS_FLASH1_BASE_PHYS 0xC0000000
+#define CFG_SYS_FLASH1_BASE_PHYS_EARLY 0x8000000
#ifndef __ASSEMBLY__
unsigned long long get_qixis_addr(void);
#define QIXIS_BASE_PHYS_EARLY 0xC000000
-#define CONFIG_SYS_NAND_BASE 0x530000000ULL
-#define CONFIG_SYS_NAND_BASE_PHYS 0x30000000
+#define CFG_SYS_NAND_BASE 0x530000000ULL
+#define CFG_SYS_NAND_BASE_PHYS 0x30000000
/* MC firmware */
/* TODO Actual DPL max length needs to be confirmed with the MC FW team */
-#define CONFIG_SYS_LS_MC_DPC_MAX_LENGTH 0x20000
-#define CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET 0x00F00000
-#define CONFIG_SYS_LS_MC_DPL_MAX_LENGTH 0x20000
-#define CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET 0x00F20000
-#define CONFIG_SYS_LS_MC_AIOP_IMG_MAX_LENGTH 0x200000
-#define CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET 0x07000000
+#define CFG_SYS_LS_MC_DPC_MAX_LENGTH 0x20000
+#define CFG_SYS_LS_MC_DRAM_DPC_OFFSET 0x00F00000
+#define CFG_SYS_LS_MC_DPL_MAX_LENGTH 0x20000
+#define CFG_SYS_LS_MC_DRAM_DPL_OFFSET 0x00F20000
+#define CFG_SYS_LS_MC_AIOP_IMG_MAX_LENGTH 0x200000
+#define CFG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET 0x07000000
/*
* Carve out a DDR region which will not be used by u-boot/Linux
*/
#if defined(CONFIG_FSL_MC_ENET)
-#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (128UL * 1024 * 1024)
+#define CFG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (128UL * 1024 * 1024)
#endif
/* Miscellaneous configurable options */
-/* SATA */
-#ifdef CONFIG_SCSI
-#define CONFIG_SYS_SATA1 AHCI_BASE_ADDR1
-#endif
-
/* Physical Memory Map */
-#define CONFIG_HWCONFIG
#define HWCONFIG_BUFFER_SIZE 128
#ifndef SPL_NO_ENV
#endif
#ifdef CONFIG_SPL
-#define CONFIG_SPL_BSS_START_ADDR 0x80100000
-#define CONFIG_SPL_BSS_MAX_SIZE 0x00100000
-#define CONFIG_SPL_MAX_SIZE 0x16000
-#define CONFIG_SPL_STACK (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0)
-#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
-
-#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000
-#define CONFIG_SYS_SPL_MALLOC_START 0x80200000
-
#ifdef CONFIG_NXP_ESBC
#define CONFIG_U_BOOT_HDR_SIZE (16 << 10)
/*
* size increases then increase this size in case of secure boot as
* it uses raw u-boot image instead of fit image.
*/
-#define CONFIG_SYS_MONITOR_LEN (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
-#else
-#define CONFIG_SYS_MONITOR_LEN 0x100000
#endif /* ifdef CONFIG_NXP_ESBC */
#endif
-#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
#endif /* __LS1088_COMMON_H */