global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace

[platform/kernel/u-boot.git] / include / configs / ls1046afrwy.h

diff --git a/include/configs/ls1046afrwy.h b/include/configs/ls1046afrwy.h
index 7da0860..48408f2 100644 (file)
--- a/include/configs/ls1046afrwy.h
+++ b/include/configs/ls1046afrwy.h
@@ -8,21 +8,11 @@
 
 #include "ls1046a_common.h"
 
-#define CONFIG_SYS_CLK_FREQ            100000000
-
-#define CONFIG_LAYERSCAPE_NS_ACCESS
-
-#define CONFIG_DIMM_SLOTS_PER_CTLR     1
-#define CONFIG_CHIP_SELECTS_PER_CTRL   4
-
 #define CONFIG_SYS_UBOOT_BASE          0x40100000
 
-/* IFC */
-#define CONFIG_FSL_IFC
 /*
  * NAND Flash Definitions
  */
-#define CONFIG_NAND_FSL_IFC
 
 #define CONFIG_SYS_NAND_BASE           0x7e800000
 #define CONFIG_SYS_NAND_BASE_PHYS      CONFIG_SYS_NAND_BASE
@@ -41,8 +31,6 @@
                                | CSOR_NAND_SPRZ_128    /* Spare size = 128 */ \
                                | CSOR_NAND_PB(64))     /* 64 Pages Per Block */
 
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-
 #define CONFIG_SYS_NAND_FTIM0          (FTIM0_NAND_TCCST(0x7) | \
                                        FTIM0_NAND_TWP(0x18)   | \
                                        FTIM0_NAND_TWCHT(0x7) | \
@@ -57,11 +45,8 @@
 #define CONFIG_SYS_NAND_FTIM3          0x0
 
 #define CONFIG_SYS_NAND_BASE_LIST      { CONFIG_SYS_NAND_BASE }
-#define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_MTD_NAND_VERIFY_WRITE
 
-#define CONFIG_SYS_NAND_BLOCK_SIZE     (128 * 1024)
-
 /* IFC Timing Params */
 #define CONFIG_SYS_CSPR0_EXT           CONFIG_SYS_NAND_CSPR_EXT
 #define CONFIG_SYS_CSPR0               CONFIG_SYS_NAND_CSPR
@@ -73,8 +58,6 @@
 #define CONFIG_SYS_CS0_FTIM3           CONFIG_SYS_NAND_FTIM3
 
 /* EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_NXID
-#define CONFIG_SYS_EEPROM_BUS_NUM              0
 #define I2C_RETIMER_ADDR                       0x18
 
 /* I2C bus multiplexer */
@@ -90,15 +73,13 @@
 /*
  * Environment
  */
-#define CONFIG_SYS_FSL_QSPI_BASE       0x40000000
+#define CFG_SYS_FSL_QSPI_BASE  0x40000000
 
-#ifndef CONFIG_SPL_BUILD
 #undef BOOT_TARGET_DEVICES
 #define BOOT_TARGET_DEVICES(func) \
        func(MMC, mmc, 0) \
        func(USB, usb, 0) \
        func(DHCP, dhcp, na)
-#endif
 
 /* FMan */
 #ifdef CONFIG_SYS_DPAA_FMAN
@@ -110,11 +91,8 @@
 
 #define FDT_SEQ_MACADDR_FROM_ENV
 
-#define CONFIG_ETHPRIME                        "FM1@DTSEC3"
-
 #endif
 
-#undef CONFIG_BOOTCOMMAND
 #define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "  \
                           "env exists secureboot && esbc_halt;;"
 #define SD_BOOTCOMMAND "run distro_bootcmd;run sd_bootcmd; "   \