treewide: Migrate CONFIG_FSL_ESDHC to Kconfig

[platform/kernel/u-boot.git] / include / configs / ls1046a_common.h

diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h
index 11f2a28..7d67f10 100644 (file)
--- a/include/configs/ls1046a_common.h
+++ b/include/configs/ls1046a_common.h
@@ -35,8 +35,6 @@
 /* Link Definitions */
 #define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
 
-#define CONFIG_SUPPORT_RAW_INITRD
-
 #define CONFIG_SKIP_LOWLEVEL_INIT
 
 #define CONFIG_VERY_BIG_RAM
@@ -54,7 +52,6 @@
 #define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 1024 * 1024)
 
 /* Serial Port */
-#define CONFIG_CONS_INDEX              1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK          (get_serial_clock())
@@ -63,7 +60,6 @@
 
 /* SD boot SPL */
 #ifdef CONFIG_SD_BOOT
-#define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
@@ -102,7 +98,6 @@
 /* NAND SPL */
 #ifdef CONFIG_NAND_BOOT
 #define CONFIG_SPL_PBL_PAD
-#define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
@@ -145,20 +140,27 @@
 #define CONFIG_PCI_SCAN_SHOW
 #endif
 
+/* SATA */
+#ifndef SPL_NO_SATA
+#define CONFIG_SCSI_AHCI_PLAT
+
+#define CONFIG_SYS_SATA                                AHCI_BASE_ADDR
+
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID            1
+#define CONFIG_SYS_SCSI_MAX_LUN                        1
+#define CONFIG_SYS_SCSI_MAX_DEVICE             (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+                                               CONFIG_SYS_SCSI_MAX_LUN)
+#endif
+
 /* Command line configuration */
 
 /* MMC */
 #ifndef SPL_NO_MMC
 #ifdef CONFIG_MMC
-#define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 #endif
 #endif
 
-#ifndef SPL_NO_QBMAN
-#define CONFIG_SYS_DPAA_QBMAN          /* Support Q/Bman */
-#endif
-
 /* FMan ucode */
 #ifndef SPL_NO_FMAN
 #define CONFIG_SYS_DPAA_FMAN
@@ -198,9 +200,9 @@
 #define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE           128
 
-#include <config_distro_defaults.h>
 #ifndef CONFIG_SPL_BUILD
 #define BOOT_TARGET_DEVICES(func) \
+       func(SCSI, scsi, 0) \
        func(MMC, mmc, 0) \
        func(USB, usb, 0)
 #include <config_distro_bootcmd.h>
@@ -225,10 +227,14 @@
        "fdt_addr_r=0x90000000\0"               \
        "ramdisk_addr_r=0xa0000000\0"           \
        "kernel_start=0x1000000\0"              \
+       "kernelheader_start=0x800000\0"         \
        "kernel_load=0xa0000000\0"              \
        "kernel_size=0x2800000\0"               \
+       "kernelheader_size=0x40000\0"           \
        "kernel_addr_sd=0x8000\0"               \
        "kernel_size_sd=0x14000\0"              \
+       "kernelhdr_addr_sd=0x4000\0"            \
+       "kernelhdr_size_sd=0x10\0"              \
        "console=ttyS0,115200\0"                \
         CONFIG_MTDPARTS_DEFAULT "\0"           \
        BOOTENV                                 \
@@ -261,19 +267,23 @@
                "source ${scriptaddr}\0"          \
        "qspi_bootcmd=echo Trying load from qspi..;"      \
                "sf probe && sf read $load_addr "         \
-               "$kernel_start $kernel_size && bootm $load_addr#$board\0" \
+               "$kernel_start $kernel_size; env exists secureboot "    \
+               "&& sf read $kernelheader_addr_r $kernelheader_start "  \
+               "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
+               "bootm $load_addr#$board\0"             \
        "sd_bootcmd=echo Trying load from SD ..;"       \
                "mmcinfo; mmc read $load_addr "         \
                "$kernel_addr_sd $kernel_size_sd && "   \
+               "env exists secureboot && mmc read $kernelheader_addr_r "               \
+               "$kernelhdr_addr_sd $kernelhdr_size_sd "                \
+               " && esbc_validate ${kernelheader_addr_r};"     \
                "bootm $load_addr#$board\0"
 
 #endif
 
 /* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE              512     /* Console I/O Buffer Size */
-#define CONFIG_SYS_LONGHELP
 
-#define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_MAXARGS             64      /* max command args */
 
 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */