Convert CONFIG_UBI_SILENCE_MSG to Kconfig

[platform/kernel/u-boot.git] / include / configs / ls1043aqds.h

diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h
index 98da408..43be0cd 100644 (file)
--- a/include/configs/ls1043aqds.h
+++ b/include/configs/ls1043aqds.h
@@ -9,14 +9,6 @@
 
 #include "ls1043a_common.h"
 
-#if defined(CONFIG_NAND_BOOT) || defined(CONFIG_SD_BOOT)
-#define CONFIG_SYS_TEXT_BASE           0x82000000
-#elif defined(CONFIG_QSPI_BOOT)
-#define CONFIG_SYS_TEXT_BASE           0x40010000
-#else
-#define CONFIG_SYS_TEXT_BASE           0x60100000
-#endif
-
 #ifndef __ASSEMBLY__
 unsigned long get_board_sys_clk(void);
 unsigned long get_board_ddr_clk(void);
@@ -38,7 +30,9 @@ unsigned long get_board_ddr_clk(void);
 #define SPD_EEPROM_ADDRESS             0x51
 #define CONFIG_SYS_SPD_BUS_NUM         0
 
+#ifndef CONFIG_SPL
 #define CONFIG_FSL_DDR_INTERACTIVE     /* Interactive debugging */
+#endif
 
 #define CONFIG_DDR_ECC
 #ifdef CONFIG_DDR_ECC
@@ -48,7 +42,6 @@ unsigned long get_board_ddr_clk(void);
 
 #ifdef CONFIG_SYS_DPAA_FMAN
 #define CONFIG_FMAN_ENET
-#define CONFIG_PHYLIB
 #define CONFIG_PHY_VITESSE
 #define CONFIG_PHY_REALTEK
 #define CONFIG_PHYLIB_10G
@@ -93,10 +86,7 @@ unsigned long get_board_ddr_clk(void);
 #endif
 
 /* SATA */
-#define CONFIG_LIBATA
-#define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_SCSI
 
 /* EEPROM */
 #define CONFIG_ID_EEPROM
@@ -198,7 +188,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_NAND_BASE_LIST      { CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_MTD_NAND_VERIFY_WRITE
-#define CONFIG_CMD_NAND
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE     (128 * 1024)
 #endif
@@ -212,7 +201,6 @@ unsigned long get_board_ddr_clk(void);
 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 #define CONFIG_QIXIS_I2C_ACCESS
 #define CONFIG_SYS_I2C_EARLY_INIT
-#define CONFIG_SYS_NO_FLASH
 #endif
 
 /*
@@ -372,35 +360,16 @@ unsigned long get_board_ddr_clk(void);
 #endif
 #endif
 
-/* USB */
-#define CONFIG_HAS_FSL_XHCI_USB
-#ifdef CONFIG_HAS_FSL_XHCI_USB
-#define CONFIG_USB_XHCI_FSL
-#define CONFIG_USB_MAX_CONTROLLER_COUNT                3
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS     2
-#endif
-
 /*
  * Miscellaneous configurable options
  */
 #define CONFIG_MISC_INIT_R
-#define CONFIG_SYS_LONGHELP            /* undef to save memory */
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_PBSIZE              \
-               (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
 
 #define CONFIG_SYS_MEMTEST_START       0x80000000
 #define CONFIG_SYS_MEMTEST_END         0x9fffffff
 
 #define CONFIG_SYS_HZ                  1000
 
-/*
- * Stack sizes
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE               (30 * 1024)
-
 #define CONFIG_SYS_INIT_SP_OFFSET \
        (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 
@@ -416,22 +385,18 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_ENV_OVERWRITE
 
 #ifdef CONFIG_NAND_BOOT
-#define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_SIZE                        0x2000
-#define CONFIG_ENV_OFFSET              (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
+#define CONFIG_ENV_OFFSET              (24 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #elif defined(CONFIG_SD_BOOT)
-#define CONFIG_ENV_OFFSET              (1024 * 1024)
-#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_OFFSET              (3 * 1024 * 1024)
 #define CONFIG_SYS_MMC_ENV_DEV         0
 #define CONFIG_ENV_SIZE                        0x2000
 #elif defined(CONFIG_QSPI_BOOT)
-#define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_SIZE                        0x2000          /* 8KB */
-#define CONFIG_ENV_OFFSET              0x100000        /* 1MB */
+#define CONFIG_ENV_OFFSET              0x300000        /* 3MB */
 #define CONFIG_ENV_SECT_SIZE           0x10000
 #else
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR                        (CONFIG_SYS_FLASH_BASE + 0x200000)
+#define CONFIG_ENV_ADDR                        (CONFIG_SYS_FLASH_BASE + 0x300000)
 #define CONFIG_ENV_SECT_SIZE           0x20000
 #define CONFIG_ENV_SIZE                        0x20000
 #endif