#include <asm/arch/config.h>
/* Link Definitions */
-#ifdef CONFIG_TFABOOT
-#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
-#else
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
-#endif
#define CONFIG_VERY_BIG_RAM
-#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000
-#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0
-#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
-#define CONFIG_SYS_DDR_BLOCK2_BASE 0x880000000ULL
+#define CFG_SYS_DDR_SDRAM_BASE 0x80000000
+#define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY 0
+#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE
+#define CFG_SYS_DDR_BLOCK2_BASE 0x880000000ULL
#define CPU_RELEASE_ADDR secondary_boot_addr
-/* Generic Timer Definitions */
-#define COUNTER_FREQUENCY 25000000 /* 25MHz */
-
/* Serial Port */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-#define CONFIG_SYS_NS16550_CLK (get_serial_clock())
+#define CFG_SYS_NS16550_CLK (get_serial_clock())
/* SD boot SPL */
#ifdef CONFIG_SD_BOOT
-
-#define CONFIG_SPL_MAX_SIZE 0x17000
-#define CONFIG_SPL_STACK 0x1001e000
-#define CONFIG_SPL_PAD_TO 0x1d000
-
-#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \
- CONFIG_SPL_BSS_MAX_SIZE)
-#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
-#define CONFIG_SPL_BSS_START_ADDR 0x8f000000
-#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
-
#ifdef CONFIG_NXP_ESBC
#define CONFIG_U_BOOT_HDR_SIZE (16 << 10)
/*
* size increases then increase this size in case of secure boot as
* it uses raw u-boot image instead of fit image.
*/
-#define CONFIG_SYS_MONITOR_LEN (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
-#else
-#define CONFIG_SYS_MONITOR_LEN 0x100000
#endif /* ifdef CONFIG_NXP_ESBC */
#endif
/* NAND SPL */
#ifdef CONFIG_NAND_BOOT
-#define CONFIG_SPL_PBL_PAD
-#define CONFIG_SPL_MAX_SIZE 0x1a000
-#define CONFIG_SPL_STACK 0x1001d000
-#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_SPL_MALLOC_START 0x80200000
-#define CONFIG_SPL_BSS_START_ADDR 0x80100000
-#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
-#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
+#define CFG_SYS_NAND_U_BOOT_DST CONFIG_TEXT_BASE
+#define CFG_SYS_NAND_U_BOOT_START CONFIG_TEXT_BASE
#ifdef CONFIG_NXP_ESBC
#define CONFIG_U_BOOT_HDR_SIZE (16 << 10)
* size increases then increase this size in case of secure boot as
* it uses raw u-boot image instead of fit image.
*/
-#define CONFIG_SYS_MONITOR_LEN (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
-#else
-#define CONFIG_SYS_MONITOR_LEN 0x100000
#endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */
#endif
#if defined(CONFIG_TFABOOT) || \
(!defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI))
/*
- * CONFIG_SYS_FLASH_BASE has the final address (core view)
- * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view)
- * CONFIG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address
- * CONFIG_SYS_TEXT_BASE is linked to 0x60000000 for booting
+ * CFG_SYS_FLASH_BASE has the final address (core view)
+ * CFG_SYS_FLASH_BASE_PHYS has the final address (IFC view)
+ * CFG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address
+ * CONFIG_TEXT_BASE is linked to 0x60000000 for booting
*/
-#define CONFIG_SYS_FLASH_BASE 0x60000000
-#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_FLASH_BASE_PHYS_EARLY 0x00000000
-
-#ifdef CONFIG_MTD_NOR_FLASH
-#define CONFIG_SYS_FLASH_QUIET_TEST
-#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
-#endif
+#define CFG_SYS_FLASH_BASE 0x60000000
+#define CFG_SYS_FLASH_BASE_PHYS CFG_SYS_FLASH_BASE
+#define CFG_SYS_FLASH_BASE_PHYS_EARLY 0x00000000
#endif
#endif
/* I2C */
-/* PCIe */
-#ifndef SPL_NO_PCIE
-#define CONFIG_PCIE1 /* PCIE controller 1 */
-#define CONFIG_PCIE2 /* PCIE controller 2 */
-#define CONFIG_PCIE3 /* PCIE controller 3 */
-
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_SCAN_SHOW
-#endif
-#endif
-
/* DSPI */
/* FMan ucode */
#ifndef SPL_NO_FMAN
-#define CONFIG_SYS_DPAA_FMAN
#ifdef CONFIG_SYS_DPAA_FMAN
-#define CONFIG_SYS_FM_MURAM_SIZE 0x60000
-
-#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
+#define CFG_SYS_FM_MURAM_SIZE 0x60000
#endif
#endif
/* Miscellaneous configurable options */
-#define CONFIG_HWCONFIG
#define HWCONFIG_BUFFER_SIZE 128
#ifndef SPL_NO_MISC
-#ifndef CONFIG_SPL_BUILD
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0) \
func(USB, usb, 0) \
func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
-#endif
/* Initial environment variables */
#define CONFIG_EXTRA_ENV_SETTINGS \
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
"fdt_high=0xffffffffffffffff\0" \
"initrd_high=0xffffffffffffffff\0" \
- "fdt_addr=0x64f00000\0" \
"kernel_addr=0x61000000\0" \
"scriptaddr=0x80000000\0" \
"scripthdraddr=0x80080000\0" \
"kernelhdr_size_sd=0x10\0" \
"console=ttyS0,115200\0" \
"boot_os=y\0" \
- "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
BOOTENV \
"boot_scripts=ls1043ardb_boot.scr\0" \
"boot_script_hdr=hdr_ls1043ardb_bs.out\0" \
#endif
#endif
-/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
-
-#define CONFIG_SYS_MAXARGS 64 /* max command args */
-
-#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
-
#include <asm/arch/soc.h>
#endif /* __LS1043A_COMMON_H */
projects / platform / kernel / u-boot.git / blobdiff