Convert CONFIG_CMD_EEPROM et al to Kconfig

[platform/kernel/u-boot.git] / include / configs / ls1043a_common.h

diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index 46d54a0..0522d1e 100644 (file)
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -7,9 +7,27 @@
 #ifndef __LS1043A_COMMON_H
 #define __LS1043A_COMMON_H
 
+/* SPL build */
+#ifdef CONFIG_SPL_BUILD
+#define SPL_NO_FMAN
+#define SPL_NO_DSPI
+#define SPL_NO_PCIE
+#define SPL_NO_ENV
+#define SPL_NO_MISC
+#define SPL_NO_USB
+#define SPL_NO_SATA
+#define SPL_NO_QE
+#define SPL_NO_EEPROM
+#endif
+#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_NAND_BOOT))
+#define SPL_NO_MMC
+#endif
+#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SD_BOOT))
+#define SPL_NO_IFC
+#endif
+
 #define CONFIG_REMAKE_ELF
 #define CONFIG_FSL_LAYERSCAPE
-#define CONFIG_LS1043A
 #define CONFIG_MP
 #define CONFIG_GICV2
 
@@ -52,7 +70,7 @@
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
 
 #define CONFIG_SPL_TEXT_BASE           0x10000000
-#define CONFIG_SPL_MAX_SIZE            0x1d000
+#define CONFIG_SPL_MAX_SIZE            0x17000
 #define CONFIG_SPL_STACK               0x1001e000
 #define CONFIG_SPL_PAD_TO              0x1d000
 
@@ -61,7 +79,19 @@
 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x100000
 #define CONFIG_SPL_BSS_START_ADDR      0x80100000
 #define CONFIG_SPL_BSS_MAX_SIZE                0x80000
-#define CONFIG_SYS_MONITOR_LEN         0xa0000
+
+#ifdef CONFIG_SECURE_BOOT
+#define CONFIG_U_BOOT_HDR_SIZE                         (16 << 10)
+/*
+ * HDR would be appended at end of image and copied to DDR along
+ * with U-Boot image. Here u-boot max. size is 512K. So if binary
+ * size increases then increase this size in case of secure boot as
+ * it uses raw u-boot image instead of fit image.
+ */
+#define CONFIG_SYS_MONITOR_LEN         (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
+#else
+#define CONFIG_SYS_MONITOR_LEN         0x100000
+#endif /* ifdef CONFIG_SECURE_BOOT */
 #endif
 
 /* NAND SPL */
@@ -79,10 +109,27 @@
 #define CONFIG_SPL_BSS_START_ADDR      0x80100000
 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x100000
 #define CONFIG_SPL_BSS_MAX_SIZE                0x80000
-#define CONFIG_SYS_MONITOR_LEN         0xa0000
+
+#ifdef CONFIG_SECURE_BOOT
+#define CONFIG_U_BOOT_HDR_SIZE                         (16 << 10)
+#endif /* ifdef CONFIG_SECURE_BOOT */
+
+#ifdef CONFIG_U_BOOT_HDR_SIZE
+/*
+ * HDR would be appended at end of image and copied to DDR along
+ * with U-Boot image. Here u-boot max. size is 512K. So if binary
+ * size increases then increase this size in case of secure boot as
+ * it uses raw u-boot image instead of fit image.
+ */
+#define CONFIG_SYS_MONITOR_LEN         (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
+#else
+#define CONFIG_SYS_MONITOR_LEN         0x100000
+#endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */
+
 #endif
 
 /* IFC */
+#ifndef SPL_NO_IFC
 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
 #define CONFIG_FSL_IFC
 /*
@@ -103,6 +150,7 @@
 #define CONFIG_FLASH_SHOW_PROGRESS     45      /* count down from 45/5: 9..1 */
 #endif
 #endif
+#endif
 
 /* I2C */
 #define CONFIG_SYS_I2C
@@ -113,6 +161,7 @@
 #define CONFIG_SYS_I2C_MXC_I2C4
 
 /* PCIe */
+#ifndef SPL_NO_PCIE
 #define CONFIG_PCIE1           /* PCIE controller 1 */
 #define CONFIG_PCIE2           /* PCIE controller 2 */
 #define CONFIG_PCIE3           /* PCIE controller 3 */
@@ -122,17 +171,23 @@
 #define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_CMD_PCI
 #endif
+#endif
 
 /* Command line configuration */
+#ifndef SPL_NO_ENV
 #define CONFIG_CMD_ENV
+#endif
 
 /*  MMC  */
+#ifndef SPL_NO_MMC
 #ifdef CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 #endif
+#endif
 
 /*  DSPI  */
+#ifndef SPL_NO_DSPI
 #define CONFIG_FSL_DSPI
 #ifdef CONFIG_FSL_DSPI
 #define CONFIG_DM_SPI_FLASH
@@ -144,8 +199,10 @@
 #define CONFIG_SF_DEFAULT_CS           0
 #endif
 #endif
+#endif
 
 /* FMan ucode */
+#ifndef SPL_NO_FMAN
 #define CONFIG_SYS_DPAA_FMAN
 #ifdef CONFIG_SYS_DPAA_FMAN
 #define CONFIG_SYS_FM_MURAM_SIZE       0x60000
@@ -177,6 +234,7 @@
 #define CONFIG_SYS_QE_FMAN_FW_LENGTH   0x10000
 #define CONFIG_SYS_FDT_PAD             (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 #endif
+#endif
 
 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LOAD_ADDR   (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
@@ -184,6 +242,7 @@
 #define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE           128
 
+#ifndef SPL_NO_MISC
 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 #define MTDPARTS_DEFAULT "mtdparts=spi0.0:1m(uboot)," \
                        "5m(kernel),1m(dtb),9m(file_system)"
@@ -224,6 +283,7 @@
 #define CONFIG_BOOTCOMMAND             "cp.b $kernel_start $kernel_load "     \
                                        "$kernel_size && bootm $kernel_load"
 #endif
+#endif
 
 /* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE              512     /* Console I/O Buffer Size */
@@ -231,7 +291,11 @@
                                        sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE /* Boot args buffer */
 #define CONFIG_SYS_LONGHELP
+
+#ifndef SPL_NO_MISC
 #define CONFIG_CMDLINE_EDITING         1
+#endif
+
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_MAXARGS             64      /* max command args */
 
@@ -240,7 +304,6 @@
 /* Hash command with SHA acceleration supported in hardware */
 #ifdef CONFIG_FSL_CAAM
 #define CONFIG_CMD_HASH
-#define CONFIG_SHA_HW_ACCEL
 #endif
 
 #endif /* __LS1043A_COMMON_H */