Convert CONFIG_IMX_VIDEO_SKIP et al to Kconfig

[platform/kernel/u-boot.git] / include / configs / ls1028ardb.h

diff --git a/include/configs/ls1028ardb.h b/include/configs/ls1028ardb.h
index 15ac1f5..5c13461 100644 (file)
--- a/include/configs/ls1028ardb.h
+++ b/include/configs/ls1028ardb.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2019 NXP
+ * Copyright 2019, 2021 NXP
  */
 
 #ifndef __LS1028A_RDB_H
@@ -10,7 +10,7 @@
 
 #define COUNTER_FREQUENCY_REAL         (get_board_sys_clk() / 4)
 
-#define CONFIG_SYS_RTC_BUS_NUM         0
+#define CFG_SYS_RTC_BUS_NUM         0
 
 /* Store environment at top of flash */
 
@@ -21,7 +21,7 @@
 #ifdef CONFIG_FSL_QIXIS
 #define QIXIS_BASE                     0x7fb00000
 #define QIXIS_BASE_PHYS                        QIXIS_BASE
-#define CONFIG_SYS_I2C_FPGA_ADDR       0x66
+#define CFG_SYS_I2C_FPGA_ADDR  0x66
 #define QIXIS_LBMAP_SWITCH             2
 #define QIXIS_LBMAP_MASK               0xe0
 #define QIXIS_LBMAP_SHIFT              0x5
@@ -39,12 +39,12 @@
 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE  0x08
 #define QIXIS_RST_FORCE_MEM            0x01
 
-#define CONFIG_SYS_FPGA_CSPR_EXT       (0x0)
-#define CONFIG_SYS_FPGA_CSPR           (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) | \
+#define CFG_SYS_FPGA_CSPR_EXT  (0x0)
+#define CFG_SYS_FPGA_CSPR              (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) | \
                                        CSPR_PORT_SIZE_8 | \
                                        CSPR_MSEL_GPCM | \
                                        CSPR_V)
-#define CONFIG_SYS_FPGA_CSOR           (CSOR_NOR_ADM_SHIFT(4) | \
+#define CFG_SYS_FPGA_CSOR              (CSOR_NOR_ADM_SHIFT(4) | \
                                        CSOR_NOR_NOR_MODE_AVD_NOR | \
                                        CSOR_NOR_TRHZ_80)
 #endif
@@ -53,7 +53,6 @@
 #define SCSI_VEND_ID 0x1b4b
 #define SCSI_DEV_ID  0x9170
 #define CONFIG_SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID}
-#define CONFIG_SYS_SATA1                        AHCI_BASE_ADDR1
 
 /* Initial environment variables */
 #ifndef SPL_NO_ENV
@@ -64,7 +63,6 @@
        "ramdisk_addr=0x800000\0"               \
        "ramdisk_size=0x2000000\0"              \
        "bootm_size=0x10000000\0"               \
-       "fdt_addr=0x00f00000\0"                 \
        "kernel_addr=0x01000000\0"              \
        "scriptaddr=0x80000000\0"               \
        "scripthdraddr=0x80080000\0"            \
@@ -84,7 +82,6 @@
        "kernelhdr_addr_sd=0x3000\0"            \
        "kernelhdr_size_sd=0x20\0"              \
        "console=ttyS0,115200\0"                \
-       "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"        \
        BOOTENV                                 \
        "boot_scripts=ls1028ardb_boot.scr\0"    \
        "boot_script_hdr=hdr_ls1028ardb_bs.out\0"       \