global: Migrate CONFIG_STACKBASE to CFG

[platform/kernel/u-boot.git] / include / configs / ls1028aqds.h

diff --git a/include/configs/ls1028aqds.h b/include/configs/ls1028aqds.h
index b910169..769ece9 100644 (file)
--- a/include/configs/ls1028aqds.h
+++ b/include/configs/ls1028aqds.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2019-2020 NXP
+ * Copyright 2019-2021 NXP
  */
 
 #ifndef __LS1028A_QDS_H
@@ -8,24 +8,16 @@
 
 #include "ls1028a_common.h"
 
-#define CONFIG_SYS_CLK_FREQ            100000000
-#define CONFIG_DDR_CLK_FREQ            100000000
-#define COUNTER_FREQUENCY_REAL         (CONFIG_SYS_CLK_FREQ / 4)
-
-/* DDR */
-#define CONFIG_DIMM_SLOTS_PER_CTLR             2
-
-#define CONFIG_QIXIS_I2C_ACCESS
+#define COUNTER_FREQUENCY_REAL         (get_board_sys_clk() / 4)
 
 /*
  * QIXIS Definitions
  */
-#define CONFIG_FSL_QIXIS
 
 #ifdef CONFIG_FSL_QIXIS
 #define QIXIS_BASE                     0x7fb00000
 #define QIXIS_BASE_PHYS                        QIXIS_BASE
-#define CONFIG_SYS_I2C_FPGA_ADDR       0x66
+#define CFG_SYS_I2C_FPGA_ADDR  0x66
 #define QIXIS_LBMAP_SWITCH             1
 #define QIXIS_LBMAP_MASK               0x0f
 #define QIXIS_LBMAP_SHIFT              5
@@ -43,61 +35,38 @@
 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE  0x08
 #define QIXIS_RST_FORCE_MEM            0x01
 
-#define CONFIG_SYS_FPGA_CSPR_EXT       (0x0)
-#define CONFIG_SYS_FPGA_CSPR           (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) | \
+#define CFG_SYS_FPGA_CSPR_EXT  (0x0)
+#define CFG_SYS_FPGA_CSPR              (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) | \
                                        CSPR_PORT_SIZE_8 | \
                                        CSPR_MSEL_GPCM | \
                                        CSPR_V)
-#define CONFIG_SYS_FPGA_AMASK          IFC_AMASK(64 * 1024)
-#define CONFIG_SYS_FPGA_CSOR           (CSOR_NOR_ADM_SHIFT(4) | \
+#define CFG_SYS_FPGA_AMASK             IFC_AMASK(64 * 1024)
+#define CFG_SYS_FPGA_CSOR              (CSOR_NOR_ADM_SHIFT(4) | \
                                        CSOR_NOR_NOR_MODE_AVD_NOR | \
                                        CSOR_NOR_TRHZ_80)
 #endif
 
 /* RTC */
-#define CONFIG_SYS_RTC_BUS_NUM         1
+#define CFG_SYS_RTC_BUS_NUM         1
 #define I2C_MUX_CH_RTC                 0xB
 
 /* Store environment at top of flash */
 
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
-#else
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#endif
-
 /* LPUART */
 #ifdef CONFIG_LPUART
-#define CONFIG_LPUART_32B_REG
 #define CFG_LPUART_MUX_MASK    0xf0
 #define CFG_LPUART_EN          0xf0
 #endif
 
 /* SATA */
-#define CONFIG_SCSI_AHCI_PLAT
-
-#define CONFIG_SYS_SATA1                       AHCI_BASE_ADDR1
-#ifndef CONFIG_CMD_EXT2
-#define CONFIG_CMD_EXT2
-#endif
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID            1
-#define CONFIG_SYS_SCSI_MAX_LUN                        1
-#define CONFIG_SYS_SCSI_MAX_DEVICE             (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-                                               CONFIG_SYS_SCSI_MAX_LUN)
-/* DSPI */
-#ifdef CONFIG_FSL_DSPI
-#define CONFIG_SPI_FLASH_SST
-#define CONFIG_SPI_FLASH_EON
-#endif
 
 #ifndef SPL_NO_ENV
-#undef CONFIG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#undef CFG_EXTRA_ENV_SETTINGS
+#define CFG_EXTRA_ENV_SETTINGS \
        "board=ls1028aqds\0" \
        "hwconfig=fsl_ddr:bank_intlv=auto\0" \
        "ramdisk_addr=0x800000\0" \
        "ramdisk_size=0x2000000\0" \
-       "fdt_addr=0x00f00000\0" \
        "kernel_addr=0x01000000\0" \
        "scriptaddr=0x80000000\0" \
        "scripthdraddr=0x80080000\0" \
@@ -118,7 +87,6 @@
        "kernelhdr_addr_sd=0x3000\0" \
        "kernelhdr_size_sd=0x10\0" \
        "console=ttyS0,115200\0" \
-       "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
        BOOTENV \
        "boot_scripts=ls1028aqds_boot.scr\0" \
        "boot_script_hdr=hdr_ls1028aqds_bs.out\0" \
@@ -132,13 +100,6 @@
                        "run scan_dev_for_boot; " \
                  "fi; " \
                "done\0" \
-       "scan_dev_for_boot=" \
-               "echo Scanning ${devtype} " \
-                               "${devnum}:${distro_bootpart}...; " \
-               "for prefix in ${boot_prefixes}; do " \
-                       "run scan_dev_for_scripts; " \
-               "done;" \
-               "\0" \
        "boot_a_script=" \
                "load ${devtype} ${devnum}:${distro_bootpart} " \
                        "${scriptaddr} ${prefix}${script}; " \