Merge tag 'versal-qspi-for-v2022.10' of https://gitlab.denx.de/u-boot/custodians...

[platform/kernel/u-boot.git] / include / configs / ls1028aqds.h

diff --git a/include/configs/ls1028aqds.h b/include/configs/ls1028aqds.h
index b0e9441..2539115 100644 (file)
--- a/include/configs/ls1028aqds.h
+++ b/include/configs/ls1028aqds.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2019 NXP
+ * Copyright 2019-2021 NXP
  */
 
 #ifndef __LS1028A_QDS_H
@@ -8,19 +8,11 @@
 
 #include "ls1028a_common.h"
 
-#define CONFIG_SYS_CLK_FREQ            100000000
-#define CONFIG_DDR_CLK_FREQ            100000000
-#define COUNTER_FREQUENCY_REAL         (CONFIG_SYS_CLK_FREQ / 4)
-
-/* DDR */
-#define CONFIG_DIMM_SLOTS_PER_CTLR             2
-
-#define CONFIG_QIXIS_I2C_ACCESS
+#define COUNTER_FREQUENCY_REAL         (get_board_sys_clk() / 4)
 
 /*
  * QIXIS Definitions
  */
-#define CONFIG_FSL_QIXIS
 
 #ifdef CONFIG_FSL_QIXIS
 #define QIXIS_BASE                     0x7fb00000
@@ -59,30 +51,14 @@
 #define I2C_MUX_CH_RTC                 0xB
 
 /* Store environment at top of flash */
-#define CONFIG_ENV_SIZE                        0x2000
 
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
-#else
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+/* LPUART */
+#ifdef CONFIG_LPUART
+#define CFG_LPUART_MUX_MASK    0xf0
+#define CFG_LPUART_EN          0xf0
 #endif
 
 /* SATA */
-#define CONFIG_SCSI_AHCI_PLAT
-
-#define CONFIG_SYS_SATA1                       AHCI_BASE_ADDR1
-#ifndef CONFIG_CMD_EXT2
-#define CONFIG_CMD_EXT2
-#endif
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID            1
-#define CONFIG_SYS_SCSI_MAX_LUN                        1
-#define CONFIG_SYS_SCSI_MAX_DEVICE             (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-                                               CONFIG_SYS_SCSI_MAX_LUN)
-/* DSPI */
-#ifdef CONFIG_FSL_DSPI
-#define CONFIG_SPI_FLASH_SST
-#define CONFIG_SPI_FLASH_EON
-#endif
 
 #ifndef SPL_NO_ENV
 #undef CONFIG_EXTRA_ENV_SETTINGS
@@ -91,9 +67,6 @@
        "hwconfig=fsl_ddr:bank_intlv=auto\0" \
        "ramdisk_addr=0x800000\0" \
        "ramdisk_size=0x2000000\0" \
-       "fdt_high=0xffffffffffffffff\0" \
-       "initrd_high=0xffffffffffffffff\0" \
-       "fdt_addr=0x00f00000\0" \
        "kernel_addr=0x01000000\0" \
        "scriptaddr=0x80000000\0" \
        "scripthdraddr=0x80080000\0" \
@@ -102,18 +75,18 @@
        "load_addr=0xa0000000\0" \
        "kernel_addr_r=0x81000000\0" \
        "fdt_addr_r=0x90000000\0" \
+       "fdt2_addr_r=0x90010000\0" \
        "ramdisk_addr_r=0xa0000000\0" \
        "kernel_start=0x1000000\0" \
-       "kernelheader_start=0x800000\0" \
+       "kernelheader_start=0x600000\0" \
        "kernel_load=0xa0000000\0" \
        "kernel_size=0x2800000\0" \
        "kernelheader_size=0x40000\0" \
        "kernel_addr_sd=0x8000\0" \
        "kernel_size_sd=0x14000\0" \
-       "kernelhdr_addr_sd=0x4000\0" \
+       "kernelhdr_addr_sd=0x3000\0" \
        "kernelhdr_size_sd=0x10\0" \
        "console=ttyS0,115200\0" \
-       "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
        BOOTENV \
        "boot_scripts=ls1028aqds_boot.scr\0" \
        "boot_script_hdr=hdr_ls1028aqds_bs.out\0" \
@@ -127,13 +100,6 @@
                        "run scan_dev_for_boot; " \
                  "fi; " \
                "done\0" \
-       "scan_dev_for_boot=" \
-               "echo Scanning ${devtype} " \
-                               "${devnum}:${distro_bootpart}...; " \
-               "for prefix in ${boot_prefixes}; do " \
-                       "run scan_dev_for_scripts; " \
-               "done;" \
-               "\0" \
        "boot_a_script=" \
                "load ${devtype} ${devnum}:${distro_bootpart} " \
                        "${scriptaddr} ${prefix}${script}; " \
@@ -142,19 +108,35 @@
                        "${scripthdraddr} ${prefix}${boot_script_hdr} " \
                        "&& esbc_validate ${scripthdraddr};" \
                "source ${scriptaddr}\0" \
-       "sd_bootcmd=echo Trying load from SD ..;" \
-               "mmcinfo; mmc read $load_addr " \
-               "$kernel_addr_sd $kernel_size_sd && " \
+       "xspi_bootcmd=echo Trying load from FlexSPI flash ...;" \
+               "sf probe 0:0 && sf read $load_addr " \
+               "$kernel_start $kernel_size ; env exists secureboot &&" \
+               "sf read $kernelheader_addr_r $kernelheader_start " \
+               "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
+               " bootm $load_addr#$board\0" \
+       "xspi_hdploadcmd=echo Trying load HDP firmware from FlexSPI...;" \
+               "sf probe 0:0 && sf read $load_addr 0x940000 0x30000 " \
+               "&& hdp load $load_addr 0x2000\0"                       \
+       "sd_bootcmd=echo Trying load from SD ...;" \
+               "mmc dev 0; mmcinfo; mmc read $load_addr "              \
+               "$kernel_addr_sd $kernel_size_sd && "   \
                "env exists secureboot && mmc read $kernelheader_addr_r " \
-               "$kernelhdr_addr_sd $kernelhdr_size_sd " \
-               " && esbc_validate ${kernelheader_addr_r};" \
-               "bootm $load_addr#$board\0" \
-       "emmc_bootcmd=echo Trying load from EMMC ..;" \
-               "mmcinfo; mmc dev 1; mmc read $load_addr " \
-               "$kernel_addr_sd $kernel_size_sd && " \
+               "$kernelhdr_addr_sd $kernelhdr_size_sd "                \
+               " && esbc_validate ${kernelheader_addr_r};"     \
+               "bootm $load_addr#$board\0"             \
+       "sd_hdploadcmd=echo Trying load HDP firmware from SD..;"        \
+               "mmc dev 0;mmcinfo; mmc read $load_addr 0x4a00 0x200 "  \
+               "&& hdp load $load_addr 0x2000\0"       \
+       "emmc_bootcmd=echo Trying load from EMMC ..;"   \
+               "mmc dev 1; mmcinfo; mmc read $load_addr "              \
+               "$kernel_addr_sd $kernel_size_sd && "   \
                "env exists secureboot && mmc read $kernelheader_addr_r " \
-               "$kernelhdr_addr_sd $kernelhdr_size_sd " \
+               "$kernelhdr_addr_sd $kernelhdr_size_sd "                \
                " && esbc_validate ${kernelheader_addr_r};"     \
-               "bootm $load_addr#$board\0"
+               "bootm $load_addr#$board\0"                     \
+       "emmc_hdploadcmd=echo Trying load HDP firmware from EMMC..;"      \
+               "mmc dev 1;mmcinfo;mmc read $load_addr 0x4a00 0x200 "   \
+               "&& hdp load $load_addr 0x2000\0"
+
 #endif
 #endif /* __LS1028A_QDS_H */