/* SPDX-License-Identifier: GPL-2.0+ */
/*
- * Copyright 2019 NXP
+ * Copyright 2019-2021 NXP
*/
#ifndef __L1028A_COMMON_H
#define __L1028A_COMMON_H
#define CONFIG_REMAKE_ELF
-#define CONFIG_FSL_LAYERSCAPE
#define CONFIG_MP
#include <asm/arch/stream_id_lsch3.h>
/* Link Definitions */
#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
#define CONFIG_VERY_BIG_RAM
#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL
#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0
#define CONFIG_SYS_DDR_BLOCK2_BASE 0x2080000000ULL
#define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS 1
-#define CONFIG_CMD_MEMTEST
-#define CONFIG_SYS_MEMTEST_START 0x80000000
-#define CONFIG_SYS_MEMTEST_END 0x9fffffff
-
/*
* SMP Definitinos
*/
-#define CPU_RELEASE_ADDR secondary_boot_func
+#define CPU_RELEASE_ADDR secondary_boot_addr
/* Generic Timer Definitions */
#define COUNTER_FREQUENCY 25000000 /* 25MHz */
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2048 * 1024)
-/* I2C */
-#ifndef CONFIG_DM_I2C
-#define CONFIG_SYS_I2C
+/* GPIO */
+#ifdef CONFIG_DM_GPIO
+#ifndef CONFIG_MPC8XXX_GPIO
+#define CONFIG_MPC8XXX_GPIO
+#endif
#endif
+/* I2C */
+
/* Serial Port */
-#define CONFIG_CONS_INDEX 1
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE 1
#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0) / 2)
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/* Miscellaneous configurable options */
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
/* Physical Memory Map */
#define CONFIG_CHIP_SELECTS_PER_CTRL 4
#define CONFIG_HWCONFIG
#define HWCONFIG_BUFFER_SIZE 128
-/* Allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0) \
- func(USB, usb, 0)
+ func(MMC, mmc, 1) \
+ func(USB, usb, 0) \
+ func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
-/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "board=ls1028ardb\0" \
- "hwconfig=fsl_ddr:bank_intlv=auto\0" \
- "ramdisk_addr=0x800000\0" \
- "ramdisk_size=0x2000000\0" \
- "fdt_high=0xffffffffffffffff\0" \
- "initrd_high=0xffffffffffffffff\0" \
- "fdt_addr=0x00f00000\0" \
- "kernel_addr=0x01000000\0" \
- "scriptaddr=0x80000000\0" \
- "scripthdraddr=0x80080000\0" \
- "fdtheader_addr_r=0x80100000\0" \
- "kernelheader_addr_r=0x80200000\0" \
- "load_addr=0xa0000000\0" \
- "kernel_addr_r=0x81000000\0" \
- "fdt_addr_r=0x90000000\0" \
- "ramdisk_addr_r=0xa0000000\0" \
- "kernel_start=0x1000000\0" \
- "kernelheader_start=0x800000\0" \
- "kernel_load=0xa0000000\0" \
- "kernel_size=0x2800000\0" \
- "kernelheader_size=0x40000\0" \
- "kernel_addr_sd=0x8000\0" \
- "kernel_size_sd=0x14000\0" \
- "kernelhdr_addr_sd=0x4000\0" \
- "kernelhdr_size_sd=0x10\0" \
- "console=ttyS0,115200\0" \
- "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
- BOOTENV \
- "boot_scripts=ls1028ardb_boot.scr\0" \
- "boot_script_hdr=hdr_ls1028ardb_bs.out\0" \
- "scan_dev_for_boot_part=" \
- "part list ${devtype} ${devnum} devplist; " \
- "env exists devplist || setenv devplist 1; " \
- "for distro_bootpart in ${devplist}; do " \
- "if fstype ${devtype} " \
- "${devnum}:${distro_bootpart} " \
- "bootfstype; then " \
- "run scan_dev_for_boot; " \
- "fi; " \
- "done\0" \
- "scan_dev_for_boot=" \
- "echo Scanning ${devtype} " \
- "${devnum}:${distro_bootpart}...; " \
- "for prefix in ${boot_prefixes}; do " \
- "run scan_dev_for_scripts; " \
- "done;" \
- "\0" \
- "boot_a_script=" \
- "load ${devtype} ${devnum}:${distro_bootpart} " \
- "${scriptaddr} ${prefix}${script}; " \
- "env exists secureboot && load ${devtype} " \
- "${devnum}:${distro_bootpart} " \
- "${scripthdraddr} ${prefix}${boot_script_hdr} " \
- "&& esbc_validate ${scripthdraddr};" \
- "source ${scriptaddr}\0" \
- "sd_bootcmd=echo Trying load from SD ..;" \
- "mmcinfo; mmc read $load_addr " \
- "$kernel_addr_sd $kernel_size_sd && " \
- "env exists secureboot && mmc read $kernelheader_addr_r " \
- "$kernelhdr_addr_sd $kernelhdr_size_sd " \
- " && esbc_validate ${kernelheader_addr_r};" \
- "bootm $load_addr#$board\0" \
- "emmc_bootcmd=echo Trying load from EMMC ..;" \
- "mmcinfo; mmc dev 1; mmc read $load_addr " \
- "$kernel_addr_sd $kernel_size_sd && " \
- "env exists secureboot && mmc read $kernelheader_addr_r " \
- "$kernelhdr_addr_sd $kernelhdr_size_sd " \
- " && esbc_validate ${kernelheader_addr_r};" \
- "bootm $load_addr#$board\0"
-
#undef CONFIG_BOOTCOMMAND
+#define XSPI_NOR_BOOTCOMMAND \
+ "run xspi_hdploadcmd; run distro_bootcmd; run xspi_bootcmd; " \
+ "env exists secureboot && esbc_halt;;"
#define SD_BOOTCOMMAND \
- "run distro_bootcmd;run sd_bootcmd; " \
+ "run sd_hdploadcmd; run distro_bootcmd;run sd_bootcmd; " \
+ "env exists secureboot && esbc_halt;"
+#define SD2_BOOTCOMMAND \
+ "run emmc_hdploadcmd; run distro_bootcmd;run emmc_bootcmd; " \
"env exists secureboot && esbc_halt;"
/* Monitor Command Prompt */
sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */
-#ifndef CONFIG_CMDLINE_EDITING
-#define CONFIG_CMDLINE_EDITING 1
-#endif
-
#define CONFIG_SYS_MAXARGS 64 /* max command args */
#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
-/* MMC */
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#endif
-
-#define CONFIG_SYS_MMC_ENV_DEV 0
#define OCRAM_NONSECURE_SIZE 0x00010000
-#define CONFIG_ENV_OFFSET 0x500000 /* 5MB */
#define CONFIG_SYS_FSL_QSPI_BASE 0x20000000
-#define CONFIG_ENV_ADDR CONFIG_SYS_FSL_QSPI_BASE + CONFIG_ENV_OFFSET
-#define CONFIG_ENV_SIZE 0x2000 /* 8KB */
-#define CONFIG_ENV_SECT_SIZE 0x40000
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define I2C_MUX_CH_DEFAULT 0x8
/* EEPROM */
-#define CONFIG_ID_EEPROM
#define CONFIG_SYS_I2C_EEPROM_NXID
#define CONFIG_SYS_EEPROM_BUS_NUM 0
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
-#ifdef CONFIG_SECURE_BOOT
+/* DisplayPort */
+#define DP_PWD_EN_DEFAULT_MASK 0x8
+
+#ifdef CONFIG_NXP_ESBC
#include <asm/fsl_secure_boot.h>
#endif
projects / platform / kernel / u-boot.git / blobdiff