#ifndef __CONFIG_H
#define __CONFIG_H
-#define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE
+#define CFG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR
+#define CFG_SYS_INIT_RAM_SIZE OCRAM_SIZE
#define DDR_SDRAM_CFG 0x470c0008
#define DDR_CS0_BNDS 0x008000bf
#define SDRAM_CFG2_FRC_SR 0x80000000
#define SDRAM_CFG_BI 0x00000001
-#ifdef CONFIG_SD_BOOT
-#ifdef CONFIG_NXP_ESBC
-/*
- * HDR would be appended at end of image and copied to DDR along
- * with U-Boot image.
- */
-#define CONFIG_U_BOOT_HDR_SIZE (16 << 10)
-#endif /* ifdef CONFIG_NXP_ESBC */
-
-#ifdef CONFIG_U_BOOT_HDR_SIZE
-/*
- * HDR would be appended at end of image and copied to DDR along
- * with U-Boot image. Here u-boot max. size is 512K. So if binary
- * size increases then increase this size in case of secure boot as
- * it uses raw u-boot image instead of fit image.
- */
-#define CONFIG_SYS_MONITOR_LEN (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
-#else
-#define CONFIG_SYS_MONITOR_LEN 0x100000
-#endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */
-#endif
-
#define PHYS_SDRAM 0x80000000
#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024)
-#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL
-#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
+#define CFG_SYS_DDR_SDRAM_BASE 0x80000000UL
+#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE
/*
* IFC Definitions
*/
#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
-#define CONFIG_SYS_FLASH_BASE 0x60000000
-#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
+#define CFG_SYS_FLASH_BASE 0x60000000
+#define CFG_SYS_FLASH_BASE_PHYS CFG_SYS_FLASH_BASE
-#define CONFIG_SYS_NOR0_CSPR_EXT (0x0)
-#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
+#define CFG_SYS_NOR0_CSPR_EXT (0x0)
+#define CFG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CFG_SYS_FLASH_BASE_PHYS) | \
CSPR_PORT_SIZE_16 | \
CSPR_MSEL_NOR | \
CSPR_V)
-#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128 * 1024 * 1024)
+#define CFG_SYS_NOR_AMASK IFC_AMASK(128 * 1024 * 1024)
/* NOR Flash Timing Params */
-#define CONFIG_SYS_NOR_CSOR (CSOR_NOR_ADM_SHIFT(4) | \
+#define CFG_SYS_NOR_CSOR (CSOR_NOR_ADM_SHIFT(4) | \
CSOR_NOR_TRHZ_80)
-#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \
+#define CFG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \
FTIM0_NOR_TEADC(0x5) | \
FTIM0_NOR_TAVDS(0x0) | \
FTIM0_NOR_TEAHC(0x5))
-#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \
+#define CFG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \
FTIM1_NOR_TRAD_NOR(0x1A) | \
FTIM1_NOR_TSEQRAD_NOR(0x13))
-#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \
+#define CFG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \
FTIM2_NOR_TCH(0x4) | \
FTIM2_NOR_TWP(0x1c) | \
FTIM2_NOR_TWPH(0x0e))
-#define CONFIG_SYS_NOR_FTIM3 0
-
-#define CONFIG_SYS_FLASH_QUIET_TEST
-#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
+#define CFG_SYS_NOR_FTIM3 0
-#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */
-#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
+#define CFG_SYS_FLASH_BANKS_LIST { CFG_SYS_FLASH_BASE_PHYS }
-#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS }
-
-#define CONFIG_SYS_WRITE_SWAPPED_DATA
+#define CFG_SYS_WRITE_SWAPPED_DATA
#endif
/* CPLD */
-#define CONFIG_SYS_CPLD_BASE 0x7fb00000
-#define CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE
+#define CFG_SYS_CPLD_BASE 0x7fb00000
+#define CPLD_BASE_PHYS CFG_SYS_CPLD_BASE
-#define CONFIG_SYS_FPGA_CSPR_EXT (0x0)
-#define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \
+#define CFG_SYS_FPGA_CSPR_EXT (0x0)
+#define CFG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \
CSPR_PORT_SIZE_8 | \
CSPR_MSEL_GPCM | \
CSPR_V)
-#define CONFIG_SYS_FPGA_AMASK IFC_AMASK(64 * 1024)
-#define CONFIG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) | \
+#define CFG_SYS_FPGA_AMASK IFC_AMASK(64 * 1024)
+#define CFG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) | \
CSOR_NOR_NOR_MODE_AVD_NOR | \
CSOR_NOR_TRHZ_80)
/* CPLD Timing parameters for IFC GPCM */
-#define CONFIG_SYS_FPGA_FTIM0 (FTIM0_GPCM_TACSE(0xf) | \
+#define CFG_SYS_FPGA_FTIM0 (FTIM0_GPCM_TACSE(0xf) | \
FTIM0_GPCM_TEADC(0xf) | \
FTIM0_GPCM_TEAHC(0xf))
-#define CONFIG_SYS_FPGA_FTIM1 (FTIM1_GPCM_TACO(0xff) | \
+#define CFG_SYS_FPGA_FTIM1 (FTIM1_GPCM_TACO(0xff) | \
FTIM1_GPCM_TRAD(0x3f))
-#define CONFIG_SYS_FPGA_FTIM2 (FTIM2_GPCM_TCS(0xf) | \
+#define CFG_SYS_FPGA_FTIM2 (FTIM2_GPCM_TCS(0xf) | \
FTIM2_GPCM_TCH(0xf) | \
FTIM2_GPCM_TWP(0xff))
-#define CONFIG_SYS_FPGA_FTIM3 0x0
-#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT
-#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR
-#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK
-#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR
-#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0
-#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1
-#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2
-#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3
-#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_FPGA_CSPR_EXT
-#define CONFIG_SYS_CSPR1 CONFIG_SYS_FPGA_CSPR
-#define CONFIG_SYS_AMASK1 CONFIG_SYS_FPGA_AMASK
-#define CONFIG_SYS_CSOR1 CONFIG_SYS_FPGA_CSOR
-#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_FPGA_FTIM0
-#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_FPGA_FTIM1
-#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_FPGA_FTIM2
-#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_FPGA_FTIM3
+#define CFG_SYS_FPGA_FTIM3 0x0
+#define CFG_SYS_CSPR0_EXT CFG_SYS_NOR0_CSPR_EXT
+#define CFG_SYS_CSPR0 CFG_SYS_NOR0_CSPR
+#define CFG_SYS_AMASK0 CFG_SYS_NOR_AMASK
+#define CFG_SYS_CSOR0 CFG_SYS_NOR_CSOR
+#define CFG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0
+#define CFG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1
+#define CFG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2
+#define CFG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3
+#define CFG_SYS_CSPR1_EXT CFG_SYS_FPGA_CSPR_EXT
+#define CFG_SYS_CSPR1 CFG_SYS_FPGA_CSPR
+#define CFG_SYS_AMASK1 CFG_SYS_FPGA_AMASK
+#define CFG_SYS_CSOR1 CFG_SYS_FPGA_CSOR
+#define CFG_SYS_CS1_FTIM0 CFG_SYS_FPGA_FTIM0
+#define CFG_SYS_CS1_FTIM1 CFG_SYS_FPGA_FTIM1
+#define CFG_SYS_CS1_FTIM2 CFG_SYS_FPGA_FTIM2
+#define CFG_SYS_CS1_FTIM3 CFG_SYS_FPGA_FTIM3
/*
* Serial Port
*/
#ifndef CONFIG_LPUART
-#define CONFIG_SYS_NS16550_SERIAL
-#ifndef CONFIG_DM_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-#endif
-#define CONFIG_SYS_NS16550_CLK get_serial_clock()
+#define CFG_SYS_NS16550_CLK get_serial_clock()
#endif
/*
/* GPIO */
-/* EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_NXID
-#define CONFIG_SYS_EEPROM_BUS_NUM 1
+#define CFG_SMP_PEN_ADDR 0x01ee0200
-#define CONFIG_PEN_ADDR_BIG_ENDIAN
-#define CONFIG_SMP_PEN_ADDR 0x01ee0200
-
-#define CONFIG_HWCONFIG
#define HWCONFIG_BUFFER_SIZE 256
-#define CONFIG_FSL_DEVICE_DISABLE
-
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0) \
func(USB, usb, 0) \
#include <config_distro_bootcmd.h>
#ifdef CONFIG_LPUART
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"bootargs=root=/dev/ram0 rw console=ttyLP0,115200 " \
"cma=64M@0x0-0xb0000000\0" \
"initrd_high=0xffffffff\0" \
"cp.b $kernel_addr $load_addr " \
"$kernel_size && bootm $load_addr#$board\0"
#else
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"bootargs=root=/dev/ram0 rw console=ttyS0,115200 " \
"cma=64M@0x0-0xb0000000\0" \
"initrd_high=0xffffffff\0" \
/*
* Miscellaneous configurable options
*/
-#define CONFIG_SYS_BOOTMAPSZ (256 << 20)
-
-#define CONFIG_LS102XA_STREAM_ID
+#define CFG_SYS_BOOTMAPSZ (256 << 20)
/*
* Environment
projects / platform / kernel / u-boot.git / blobdiff