Rename CONFIG_EHCI_IS_TDI to CONFIG_USB_EHCI_IS_TDI

[platform/kernel/u-boot.git] / include / configs / ls1021aiot.h

diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h
index 4c448c6..7a7640a 100644 (file)
--- a/include/configs/ls1021aiot.h
+++ b/include/configs/ls1021aiot.h
@@ -11,16 +11,10 @@
 
 #define CONFIG_SYS_FSL_CLK
 
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN  (CONFIG_ENV_SIZE + 16 * 1024 * 1024)
-
 #define CONFIG_SYS_INIT_RAM_ADDR       OCRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE       OCRAM_SIZE
 
 #define CONFIG_SYS_CLK_FREQ            100000000
-#define CONFIG_DDR_CLK_FREQ            100000000
 
 /*
  * DDR: 800 MHz ( 1600 MT/s data rate )
@@ -53,21 +47,13 @@
 #define SDRAM_CFG2_FRC_SR              0x80000000
 #define SDRAM_CFG_BI                   0x00000001
 
-#ifdef CONFIG_RAMBOOT_PBL
-#define CONFIG_SYS_FSL_PBL_PBI \
-       board/freescale/ls1021aiot/ls102xa_pbi.cfg
-#endif
-
 #ifdef CONFIG_SD_BOOT
-#define CONFIG_SYS_FSL_PBL_RCW \
-       board/freescale/ls1021aiot/ls102xa_rcw_sd.cfg
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 #define CONFIG_SPL_ENV_SUPPORT
-#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 #define CONFIG_SPL_I2C
 #define CONFIG_SPL_WATCHDOG
-#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_MMC
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR        0xe8
 
 #define CONFIG_SPL_MAX_SIZE            0x1a000
@@ -98,23 +84,9 @@
  * I2C
  */
 
-#if !CONFIG_IS_ENABLED(DM_I2C)
-#define CONFIG_SYS_I2C_LEGACY
-#else
-#define CONFIG_I2C_SET_DEFAULT_BUS_NUM
-#define CONFIG_I2C_DEFAULT_BUS_NUMBER 0
-#endif
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
-
 /* EEPROM */
-#define CONFIG_ID_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_NXID
 #define CONFIG_SYS_EEPROM_BUS_NUM              0
-#define CONFIG_SYS_I2C_EEPROM_ADDR             0x51
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
 
 /*
  * MMC
@@ -175,8 +147,6 @@
 #define CONFIG_PCI_SCAN_SHOW
 #endif
 
-#define CONFIG_CMDLINE_TAG
-
 #define CONFIG_PEN_ADDR_BIG_ENDIAN
 #define CONFIG_LAYERSCAPE_NS_ACCESS
 #define CONFIG_SMP_PEN_ADDR            0x01ee0200
@@ -196,8 +166,6 @@
  */
 #define CONFIG_SYS_BOOTMAPSZ           (256 << 20)
 
-#define CONFIG_SYS_LOAD_ADDR           0x82000000
-
 #define CONFIG_LS102XA_STREAM_ID
 
 #define CONFIG_SYS_INIT_SP_OFFSET \