Rename CONFIG_EHCI_IS_TDI to CONFIG_USB_EHCI_IS_TDI

[platform/kernel/u-boot.git] / include / configs / ls1012ardb.h

diff --git a/include/configs/ls1012ardb.h b/include/configs/ls1012ardb.h
index a5e2740..c8a2f12 100644 (file)
--- a/include/configs/ls1012ardb.h
+++ b/include/configs/ls1012ardb.h
@@ -1,5 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
+ * Copyright 2020-2021 NXP
  * Copyright 2016 Freescale Semiconductor, Inc.
  */
 
@@ -12,15 +13,7 @@
 #define CONFIG_DIMM_SLOTS_PER_CTLR     1
 #define CONFIG_CHIP_SELECTS_PER_CTRL   1
 #define CONFIG_SYS_SDRAM_SIZE          0x40000000
-#define CONFIG_CMD_MEMINFO
-#define CONFIG_SYS_MEMTEST_START       0x80000000
-#define CONFIG_SYS_MEMTEST_END         0x9fffffff
 
-
-/* ENV */
-#define CONFIG_SYS_FSL_QSPI_BASE       0x40000000
-#define CONFIG_ENV_ADDR                        (CONFIG_SYS_FSL_QSPI_BASE + \
-                                        CONFIG_ENV_OFFSET)
 /*
  * I2C IO expander
  */
@@ -45,37 +38,27 @@
 #define __PHY_ETH2_MASK                0xFB
 #define __PHY_ETH1_MASK                0xFD
 
-/*  MMC  */
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#endif
-
-
 #define CONFIG_PCIE1           /* PCIE controller 1 */
 
 #define CONFIG_PCI_SCAN_SHOW
 
-#define CONFIG_CMD_MEMINFO
-#define CONFIG_SYS_MEMTEST_START       0x80000000
-#define CONFIG_SYS_MEMTEST_END         0x9fffffff
-
 #undef CONFIG_EXTRA_ENV_SETTINGS
 #define CONFIG_EXTRA_ENV_SETTINGS              \
        "verify=no\0"                           \
-       "fdt_high=0xffffffffffffffff\0"         \
        "initrd_high=0xffffffffffffffff\0"      \
        "fdt_addr=0x00f00000\0"                 \
        "kernel_addr=0x01000000\0"              \
-       "kernelheader_addr=0x800000\0"          \
+       "kernelheader_addr=0x600000\0"          \
        "scriptaddr=0x80000000\0"               \
        "scripthdraddr=0x80080000\0"            \
        "fdtheader_addr_r=0x80100000\0"         \
        "kernelheader_addr_r=0x80200000\0"      \
-       "kernel_addr_r=0x81000000\0"            \
+       "kernel_addr_r=0x96000000\0"            \
        "fdt_addr_r=0x90000000\0"               \
        "load_addr=0xa0000000\0"                \
        "kernel_size=0x2800000\0"               \
        "kernelheader_size=0x40000\0"           \
+       "bootm_size=0x10000000\0"               \
        "console=ttyS0,115200\0"                \
        BOOTENV                                 \
        "boot_scripts=ls1012ardb_boot.scr\0"    \
@@ -90,13 +73,6 @@
                      "run scan_dev_for_boot; " \
                  "fi; "                        \
              "done\0"                          \
-       "scan_dev_for_boot="                              \
-               "echo Scanning ${devtype} "               \
-                               "${devnum}:${distro_bootpart}...; "  \
-               "for prefix in ${boot_prefixes}; do "     \
-                       "run scan_dev_for_scripts; "      \
-               "done;"                                   \
-               "\0"                                      \
        "boot_a_script="                                  \
                "load ${devtype} ${devnum}:${distro_bootpart} "  \
                        "${scriptaddr} ${prefix}${script}; "    \
@@ -119,10 +95,10 @@
 #undef CONFIG_BOOTCOMMAND
 #ifdef CONFIG_TFABOOT
 #undef QSPI_NOR_BOOTCOMMAND
-#define QSPI_NOR_BOOTCOMMAND "pfe stop; run distro_bootcmd; run qspi_bootcmd; "\
+#define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "\
                             "env exists secureboot && esbc_halt;"
 #else
-#define CONFIG_BOOTCOMMAND "pfe stop; run distro_bootcmd; run qspi_bootcmd; "\
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "\
                           "env exists secureboot && esbc_halt;"
 #endif