#define CONFIG_SYS_MEMTEST_START 0x80000000
#define CONFIG_SYS_MEMTEST_END 0x9fffffff
-/*
-* USB
-*/
-#define CONFIG_HAS_FSL_XHCI_USB
-
-#ifdef CONFIG_HAS_FSL_XHCI_USB
-#define CONFIG_USB_XHCI_FSL
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
-#endif
/*
* I2C IO expander
*/
-#define I2C_MUX_IO1_ADDR 0x24
-#define __SW_BOOT_MASK 0xFC
-#define __SW_BOOT_EMU 0x10
-#define __SW_BOOT_BANK1 0x00
-#define __SW_BOOT_BANK2 0x01
-#define __SW_REV_MASK 0x07
-#define __SW_REV_A 0xF8
-#define __SW_REV_B 0xF0
+#define I2C_MUX_IO_ADDR 0x24
+#define I2C_MUX_IO_0 0
+#define I2C_MUX_IO_1 1
+#define SW_BOOT_MASK 0x03
+#define SW_BOOT_EMU 0x02
+#define SW_BOOT_BANK1 0x00
+#define SW_BOOT_BANK2 0x01
+#define SW_REV_MASK 0xF8
+#define SW_REV_A 0xF8
+#define SW_REV_B 0xF0
+#define SW_REV_C 0xE8
+#define SW_REV_C1 0xE0
+#define SW_REV_C2 0xD8
+#define SW_REV_D 0xD0
+#define SW_REV_E 0xC8
/* MMC */
#ifdef CONFIG_MMC
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
#endif
/* SATA */
-#define CONFIG_LIBATA
-#define CONFIG_SCSI
-#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_CMD_SCSI
-#define CONFIG_DOS_PARTITION
-#define CONFIG_BOARD_LATE_INIT
#define CONFIG_SYS_SATA AHCI_BASE_ADDR
#define CONFIG_SYS_SCSI_MAX_LUN 1
#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
CONFIG_SYS_SCSI_MAX_LUN)
+
#define CONFIG_PCIE1 /* PCIE controller 1 */
-#define FSL_PCIE_COMPAT "fsl,ls1043a-pcie"
-#define CONFIG_NET_MULTI
#define CONFIG_PCI_SCAN_SHOW
-#define CONFIG_CMD_PCI
#define CONFIG_CMD_MEMINFO
#define CONFIG_CMD_MEMTEST
#define CONFIG_SYS_MEMTEST_START 0x80000000
#define CONFIG_SYS_MEMTEST_END 0x9fffffff
+#undef CONFIG_EXTRA_ENV_SETTINGS
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "verify=no\0" \
+ "fdt_high=0xffffffffffffffff\0" \
+ "initrd_high=0xffffffffffffffff\0" \
+ "fdt_addr=0x00f00000\0" \
+ "kernel_addr=0x01000000\0" \
+ "scriptaddr=0x80000000\0" \
+ "fdtheader_addr_r=0x80100000\0" \
+ "kernelheader_addr_r=0x80200000\0" \
+ "kernel_addr_r=0x81000000\0" \
+ "fdt_addr_r=0x90000000\0" \
+ "load_addr=0xa0000000\0" \
+ "kernel_size=0x2800000\0" \
+ "console=ttyS0,115200\0" \
+ BOOTENV \
+ "boot_scripts=ls1012ardb_boot.scr\0" \
+ "scan_dev_for_boot_part=" \
+ "part list ${devtype} ${devnum} devplist; " \
+ "env exists devplist || setenv devplist 1; " \
+ "for distro_bootpart in ${devplist}; do " \
+ "if fstype ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "bootfstype; then " \
+ "run scan_dev_for_boot; " \
+ "fi; " \
+ "done\0" \
+ "scan_dev_for_boot=" \
+ "echo Scanning ${devtype} " \
+ "${devnum}:${distro_bootpart}...; " \
+ "for prefix in ${boot_prefixes}; do " \
+ "run scan_dev_for_scripts; " \
+ "done;" \
+ "\0" \
+ "installer=load mmc 0:2 $load_addr " \
+ "/flex_installer_arm64.itb; " \
+ "bootm $load_addr#$board\0" \
+ "qspi_bootcmd=echo Trying load from qspi..;" \
+ "sf probe && sf read $load_addr " \
+ "$kernel_addr $kernel_size && bootm $load_addr#$board\0"
+
+#undef CONFIG_BOOTCOMMAND
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd;run qspi_bootcmd"
+
+#include <asm/fsl_secure_boot.h>
+
#endif /* __LS1012ARDB_H__ */