Merge tag 'u-boot-atmel-fixes-2021.01-b' of https://gitlab.denx.de/u-boot/custodians...

[platform/kernel/u-boot.git] / include / configs / ls1012aqds.h

diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h
index af5f37c..c4c9b7f 100644 (file)
--- a/include/configs/ls1012aqds.h
+++ b/include/configs/ls1012aqds.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2016 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __LS1012AQDS_H__
@@ -12,12 +11,7 @@
 /* DDR */
 #define CONFIG_DIMM_SLOTS_PER_CTLR     1
 #define CONFIG_CHIP_SELECTS_PER_CTRL   1
-#define CONFIG_NR_DRAM_BANKS           2
 #define CONFIG_SYS_SDRAM_SIZE          0x40000000
-#define CONFIG_CMD_MEMINFO
-#define CONFIG_CMD_MEMTEST
-#define CONFIG_SYS_MEMTEST_START       0x80000000
-#define CONFIG_SYS_MEMTEST_END         0x9fffffff
 
 /*
  * QIXIS Definitions
@@ -56,7 +50,6 @@
 * RTC configuration
 */
 #define RTC
-#define CONFIG_RTC_PCF8563 1
 #define CONFIG_SYS_I2C_RTC_ADDR         0x51  /* Channel 3*/
 
 /* EEPROM */
@@ -77,9 +70,7 @@
 
 /* DSPI */
 #define CONFIG_FSL_DSPI1
-#define CONFIG_DEFAULT_SPI_BUS 1
 
-#define CONFIG_CMD_SPI
 #define MMAP_DSPI          DSPI1_BASE_ADDR
 
 #define CONFIG_SYS_DSPI_CTAR0   1
@@ -102,47 +93,76 @@
                                DSPI_CTAR_DT(0))
 #define CONFIG_SPI_FLASH_EON /* cs3 */
 
-#define CONFIG_SF_DEFAULT_SPEED      10000000
-#define CONFIG_SF_DEFAULT_MODE       SPI_MODE_0
-#define CONFIG_SF_DEFAULT_BUS        1
-#define CONFIG_SF_DEFAULT_CS         0
-
-/*
-* USB
-*/
-/* EHCI Support - disbaled by default */
-/*#define CONFIG_HAS_FSL_DR_USB*/
-
-#ifdef CONFIG_HAS_FSL_DR_USB
-#define CONFIG_USB_EHCI_FSL
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#endif
-
 /*  MMC  */
 #ifdef CONFIG_MMC
-#define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 #endif
 
-/* SATA */
-#define CONFIG_SCSI_AHCI_PLAT
-
-#define CONFIG_SYS_SATA                                AHCI_BASE_ADDR
-
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID            1
-#define CONFIG_SYS_SCSI_MAX_LUN                        1
-#define CONFIG_SYS_SCSI_MAX_DEVICE             (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-                                               CONFIG_SYS_SCSI_MAX_LUN)
-
 #define CONFIG_PCIE1           /* PCIE controller 1 */
 
 #define CONFIG_PCI_SCAN_SHOW
 
-#define CONFIG_CMD_MEMINFO
-#define CONFIG_CMD_MEMTEST
-#define CONFIG_SYS_MEMTEST_START       0x80000000
-#define CONFIG_SYS_MEMTEST_END         0x9fffffff
-
-#define CONFIG_MISC_INIT_R
+#undef CONFIG_EXTRA_ENV_SETTINGS
+#define CONFIG_EXTRA_ENV_SETTINGS              \
+       "verify=no\0"                           \
+       "fdt_addr=0x00f00000\0"                 \
+       "kernel_addr=0x01000000\0"              \
+       "kernelheader_addr=0x600000\0"          \
+       "scriptaddr=0x80000000\0"               \
+       "scripthdraddr=0x80080000\0"            \
+       "fdtheader_addr_r=0x80100000\0"         \
+       "kernelheader_addr_r=0x80200000\0"      \
+       "kernel_addr_r=0x96000000\0"            \
+       "fdt_addr_r=0x90000000\0"               \
+       "load_addr=0xa0000000\0"                \
+       "kernel_size=0x2800000\0"               \
+       "kernelheader_size=0x40000\0"           \
+       "console=ttyS0,115200\0"                \
+       BOOTENV                                 \
+       "boot_scripts=ls1012aqds_boot.scr\0"    \
+       "boot_script_hdr=hdr_ls1012aqds_bs.out\0"       \
+       "scan_dev_for_boot_part="               \
+            "part list ${devtype} ${devnum} devplist; "        \
+            "env exists devplist || setenv devplist 1; "       \
+            "for distro_bootpart in ${devplist}; do "          \
+                 "if fstype ${devtype} "                       \
+                     "${devnum}:${distro_bootpart} "           \
+                     "bootfstype; then "                       \
+                     "run scan_dev_for_boot; " \
+                 "fi; "                        \
+             "done\0"                          \
+       "scan_dev_for_boot="                              \
+               "echo Scanning ${devtype} "               \
+                               "${devnum}:${distro_bootpart}...; "  \
+               "for prefix in ${boot_prefixes}; do "     \
+                       "run scan_dev_for_scripts; "      \
+               "done;"                                   \
+               "\0"                                      \
+       "boot_a_script="                                  \
+               "load ${devtype} ${devnum}:${distro_bootpart} "  \
+                       "${scriptaddr} ${prefix}${script}; "    \
+               "env exists secureboot && load ${devtype} "     \
+                       "${devnum}:${distro_bootpart} "         \
+                       "${scripthdraddr} ${prefix}${boot_script_hdr}; " \
+                       "env exists secureboot "        \
+                       "&& esbc_validate ${scripthdraddr};"    \
+               "source ${scriptaddr}\0"          \
+       "qspi_bootcmd=pfe stop; echo Trying load from qspi..;"  \
+               "sf probe 0:0 && sf read $load_addr "   \
+               "$kernel_addr $kernel_size; env exists secureboot "     \
+               "&& sf read $kernelheader_addr_r $kernelheader_addr "   \
+               "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
+               "bootm $load_addr#$board\0"
+
+#undef CONFIG_BOOTCOMMAND
+#ifdef CONFIG_TFABOOT
+#undef QSPI_NOR_BOOTCOMMAND
+#define QSPI_NOR_BOOTCOMMAND "pfe stop; run distro_bootcmd; run qspi_bootcmd; "\
+                            "env exists secureboot && esbc_halt;"
+#else
+#define CONFIG_BOOTCOMMAND "pfe stop; run distro_bootcmd; run qspi_bootcmd; "\
+                          "env exists secureboot && esbc_halt;"
+#endif
 
+#include <asm/fsl_secure_boot.h>
 #endif /* __LS1012AQDS_H__ */