Rename CONFIG_EHCI_IS_TDI to CONFIG_USB_EHCI_IS_TDI

[platform/kernel/u-boot.git] / include / configs / ls1012afrwy.h

diff --git a/include/configs/ls1012afrwy.h b/include/configs/ls1012afrwy.h
index 6143e97..f8b3861 100644 (file)
--- a/include/configs/ls1012afrwy.h
+++ b/include/configs/ls1012afrwy.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2018 NXP
+ * Copyright 2018, 2021 NXP
  */
 
 #ifndef __LS1012AFRWY_H__
@@ -21,10 +21,6 @@
 #define SYS_SDRAM_SIZE_512             0x20000000
 #define SYS_SDRAM_SIZE_1024            0x40000000
 #define CONFIG_CHIP_SELECTS_PER_CTRL   1
-#define CONFIG_CMD_MEMINFO
-#define CONFIG_CMD_MEMTEST
-#define CONFIG_SYS_MEMTEST_START       0x80000000
-#define CONFIG_SYS_MEMTEST_END         0x9fffffff
 
 /* ENV */
 #define CONFIG_SYS_FSL_QSPI_BASE       0x40000000
@@ -33,15 +29,8 @@
 #undef BOOT_TARGET_DEVICES
 #define BOOT_TARGET_DEVICES(func) \
        func(MMC, mmc, 0) \
-       func(USB, usb, 0)
-#endif
-
-#undef FSL_QSPI_FLASH_SIZE
-#define FSL_QSPI_FLASH_SIZE            SZ_16M
-
-/*  MMC  */
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
+       func(USB, usb, 0) \
+       func(DHCP, dhcp, na)
 #endif
 
 #define CONFIG_PCIE1           /* PCIE controller 1 */
@@ -51,7 +40,6 @@
 #undef CONFIG_EXTRA_ENV_SETTINGS
 #define CONFIG_EXTRA_ENV_SETTINGS              \
        "verify=no\0"                           \
-       "fdt_high=0xffffffffffffffff\0"         \
        "initrd_high=0xffffffffffffffff\0"      \
        "fdt_addr=0x00f00000\0"                 \
        "kernel_addr=0x01000000\0"              \
@@ -71,6 +59,7 @@
        "load_addr=0x92000000\0"                \
        "kernel_size=0x2800000\0"               \
        "kernelheader_size=0x40000\0"           \
+       "bootm_size=0x10000000\0"               \
        "console=ttyS0,115200\0"                \
        "BOARD=ls1012afrwy\0"                   \
        BOOTENV                                 \
@@ -86,13 +75,6 @@
                      "run scan_dev_for_boot; " \
                  "fi; "                        \
              "done\0"                          \
-       "scan_dev_for_boot="                              \
-               "echo Scanning ${devtype} "               \
-                               "${devnum}:${distro_bootpart}...; "  \
-               "for prefix in ${boot_prefixes}; do "     \
-                       "run scan_dev_for_scripts; "      \
-               "done;"                                   \
-               "\0"                                      \
        "boot_a_script="                                  \
                "load ${devtype} ${devnum}:${distro_bootpart} "  \
                        "${scriptaddr} ${prefix}${script}; "    \
@@ -102,16 +84,7 @@
                        "env exists secureboot "        \
                        "&& esbc_validate ${scripthdraddr};"    \
                "source ${scriptaddr}\0"          \
-       "installer=load mmc 0:2 $load_addr "    \
-                  "/flex_installer_arm64.itb; "        \
-                  "bootm $load_addr#$BOARD\0"  \
-       "qspi_bootcmd=pfe stop; echo Trying load from qspi..;"  \
-               "sf probe && sf read $load_addr "       \
-               "$kernel_addr $kernel_size; env exists secureboot "     \
-               "&& sf read $kernelheader_addr_r $kernelheader_addr "   \
-               "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
-               "bootm $load_addr#$BOARD\0"     \
-       "sd_bootcmd=pfe stop; echo Trying load from sd card..;"         \
+       "sd_bootcmd=echo Trying load from sd card..;"           \
                "mmcinfo; mmc read $load_addr "                 \
                "$kernel_addr_sd $kernel_size_sd ;"             \
                "env exists secureboot && mmc read $kernelheader_addr_r "\
@@ -122,16 +95,12 @@
 #undef CONFIG_BOOTCOMMAND
 #ifdef CONFIG_TFABOOT
 #undef QSPI_NOR_BOOTCOMMAND
-#define QSPI_NOR_BOOTCOMMAND "pfe stop; run distro_bootcmd; run sd_bootcmd; "\
+#define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "\
                             "env exists secureboot && esbc_halt;"
 #else
-#define CONFIG_BOOTCOMMAND "pfe stop; run distro_bootcmd; run sd_bootcmd; "\
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "\
                           "env exists secureboot && esbc_halt;"
 #endif
-#define CONFIG_CMD_MEMINFO
-#define CONFIG_CMD_MEMTEST
-#define CONFIG_SYS_MEMTEST_START       0x80000000
-#define CONFIG_SYS_MEMTEST_END         0x9fffffff
 
 #include <asm/fsl_secure_boot.h>