Merge git://git.denx.de/u-boot-fsl-qoriq

[platform/kernel/u-boot.git] / include / configs / ls1012a_common.h

diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h
index 80603c9..bd9b0d3 100644 (file)
--- a/include/configs/ls1012a_common.h
+++ b/include/configs/ls1012a_common.h
@@ -11,7 +11,7 @@
 #define CONFIG_GICV2
 
 #include <asm/arch/config.h>
-#define CONFIG_SYS_NO_FLASH
+#include <asm/arch/stream_id_lsch2.h>
 
 #define CONFIG_SUPPORT_RAW_INITRD
 
@@ -19,12 +19,9 @@
 
 #define CONFIG_SYS_TEXT_BASE           0x40100000
 
-#define CONFIG_SYS_FSL_CLK
-#define CONFIG_SYS_CLK_FREQ            100000000
-#define CONFIG_DDR_CLK_FREQ            125000000
+#define CONFIG_SYS_CLK_FREQ            125000000
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_BOARD_EARLY_INIT_F      1
 
 #define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
 #define CONFIG_SYS_LOAD_ADDR   (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
@@ -32,6 +29,7 @@
 #define CONFIG_SYS_DDR_SDRAM_BASE      0x80000000
 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY      0
 #define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
+#define CONFIG_SYS_DDR_BLOCK2_BASE     0x880000000ULL
 
 /* Generic Timer Definitions */
 #define COUNTER_FREQUENCY              CONFIG_SYS_CLK_FREQ/4   /* 25MHz */
@@ -57,9 +55,8 @@
 #define CONFIG_FSL_QSPI
 #define QSPI0_AMBA_BASE                0x40000000
 #define CONFIG_SPI_FLASH_SPANSION
-#define CONFIG_SPI_FLASH_BAR
 
-#define FSL_QSPI_FLASH_SIZE            (1 << 24)
+#define FSL_QSPI_FLASH_SIZE            SZ_64M
 #define FSL_QSPI_FLASH_NUM             2
 
 /*
@@ -82,17 +79,13 @@
 #define CONFIG_CONS_INDEX       1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE     1
-#define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
+#define CONFIG_SYS_NS16550_CLK          (get_serial_clock())
 
-#define CONFIG_BAUDRATE                        115200
 #define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 
 /* Command line configuration */
-#define CONFIG_CMD_ENV
 #undef CONFIG_CMD_IMLS
 
-#define CONFIG_ARCH_EARLY_INIT_R
-
 #define CONFIG_SYS_HZ                  1000
 
 #define CONFIG_HWCONFIG
@@ -110,7 +103,7 @@
        "kernel_size=0x2800000\0"               \
 
 #define CONFIG_BOOTARGS                "console=ttyS0,115200 root=/dev/ram0 " \
-                               "earlycon=uart8250,mmio,0x21c0500"
+                               "earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000"
 #define CONFIG_BOOTCOMMAND             "sf probe 0:0; sf read $kernel_load "\
                                        "$kernel_start $kernel_size && "\
                                        "bootm $kernel_load"
@@ -128,6 +121,4 @@
 #define CONFIG_PANIC_HANG
 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 
-#include <asm/fsl_secure_boot.h>
-
 #endif /* __LS1012A_COMMON_H */