global: Migrate CONFIG_MXC_UART_BASE to CFG

[platform/kernel/u-boot.git] / include / configs / ls1012a_common.h

diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h
index f6b5d47..a5f680d 100644 (file)
--- a/include/configs/ls1012a_common.h
+++ b/include/configs/ls1012a_common.h
@@ -6,91 +6,35 @@
 #ifndef __LS1012A_COMMON_H
 #define __LS1012A_COMMON_H
 
-#define CONFIG_GICV2
-
 #include <asm/arch/config.h>
 #include <asm/arch/stream_id_lsch2.h>
 #include <linux/sizes.h>
 
-#define CONFIG_SYS_CLK_FREQ            125000000
-
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-#ifdef CONFIG_TFABOOT
-#define CONFIG_SYS_INIT_SP_ADDR                CONFIG_SYS_TEXT_BASE
-#else
-#define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
-#endif
-#define CONFIG_SYS_LOAD_ADDR   (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
-
-#define CONFIG_SYS_DDR_SDRAM_BASE      0x80000000
-#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY      0
-#define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
-#define CONFIG_SYS_DDR_BLOCK2_BASE     0x880000000ULL
-
-/* Generic Timer Definitions */
-#define COUNTER_FREQUENCY              25000000        /* 25MHz */
-
-/* CSU */
-#define CONFIG_LAYERSCAPE_NS_ACCESS
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN          (5 * SZ_1M)
-
-/* PFE */
-#define CONFIG_SYS_FMAN_FW_ADDR                0x400d0000
-#define CONFIG_SYS_QE_FMAN_FW_LENGTH   0x300000
+#define CFG_SYS_DDR_SDRAM_BASE 0x80000000
+#define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY 0
+#define CFG_SYS_SDRAM_BASE             CFG_SYS_DDR_SDRAM_BASE
+#define CFG_SYS_DDR_BLOCK2_BASE     0x880000000ULL
 
 /*SPI device */
-#define CONFIG_SYS_FSL_QSPI_BASE       0x40000000
-
-/* SATA */
-#define CONFIG_SCSI_AHCI_PLAT
-
-#define CONFIG_SYS_SATA                                AHCI_BASE_ADDR
-
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID            1
-#define CONFIG_SYS_SCSI_MAX_LUN                        1
-#define CONFIG_SYS_SCSI_MAX_DEVICE             (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-                                               CONFIG_SYS_SCSI_MAX_LUN)
+#define CFG_SYS_FSL_QSPI_BASE  0x40000000
 
 /* I2C */
-#ifndef CONFIG_DM_I2C
-#define CONFIG_SYS_I2C
-#else
-#define CONFIG_I2C_SET_DEFAULT_BUS_NUM
-#define CONFIG_I2C_DEFAULT_BUS_NUMBER 0
-#endif
 
 /* GPIO */
-#ifdef CONFIG_DM_GPIO
-#ifndef CONFIG_MPC8XXX_GPIO
-#define CONFIG_MPC8XXX_GPIO
-#endif
-#endif
-
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE     1
-#define CONFIG_SYS_NS16550_CLK          (get_serial_clock())
-
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 
-#define CONFIG_SYS_HZ                  1000
+#define CFG_SYS_NS16550_CLK          (get_serial_clock())
 
-#define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE           128
 
-#ifndef CONFIG_SPL_BUILD
 #define BOOT_TARGET_DEVICES(func) \
        func(MMC, mmc, 0) \
        func(USB, usb, 0) \
        func(SCSI, scsi, 0) \
        func(DHCP, dhcp, na)
 #include <config_distro_bootcmd.h>
-#endif
 
 /* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS              \
+#define CFG_EXTRA_ENV_SETTINGS         \
        "verify=no\0"                           \
        "loadaddr=0x80100000\0"                 \
        "kernel_addr=0x100000\0"                \
@@ -100,23 +44,12 @@
        "kernel_size=0x2800000\0"               \
        "bootm_size=0x10000000\0"               \
 
-#undef CONFIG_BOOTCOMMAND
 #ifdef CONFIG_TFABOOT
-#define QSPI_NOR_BOOTCOMMAND   "pfe stop; sf probe 0:0; sf read $kernel_load "\
-                               "$kernel_start $kernel_size && "\
-                               "bootm $kernel_load"
-#else
-#define CONFIG_BOOTCOMMAND     "pfe stop; sf probe 0:0; sf read $kernel_load "\
+#define QSPI_NOR_BOOTCOMMAND   "sf probe 0:0; sf read $kernel_load "\
                                "$kernel_start $kernel_size && "\
                                "bootm $kernel_load"
 #endif
 
-/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE              512     /* Console I/O Buffer Size */
-#define CONFIG_SYS_MAXARGS             64      /* max command args */
-
-#define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
-
 #include <asm/arch/soc.h>
 
 #endif /* __LS1012A_COMMON_H */