Merge https://gitlab.denx.de/u-boot/custodians/u-boot-imx

[platform/kernel/u-boot.git] / include / configs / ls1012a2g5rdb.h

diff --git a/include/configs/ls1012a2g5rdb.h b/include/configs/ls1012a2g5rdb.h
index 25df103..bbc3ffd 100644 (file)
--- a/include/configs/ls1012a2g5rdb.h
+++ b/include/configs/ls1012a2g5rdb.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2017 NXP
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __LS1012A2G5RDB_H__
@@ -9,28 +8,13 @@
 
 #include "ls1012a_common.h"
 
-/* PFE Ethernet */
-#ifdef CONFIG_FSL_PFE
-#define EMAC1_PHY_ADDR          0x2
-#define EMAC2_PHY_ADDR          0x1
-#define CONFIG_PHYLIB
-#define CONFIG_PHYLIB_10G
-#define CONFIG_PHY_AQUANTIA
-#endif
-
 /* DDR */
 #define CONFIG_DIMM_SLOTS_PER_CTLR     1
 #define CONFIG_CHIP_SELECTS_PER_CTRL   1
-#define CONFIG_NR_DRAM_BANKS           2
 #define CONFIG_SYS_SDRAM_SIZE          0x40000000
-#define CONFIG_CMD_MEMINFO
-#define CONFIG_CMD_MEMTEST
-#define CONFIG_SYS_MEMTEST_START       0x80000000
-#define CONFIG_SYS_MEMTEST_END         0x9fffffff
 
 /*  MMC  */
 #ifdef CONFIG_MMC
-#define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 #endif
 
@@ -45,17 +29,10 @@
 #define CONFIG_SYS_SCSI_MAX_LUN                        1
 #define CONFIG_SYS_SCSI_MAX_DEVICE             (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
                                                CONFIG_SYS_SCSI_MAX_LUN)
-#define CONFIG_NET_MULTI
-
-#define CONFIG_CMD_MEMINFO
-#define CONFIG_CMD_MEMTEST
-#define CONFIG_SYS_MEMTEST_START       0x80000000
-#define CONFIG_SYS_MEMTEST_END         0x9fffffff
 
 #undef CONFIG_EXTRA_ENV_SETTINGS
 #define CONFIG_EXTRA_ENV_SETTINGS              \
        "verify=no\0"                           \
-       "fdt_high=0xffffffffffffffff\0"         \
        "initrd_high=0xffffffffffffffff\0"      \
        "fdt_addr=0x00f00000\0"                 \
        "kernel_addr=0x01000000\0"              \
@@ -69,6 +46,7 @@
        "load_addr=0xa0000000\0"                \
        "kernel_size=0x2800000\0"               \
        "kernelheader_size=0x40000\0"           \
+       "bootm_size=0x10000000\0"               \
        "console=ttyS0,115200\0"                \
        BOOTENV                                 \
        "boot_scripts=ls1012ardb_boot.scr\0"    \
@@ -101,7 +79,7 @@
        "installer=load mmc 0:2 $load_addr "    \
                   "/flex_installer_arm64.itb; "        \
                   "bootm $load_addr#$board\0"  \
-       "qspi_bootcmd=echo Trying load from qspi..;"    \
+       "qspi_bootcmd=pfe stop; echo Trying load from qspi..;"  \
                "sf probe && sf read $load_addr "       \
                "$kernel_addr $kernel_size; env exists secureboot "     \
                "&& sf read $kernelheader_addr_r $kernelheader_addr "   \
@@ -109,10 +87,16 @@
                "bootm $load_addr#$board\0"
 
 #undef CONFIG_BOOTCOMMAND
+#ifdef CONFIG_TFABOOT
+#undef QSPI_NOR_BOOTCOMMAND
+#define QSPI_NOR_BOOTCOMMAND "pfe stop;run distro_bootcmd; run qspi_bootcmd; " \
+                            "env exists secureboot && esbc_halt;"
+#else
 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
-#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \
+#define CONFIG_BOOTCOMMAND "pfe stop;run distro_bootcmd; run qspi_bootcmd; " \
                           "env exists secureboot && esbc_halt;"
 #endif
+#endif
 
 #define DEFAULT_PFE_MDIO_NAME "PFE_MDIO"
 #define DEFAULT_PFE_MDIO1_NAME "PFE_MDIO1"