Merge tag 'next-20220328' of https://source.denx.de/u-boot/custodians/u-boot-video...

[platform/kernel/u-boot.git] / include / configs / ls1012a2g5rdb.h

diff --git a/include/configs/ls1012a2g5rdb.h b/include/configs/ls1012a2g5rdb.h
index 57e42b9..8191c85 100644 (file)
--- a/include/configs/ls1012a2g5rdb.h
+++ b/include/configs/ls1012a2g5rdb.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2017 NXP
- *
- * SPDX-License-Identifier:    GPL-2.0+
+ * Copyright 2017, 2021 NXP
  */
 
 #ifndef __LS1012A2G5RDB_H__
@@ -11,40 +10,15 @@
 
 /* DDR */
 #define CONFIG_DIMM_SLOTS_PER_CTLR     1
-#define CONFIG_CHIP_SELECTS_PER_CTRL   1
-#define CONFIG_NR_DRAM_BANKS           2
 #define CONFIG_SYS_SDRAM_SIZE          0x40000000
-#define CONFIG_CMD_MEMINFO
-#define CONFIG_SYS_MEMTEST_START       0x80000000
-#define CONFIG_SYS_MEMTEST_END         0x9fffffff
-
-/*  MMC  */
-#ifdef CONFIG_MMC
-#define CONFIG_FSL_ESDHC
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#endif
 
 /* SATA */
-#define CONFIG_LIBATA
-#define CONFIG_SCSI_AHCI
-#define CONFIG_SCSI_AHCI_PLAT
 
 #define CONFIG_SYS_SATA                                AHCI_BASE_ADDR
 
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID            1
-#define CONFIG_SYS_SCSI_MAX_LUN                        1
-#define CONFIG_SYS_SCSI_MAX_DEVICE             (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-                                               CONFIG_SYS_SCSI_MAX_LUN)
-#define CONFIG_NET_MULTI
-
-#define CONFIG_CMD_MEMINFO
-#define CONFIG_SYS_MEMTEST_START       0x80000000
-#define CONFIG_SYS_MEMTEST_END         0x9fffffff
-
 #undef CONFIG_EXTRA_ENV_SETTINGS
 #define CONFIG_EXTRA_ENV_SETTINGS              \
        "verify=no\0"                           \
-       "fdt_high=0xffffffffffffffff\0"         \
        "initrd_high=0xffffffffffffffff\0"      \
        "fdt_addr=0x00f00000\0"                 \
        "kernel_addr=0x01000000\0"              \
@@ -58,6 +32,7 @@
        "load_addr=0xa0000000\0"                \
        "kernel_size=0x2800000\0"               \
        "kernelheader_size=0x40000\0"           \
+       "bootm_size=0x10000000\0"               \
        "console=ttyS0,115200\0"                \
        BOOTENV                                 \
        "boot_scripts=ls1012ardb_boot.scr\0"    \
@@ -72,13 +47,6 @@
                      "run scan_dev_for_boot; " \
                  "fi; "                        \
              "done\0"                          \
-       "scan_dev_for_boot="                              \
-               "echo Scanning ${devtype} "               \
-                               "${devnum}:${distro_bootpart}...; "  \
-               "for prefix in ${boot_prefixes}; do "     \
-                       "run scan_dev_for_scripts; "      \
-               "done;"                                   \
-               "\0"                                      \
        "boot_a_script="                                  \
                "load ${devtype} ${devnum}:${distro_bootpart} "  \
                        "${scriptaddr} ${prefix}${script}; "    \
@@ -97,10 +65,10 @@
                "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
                "bootm $load_addr#$board\0"
 
-#undef CONFIG_BOOTCOMMAND
-#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
-#define CONFIG_BOOTCOMMAND "pfe stop;run distro_bootcmd; run qspi_bootcmd; " \
-                          "env exists secureboot && esbc_halt;"
+#ifdef CONFIG_TFABOOT
+#undef QSPI_NOR_BOOTCOMMAND
+#define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \
+                            "env exists secureboot && esbc_halt;"
 #endif
 
 #define DEFAULT_PFE_MDIO_NAME "PFE_MDIO"