Convert CONFIG_BOOTFILE to Kconfig

[platform/kernel/u-boot.git] / include / configs / legoev3.h

diff --git a/include/configs/legoev3.h b/include/configs/legoev3.h
index a5f7fab..83bd6bc 100644 (file)
--- a/include/configs/legoev3.h
+++ b/include/configs/legoev3.h
@@ -18,16 +18,13 @@
  * SoC Configuration
  */
 #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH
-#define CONFIG_SYS_CLK_FREQ            clk_get(DAVINCI_ARM_CLKID)
 #define CONFIG_SYS_OSCIN_FREQ          24000000
 #define CONFIG_SYS_TIMERBASE           DAVINCI_TIMER0_BASE
 #define CONFIG_SYS_HZ_CLOCK            clk_get(DAVINCI_AUXCLK_CLKID)
-#define CONFIG_SKIP_LOWLEVEL_INIT
 
 /*
  * Memory Info
  */
-#define CONFIG_SYS_MALLOC_LEN  (0x10000 + 1*1024*1024) /* malloc() len */
 #define PHYS_SDRAM_1           DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */
 #define PHYS_SDRAM_1_SIZE      (64 << 20) /* SDRAM size 64MB */
 #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
@@ -47,54 +44,21 @@
 /*
  * I2C Configuration
  */
-#define CONFIG_SYS_I2C
 #define CONFIG_SYS_DAVINCI_I2C_SPEED           400000
 #define CONFIG_SYS_DAVINCI_I2C_SLAVE   10 /* Bogus, master-only in U-Boot */
 
 /*
  * U-Boot general configuration
  */
-#define CONFIG_BOOTFILE                "uImage" /* Boot file name */
 #define CONFIG_SYS_CBSIZE      1024 /* Console I/O Buffer Size */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
-#define CONFIG_SYS_LOAD_ADDR   (PHYS_SDRAM_1 + 0x700000)
 
 /*
  * Linux Information
  */
 #define LINUX_BOOT_PARAM_ADDR  (PHYS_SDRAM_1 + 0x100)
 #define CONFIG_HWCONFIG                /* enable hwconfig */
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_REVISION_TAG
-#define CONFIG_SERIAL_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_SETUP_INITRD_TAG
-#define CONFIG_BOOTCOMMAND \
-       "if mmc rescan; then " \
-               "if run loadbootscr; then " \
-                       "run bootscript; " \
-               "else " \
-                       "if run loadbootenv; then " \
-                               "echo Loaded env from ${bootenvfile};" \
-                               "run importbootenv;" \
-                       "fi;" \
-                       "if test -n $uenvcmd; then " \
-                               "echo Running uenvcmd...;" \
-                               "run uenvcmd;" \
-                       "fi;" \
-                       "if run loadimage; then " \
-                               "run mmcargs; " \
-                               "if run loadfdt; then " \
-                                       "echo Using ${fdtfile}...;" \
-                                       "run fdtfixup; " \
-                                       "run fdtboot; "\
-                               "fi; " \
-                               "run mmcboot; " \
-                       "fi; " \
-               "fi; " \
-       "fi; "\
-       "run flashargs; " \
-       "run flashboot"
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "bootenvfile=uEnv.txt\0" \
        "fdtfile=da850-lego-ev3.dtb\0" \