+/* SPDX-License-Identifier: GPL-2.0 */
/*
* include/configs/lager.h
* This file is lager board configuration.
*
* Copyright (C) 2013, 2014 Renesas Electronics Corporation
- *
- * SPDX-License-Identifier: GPL-2.0
*/
#ifndef __LAGER_H
#define __LAGER_H
-#undef DEBUG
-#define CONFIG_R8A7790
-#define CONFIG_ARCH_RMOBILE_BOARD_STRING "Lager"
-
#include "rcar-gen2-common.h"
-#if defined(CONFIG_ARCH_RMOBILE_EXTRAM_BOOT)
-#define CONFIG_SYS_TEXT_BASE 0xB0000000
-#else
-#define CONFIG_SYS_TEXT_BASE 0xE8080000
-#endif
-
-/* STACK */
-#if defined(CONFIGF_RMOBILE_EXTRAM_BOOT)
-#define CONFIG_SYS_INIT_SP_ADDR 0xB003FFFC
-#else
-#define CONFIG_SYS_INIT_SP_ADDR 0xE827FFFC
-#endif
-#define STACK_AREA_SIZE 0xC000
-#define LOW_LEVEL_MERAM_STACK \
+#define CONFIG_SYS_INIT_SP_ADDR 0x4f000000
+#define STACK_AREA_SIZE 0x00100000
+#define LOW_LEVEL_MERAM_STACK \
(CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4)
/* MEMORY */
#define RCAR_GEN2_SDRAM_SIZE (2048u * 1024 * 1024)
#define RCAR_GEN2_UBOOT_SDRAM_SIZE (512 * 1024 * 1024)
-/* SCIF */
-#define CONFIG_SCIF_CONSOLE
-
-/* SPI */
-#define CONFIG_SPI
-#define CONFIG_SH_QSPI
-#define CONFIG_SYS_NO_FLASH
-
/* SH Ether */
-#define CONFIG_SH_ETHER
#define CONFIG_SH_ETHER_USE_PORT 0
#define CONFIG_SH_ETHER_PHY_ADDR 0x1
#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII
-#define CONFIG_SH_ETHER_ALIGNE_SIZE 64
#define CONFIG_SH_ETHER_CACHE_WRITEBACK
#define CONFIG_SH_ETHER_CACHE_INVALIDATE
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_MICREL
+#define CONFIG_SH_ETHER_ALIGNE_SIZE 64
#define CONFIG_BITBANGMII
#define CONFIG_BITBANGMII_MULTI
-/* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_RCAR
-#define CONFIG_SYS_RCAR_I2C0_SPEED 400000
-#define CONFIG_SYS_RCAR_I2C1_SPEED 400000
-#define CONFIG_SYS_RCAR_I2C2_SPEED 400000
-#define CONFIG_SYS_RCAR_I2C3_SPEED 400000
-#define CONFIF_SYS_RCAR_I2C_NUM_CONTROLLERS 4
-
-#define CONFIG_SYS_I2C_POWERIC_ADDR 0x58 /* da9063 */
-
/* Board Clock */
#define RMOBILE_XTAL_CLK 20000000u
#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK
-#define CONFIG_SH_TMU_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2) /* EXT / 2 */
-#define CONFIG_PLL1_CLK_FREQ (CONFIG_SYS_CLK_FREQ * 156 / 2)
-#define CONFIG_PLL1_DIV2_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 2)
-#define CONFIG_MP_CLK_FREQ (CONFIG_PLL1_DIV2_CLK_FREQ / 15)
-#define CONFIG_HP_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 12)
+#define CONFIG_SH_TMU_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2)
#define CONFIG_SYS_TMU_CLK_DIV 4
-/* USB */
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_RMOBILE
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
-
-/* MMC */
-#define CONFIG_GENERIC_MMC
-
-#define CONFIG_SH_MMCIF
-#define CONFIG_SH_MMCIF_ADDR 0xEE220000
-#define CONFIG_SH_MMCIF_CLK 97500000
-
-/* Module stop status bits */
-/* INTC-RT */
-#define CONFIG_SMSTP0_ENA 0x00400000
-/* MSIF */
-#define CONFIG_SMSTP2_ENA 0x00002000
-/* INTC-SYS, IRQC */
-#define CONFIG_SMSTP4_ENA 0x00000180
-/* SCIF0 */
-#define CONFIG_SMSTP7_ENA 0x00200000
-
-/* SDHI */
-#define CONFIG_SH_SDHI_FREQ 97500000
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "fdt_high=0xffffffff\0" \
+ "initrd_high=0xffffffff\0"
+
+/* SPL support */
+#define CONFIG_SPL_TEXT_BASE 0xe6300000
+#define CONFIG_SPL_STACK 0xe6340000
+#define CONFIG_SPL_MAX_SIZE 0x4000
+#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x140000
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_CONS_SCIF0
+#define CONFIG_SH_SCIF_CLK_FREQ 65000000
+#endif
#endif /* __LAGER_H */