keystone2: change default boot mode to ubi

[platform/kernel/u-boot.git] / include / configs / ks2_evm.h

diff --git a/include/configs/ks2_evm.h b/include/configs/ks2_evm.h
index 6e6755a..0446e34 100644 (file)
--- a/include/configs/ks2_evm.h
+++ b/include/configs/ks2_evm.h
@@ -23,7 +23,6 @@
 #define CONFIG_ARMV7
 #define CONFIG_ARCH_CPU_INIT
 #define CONFIG_SYS_ARCH_TIMER
-#define CONFIG_SYS_HZ                  1000
 #define CONFIG_SYS_TEXT_BASE           0x0c001000
 #define CONFIG_SPL_TARGET              "u-boot-spi.gph"
 #define CONFIG_SYS_DCACHE_OFF
@@ -92,6 +91,8 @@
 #define CONFIG_SYS_SPI2_NUM_CS         4
 
 /* Network Configuration */
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_MARVELL
 #define CONFIG_MII
 #define CONFIG_BOOTP_DEFAULT
 #define CONFIG_BOOTP_DNS
@@ -99,12 +100,12 @@
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_NET_RETRY_COUNT         32
 #define CONFIG_NET_MULTI
-#define CONFIG_GET_LINK_STATUS_ATTEMPTS        5
 #define CONFIG_SYS_SGMII_REFCLK_MHZ    312
 #define CONFIG_SYS_SGMII_LINERATE_MHZ  1250
 #define CONFIG_SYS_SGMII_RATESCALE     2
 
 /* Keyston Navigator Configuration */
+#define CONFIG_TI_KSNAV
 #define CONFIG_KSNAV_QM_BASE_ADDRESS           KS2_QM_BASE_ADDRESS
 #define CONFIG_KSNAV_QM_CONF_BASE              KS2_QM_CONF_BASE
 #define CONFIG_KSNAV_QM_DESC_SETUP_BASE                KS2_QM_DESC_SETUP_BASE
@@ -121,6 +122,7 @@
 #define CONFIG_KSNAV_QM_QPOOL_NUM              KS2_QM_QPOOL_NUM
 
 /* NETCP pktdma */
+#define CONFIG_KSNAV_PKTDMA_NETCP
 #define CONFIG_KSNAV_NETCP_PDMA_CTRL_BASE      KS2_NETCP_PDMA_CTRL_BASE
 #define CONFIG_KSNAV_NETCP_PDMA_TX_BASE                KS2_NETCP_PDMA_TX_BASE
 #define CONFIG_KSNAV_NETCP_PDMA_TX_CH_NUM      KS2_NETCP_PDMA_TX_CH_NUM
@@ -133,6 +135,17 @@
 #define CONFIG_KSNAV_NETCP_PDMA_RX_RCV_QUEUE   KS2_NETCP_PDMA_RX_RCV_QUEUE
 #define CONFIG_KSNAV_NETCP_PDMA_TX_SND_QUEUE   KS2_NETCP_PDMA_TX_SND_QUEUE
 
+/* Keystone net */
+#define CONFIG_DRIVER_TI_KEYSTONE_NET
+#define CONFIG_KSNET_MAC_ID_BASE               KS2_MAC_ID_BASE_ADDR
+#define CONFIG_KSNET_NETCP_BASE                        KS2_NETCP_BASE
+#define CONFIG_KSNET_SERDES_SGMII_BASE         KS2_SGMII_SERDES_BASE
+#define CONFIG_KSNET_SERDES_SGMII2_BASE                KS2_SGMII_SERDES2_BASE
+#define CONFIG_KSNET_SERDES_LANES_PER_SGMII    KS2_LANES_PER_SGMII_SERDES
+
+/* SerDes */
+#define CONFIG_TI_KEYSTONE_SERDES
+
 /* AEMIF */
 #define CONFIG_TI_AEMIF
 #define CONFIG_AEMIF_CNTRL_BASE                KS2_AEMIF_CNTRL_BASE
@@ -232,7 +245,7 @@
 #define CONFIG_BOOTDELAY               3
 #define CONFIG_BOOTFILE                        "uImage"
 #define CONFIG_EXTRA_ENV_SETTINGS                                      \
-       "boot=ramfs\0"                                                  \
+       "boot=ubi\0"                                                    \
        "tftp_root=/\0"                                                 \
        "nfs_root=/export\0"                                            \
        "mem_lpae=1\0"                                                  \
@@ -255,7 +268,7 @@
        "run_kern=bootm ${addr_kern} - ${addr_fdt}\0"                   \
        "init_net=run args_all args_net\0"                              \
        "init_ubi=run args_all args_ubi; "                              \
-               "ubi part ubifs; ubifsmount boot;"                      \
+               "ubi part ubifs; ubifsmount ubi:boot;"                  \
                "ubifsload ${addr_secdb_key} securedb.key.bin;\0"       \
        "get_fdt_net=dhcp ${addr_fdt} ${tftp_root}/${name_fdt}\0"       \
        "get_fdt_ubi=ubifsload ${addr_fdt} ${name_fdt}\0"               \
@@ -311,8 +324,4 @@
 #include <asm/arch/clock.h>
 #define CONFIG_SYS_HZ_CLOCK            clk_get_rate(KS2_CLK1_6)
 
-/* Maximum memory size for relocated U-boot at the end of the DDR3 memory
-   which is NOT applicable for DDR ECC test */
-#define CONFIG_MAX_UBOOT_MEM_SIZE      (4 << 20)       /* 4 MiB */
-
 #endif /* __CONFIG_KS2_EVM_H */