#include "imx6_spl.h" /* common IMX6 SPL configuration */
/* Miscellaneous configurable options */
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_REVISION_TAG
-
-#define CONFIG_BOUNCE_BUFFER
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (4 * SZ_1M)
/* FEC ethernet */
-#define CONFIG_MII
-#define IMX_FEC_BASE ENET_BASE_ADDR
-#define CONFIG_FEC_XCV_TYPE RGMII
-#define CONFIG_ETHPRIME "FEC"
-#define CONFIG_FEC_MXC_PHYADDR 0
#define CONFIG_ARP_TIMEOUT 200UL
-/* Fuses */
-#ifdef CONFIG_CMD_FUSE
-#define CONFIG_MXC_OCOTP
-#endif
-
-/* I2C Configs */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_SPEED 100000
-
-/* MMC Configs */
-#define CONFIG_FSL_ESDHC
-#define CONFIG_FSL_USDHC
-#define CONFIG_SYS_FSL_ESDHC_ADDR 0
-#define CONFIG_SYS_FSL_USDHC_NUM 2
-#define CONFIG_SYS_MMC_ENV_DEV 1 /* 0 = SDHC2, 1 = SDHC4 (eMMC) */
-
-/* UART */
-#define CONFIG_MXC_UART
-#define CONFIG_MXC_UART_BASE UART1_BASE
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
-
/* USB Configs */
#ifdef CONFIG_CMD_USB
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_ASIX
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 /* Enabled USB controller number */
#endif
-/* Watchdog */
-#define CONFIG_HW_WATCHDOG
-#define CONFIG_IMX_WATCHDOG
-#define CONFIG_WATCHDOG_TIMEOUT_MSECS 60000
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_LOADADDR 0x12000000
-#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-
#ifndef CONFIG_SPL_BUILD
#define CONFIG_EXTRA_ENV_SETTINGS \
"console=ttymxc0,115200\0" \
"rdinit=/sbin/init\0" \
"addinitrd=setenv bootargs ${bootargs} rdinit=${rdinit} ${debug} \0" \
"fit_config=mx6q_tpc70_conf\0" \
+ "uboot_file=u-boot.img\0" \
+ "SPL_file=SPL\0" \
+ "wic_file=kp-image-kpimx6qtpc.wic\0" \
"upd_image=st.4k\0" \
- "updargs=setenv bootargs console=${console} ${smp}"\
- "rdinit=${rdinit} ${debug} ${displayargs}\0" \
+ "updargs=setenv bootargs console=${console} ${smp} ${displayargs}\0" \
+ "initrd_ram_dev=/dev/ram\0" \
+ "addswupdate=setenv bootargs ${bootargs} root=${initrd_ram_dev} rw\0" \
"loadusb=usb start; " \
"fatload usb 0 ${loadaddr} ${upd_image}\0" \
+ "upd_uboot_sd=" \
+ "if tftp ${loadaddr} ${uboot_file}; then " \
+ "setexpr blkc ${filesize} / 0x200;" \
+ "setexpr blkc ${blkc} + 1;" \
+ "mmc write ${loadaddr} 0x8A ${blkc};" \
+ "fi;\0" \
+ "upd_SPL_sd=" \
+ "if tftp ${loadaddr} ${SPL_file}; then " \
+ "setexpr blkc ${filesize} / 0x200;" \
+ "setexpr blkc ${blkc} + 1;" \
+ "mmc write ${loadaddr} 0x2 ${blkc};" \
+ "fi;\0" \
+ "upd_SPL_mmc=mmc dev 1; mmc partconf 1 0 1 1; run upd_SPL_sd\0" \
+ "upd_uboot_mmc=mmc dev 1; mmc partconf 1 0 1 1; run upd_uboot_sd\0" \
+ "up_mmc=run upd_SPL_mmc; run upd_uboot_mmc\0" \
+ "up_sd=run upd_SPL_sd; run upd_uboot_sd\0" \
+ "upd_wic=" \
+ "if tftp ${loadaddr} ${wic_file}; then " \
+ "setexpr blkc ${filesize} / 0x200;" \
+ "setexpr blkc ${blkc} + 1;" \
+ "mmc write ${loadaddr} 0x0 ${blkc};" \
+ "fi;\0" \
"usbupd=echo Booting update from usb ...; " \
"setenv bootargs; " \
"run updargs; " \
+ "run addinitrd; " \
+ "run addswupdate; " \
"run loadusb; " \
"bootm ${loadaddr}#${fit_config}\0" \
BOOTENV
-#define CONFIG_BOOTCOMMAND "run usbupd; run distro_bootcmd"
-
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0) \
func(MMC, mmc, 1) \
#endif
/* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
/* Environment */
-#define CONFIG_ENV_SIZE (SZ_8K)
-#define CONFIG_ENV_OFFSET 0x100000
-#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
-#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
#endif /* __KP_IMX6Q_TPC_IMX6_CONFIG_H_ */