Merge tag 'next-20220328' of https://source.denx.de/u-boot/custodians/u-boot-video...

[platform/kernel/u-boot.git] / include / configs / kontron_sl28.h

diff --git a/include/configs/kontron_sl28.h b/include/configs/kontron_sl28.h
index 442fb58..77ea132 100644 (file)
--- a/include/configs/kontron_sl28.h
+++ b/include/configs/kontron_sl28.h
@@ -16,12 +16,9 @@
 #endif
 
 /* DDR */
-#define CONFIG_DDR_ECC
-#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 #define CONFIG_MEM_INIT_VALUE          0xdeadbeef
 
 #define CONFIG_VERY_BIG_RAM
-#define CONFIG_CHIP_SELECTS_PER_CTRL   4
 #define CONFIG_DIMM_SLOTS_PER_CTLR     1
 #define CONFIG_SYS_DDR_SDRAM_BASE      0x80000000
 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY      0
@@ -32,39 +29,19 @@
 /* early stack pointer */
 #define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_FSL_OCRAM_BASE + 0xeff0)
 
-/* memtest command */
-#define CONFIG_SYS_MEMTEST_START        0x80000000
-#define CONFIG_SYS_MEMTEST_END          0x9fffffff
-
 /* SMP */
 #define CPU_RELEASE_ADDR               secondary_boot_addr
 
 /* generic timer */
 #define COUNTER_FREQUENCY              25000000
 
-/* size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 2048 * 1024)
-
 /* early heap for SPL DM */
 #define CONFIG_MALLOC_F_ADDR           CONFIG_SYS_FSL_OCRAM_BASE
 
 /* serial port */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE 1
 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0) / 2)
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
-
-#define CONFIG_SYS_CLK_FREQ            100000000
-#define CONFIG_DDR_CLK_FREQ            100000000
-#define COUNTER_FREQUENCY_REAL         (CONFIG_SYS_CLK_FREQ / 4)
-
-/* MMC */
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#endif
 
-/* ethernet */
-#define CONFIG_SYS_RX_ETH_BUFFER       8
+#define COUNTER_FREQUENCY_REAL         (get_board_sys_clk() / 4)
 
 /* SPL */
 #define CONFIG_SPL_BSS_START_ADDR      0x80100000
@@ -78,7 +55,6 @@
 
 /* environment */
 /* see include/configs/ti_armv7_common.h */
-#define CONFIG_SYS_LOAD_ADDR           0x82000000
 #define ENV_MEM_LAYOUT_SETTINGS \
        "loadaddr=0x82000000\0" \
        "kernel_addr_r=0x82000000\0" \
@@ -93,6 +69,7 @@
        func(MMC, mmc, 1) \
        func(NVME, nvme, 0) \
        func(USB, usb, 0) \
+       func(SCSI, scsi, 0) \
        func(DHCP, dhcp, 0) \
        func(PXE, pxe, 0)
 #include <config_distro_bootcmd.h>
@@ -102,6 +79,8 @@
        "envload=env import -d -b ${env_addr}\0" \
        "install_rcw=source 20200000\0" \
        "fdtfile=freescale/fsl-ls1028a-kontron-sl28.dtb\0" \
+       "dfu_alt_info=sf 0:0=u-boot-bin raw 0x210000 0x1d0000;" \
+                           "u-boot-env raw 0x3e0000 0x20000\0" \
        ENV_MEM_LAYOUT_SETTINGS \
        BOOTENV