/* SPDX-License-Identifier: GPL-2.0+ */
-#ifndef __SL28_H
-#define __SL28_H
+#ifndef __SL28_CONFIG_H
+#define __SL28_CONFIG_H
#include <asm/arch/stream_id_lsch3.h>
#include <asm/arch/config.h>
#endif
/* DDR */
-#define CONFIG_DDR_ECC
-#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
#define CONFIG_MEM_INIT_VALUE 0xdeadbeef
#define CONFIG_VERY_BIG_RAM
-#define CONFIG_CHIP_SELECTS_PER_CTRL 4
-#define CONFIG_DIMM_SLOTS_PER_CTLR 1
#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000
#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
#define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS 1
/* early stack pointer */
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xeff0)
-
-/* memtest command */
-#define CONFIG_SYS_MEMTEST_START 0x80000000
-#define CONFIG_SYS_MEMTEST_END 0x9fffffff
/* SMP */
#define CPU_RELEASE_ADDR secondary_boot_addr
/* generic timer */
-#define COUNTER_FREQUENCY 25000000
-
-/* size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2048 * 1024)
/* early heap for SPL DM */
#define CONFIG_MALLOC_F_ADDR CONFIG_SYS_FSL_OCRAM_BASE
/* serial port */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE 1
#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0) / 2)
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-#define CONFIG_SYS_CLK_FREQ 100000000
-#define CONFIG_DDR_CLK_FREQ 100000000
-#define COUNTER_FREQUENCY_REAL (CONFIG_SYS_CLK_FREQ / 4)
-
-/* MMC */
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#endif
-/* ethernet */
-#define CONFIG_SYS_RX_ETH_BUFFER 8
+#define COUNTER_FREQUENCY_REAL (get_board_sys_clk() / 4)
/* SPL */
-#define CONFIG_SPL_BSS_START_ADDR 0x80100000
-#define CONFIG_SPL_BSS_MAX_SIZE 0x00100000
-#define CONFIG_SPL_MAX_SIZE 0x20000
-#define CONFIG_SPL_STACK (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0)
-#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000
-#define CONFIG_SYS_SPL_MALLOC_START 0x80200000
#define CONFIG_SYS_MONITOR_LEN (1024 * 1024)
+/* GUID for capsule updatable firmware image */
+#define KONTRON_SL28_FIT_IMAGE_GUID \
+ EFI_GUID(0x86ebd44f, 0xfeb8, 0x466f, 0x8b, 0xb8, \
+ 0x89, 0x06, 0x18, 0x45, 0x6d, 0x8b)
+
/* environment */
/* see include/configs/ti_armv7_common.h */
-#define CONFIG_SYS_LOAD_ADDR 0x82000000
#define ENV_MEM_LAYOUT_SETTINGS \
"loadaddr=0x82000000\0" \
"kernel_addr_r=0x82000000\0" \
"ramdisk_addr_r=0x88080000\0"
#define BOOT_TARGET_DEVICES(func) \
- func(MMC, mmc, 1) \
func(MMC, mmc, 0) \
+ func(MMC, mmc, 1) \
func(NVME, nvme, 0) \
func(USB, usb, 0) \
+ func(SCSI, scsi, 0) \
func(DHCP, dhcp, 0) \
func(PXE, pxe, 0)
#include <config_distro_bootcmd.h>
"envload=env import -d -b ${env_addr}\0" \
"install_rcw=source 20200000\0" \
"fdtfile=freescale/fsl-ls1028a-kontron-sl28.dtb\0" \
+ "dfu_alt_info=sf 0:0=u-boot-bin raw 0x210000 0x1d0000;" \
+ "u-boot-env raw 0x3e0000 0x20000\0" \
ENV_MEM_LAYOUT_SETTINGS \
BOOTENV
-#endif /* __SL28_H */
+#endif /* __SL28_CONFIG_H */