Makefile: move all Power Architecture boards into boards.cfg

[platform/kernel/u-boot.git] / include / configs / kmeter1.h

diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h
index 71658d8..9117842 100644 (file)
--- a/include/configs/kmeter1.h
+++ b/include/configs/kmeter1.h
@@ -30,9 +30,13 @@
 #define CONFIG_KMETER1         1 /* KMETER1 board specific */
 #define CONFIG_HOSTNAME                kmeter1
 
+#define        CONFIG_SYS_TEXT_BASE    0xF0000000
+
 /* include common defines/options for all Keymile boards */
 #include "keymile-common.h"
 
+#define CONFIG_KM_UBI_PARTITION_NAME   "ubi0"
+
 #define MTDIDS_DEFAULT         "nor0=boot"
 #define MTDPARTS_DEFAULT       \
        "mtdparts=boot:768k(u-boot),128k(env),128k(envred),"    \
@@ -155,7 +159,7 @@
 /*
  * The reserved memory
  */
-#define CONFIG_SYS_MONITOR_BASE        TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE /* start of monitor */
 #define CONFIG_SYS_FLASH_BASE          0xF0000000
 #define CONFIG_SYS_PIGGY_BASE          0xE8000000
 #define        CONFIG_SYS_PIGGY_SIZE           128
@@ -255,7 +259,6 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX      1
-#undef CONFIG_SERIAL_SOFTWARE_FIFO
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
@@ -282,7 +285,7 @@
  * QE UEC ethernet configuration
  */
 #define CONFIG_UEC_ETH
-#define CONFIG_ETHPRIME                "FSL UEC0"
+#define CONFIG_ETHPRIME                "UEC0"
 
 #define CONFIG_UEC_ETH1                /* GETH1 */
 #define UEC_VERBOSE_DEBUG      1
@@ -293,7 +296,8 @@
 #define CONFIG_SYS_UEC1_TX_CLK         QE_CLK17
 #define CONFIG_SYS_UEC1_ETH_TYPE       FAST_ETH
 #define CONFIG_SYS_UEC1_PHY_ADDR       0
-#define CONFIG_SYS_UEC1_INTERFACE_MODE ENET_100_RMII
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE RMII
+#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
 #endif
 
 /*
@@ -355,16 +359,17 @@
 
 /*
  * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
+ * have to be in the first 256 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ           (8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ           (256 << 20) /* Initial Memory map for Linux */
 
 /*
  * Core HID Setup
  */
 #define CONFIG_SYS_HID0_INIT           0x000000000
-#define CONFIG_SYS_HID0_FINAL          HID0_ENABLE_MACHINE_CHECK
+#define CONFIG_SYS_HID0_FINAL          (HID0_ENABLE_MACHINE_CHECK | \
+                                        HID0_ENABLE_INSTRUCTION_CACHE)
 #define CONFIG_SYS_HID2                        HID2_HBE
 
 /*
@@ -449,11 +454,6 @@
 
 #define CONFIG_PRAM    512     /* protected RAM [KBytes] */
 
-#define MTDIDS_DEFAULT         "nor2=app"
-#define MTDPARTS_DEFAULT \
-       "mtdparts=app:256k(u-boot),128k(env),128k(envred),"     \
-       "1536k(esw0),8704k(rootfs0),1536k(esw1),2432k(rootfs1),640k(var),768k(cfg)"
-
 /*
  * Environment Configuration
  */