Merge git://www.denx.de/git/u-boot-sunxi

[platform/kernel/u-boot.git] / include / configs / km82xx.h

diff --git a/include/configs/km82xx.h b/include/configs/km82xx.h
index 3c2117f..029c348 100644 (file)
--- a/include/configs/km82xx.h
+++ b/include/configs/km82xx.h
@@ -2,23 +2,7 @@
  * (C) Copyright 2007-2011
  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -212,7 +196,6 @@
 #define        CONFIG_EXTRA_ENV_SETTINGS                                       \
        CONFIG_KM_BOARD_EXTRA_ENV                                       \
        CONFIG_KM_DEF_ENV                                               \
-       "EEprom_ivm=pca9544a:70:4 \0"                                   \
        "unlock=yes\0"                                                  \
        "newenv="                                                       \
                "prot off 0xFE0C0000 +0x40000 && "                      \
@@ -242,10 +225,20 @@
 #endif /* CONFIG_ENV_IS_IN_FLASH */
 
 /* enable I2C and select the hardware/software driver */
-#undef CONFIG_HARD_I2C                 /* I2C with hardware support    */
-#define        CONFIG_SOFT_I2C                 /* I2C bit-banged               */
-#define CONFIG_SYS_I2C_SPEED           50000   /* I2C speed */
-#define CONFIG_SYS_I2C_SLAVE           0x7F    /* I2C slave address */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT            /* I2C bit-banged */
+#define CONFIG_SYS_I2C_INIT_BOARD
+#define CONFIG_SYS_NUM_I2C_BUSES       3
+#define CONFIG_SYS_I2C_MAX_HOPS                1
+#define CONFIG_SYS_I2C_SOFT_SPEED      50000
+#define CONFIG_SYS_I2C_SPEED           CONFIG_SYS_I2C_SOFT_SPEED
+#define CONFIG_SYS_I2C_SOFT_SLAVE      0x7F
+#define CONFIG_SYS_I2C_BUSES   {{0, {I2C_NULL_HOP} }, \
+                       {0, {{I2C_MUX_PCA9542, 0x70, 0} } }, \
+                       {0, {{I2C_MUX_PCA9542, 0x70, 1} } } }
+
+#define CONFIG_KM_IVM_BUS              1       /* I2C2 (Mux-Port 1)*/
+#define CONFIG_KM_I2C_ABORT
 
 /*
  * Software (bit-bang) I2C driver configuration
@@ -280,9 +273,8 @@ int get_scl(void);
 #define CONFIG_DTT_LM75                        /* ON Semi's LM75               */
 #define CONFIG_DTT_SENSORS     {0}     /* Sensor addresses             */
 #define CONFIG_SYS_DTT_MAX_TEMP        70
-#define CONFIG_SYS_DTT_LOW_TEMP        -30
 #define CONFIG_SYS_DTT_HYSTERESIS      3
-#define CONFIG_SYS_DTT_BUS_NUM         (CONFIG_SYS_MAX_I2C_BUS)
+#define CONFIG_SYS_DTT_BUS_NUM         2
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1