cmd: Kconfig: Move CONFIG_MP to Kconfig

[platform/kernel/u-boot.git] / include / configs / km / kmp204x-common.h

diff --git a/include/configs/km/kmp204x-common.h b/include/configs/km/kmp204x-common.h
index 5bdda22..73506c4 100644 (file)
--- a/include/configs/km/kmp204x-common.h
+++ b/include/configs/km/kmp204x-common.h
@@ -1,18 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2013 Keymile AG
  * Valentin Longchamp <valentin.longchamp@keymile.com>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef _CONFIG_KMP204X_H
 #define _CONFIG_KMP204X_H
 
-#define CONFIG_PHYS_64BIT
-#define CONFIG_PPC_P2041
-
-#define CONFIG_SYS_TEXT_BASE   0xfff40000
-
 #define CONFIG_KM_DEF_NETDEV   "netdev=eth0\0"
 
 /* an additionnal option is required for UBI as subpage access is
@@ -21,8 +15,6 @@
 
 #define CONFIG_NAND_ECC_BCH
 
-#define CONFIG_DISPLAY_BOARDINFO
-
 /* common KM defines */
 #include "keymile-common.h"
 
@@ -34,17 +26,11 @@
 #define CONFIG_SYS_FSL_PBL_RCW board/keymile/kmp204x/rcw_kmp204x.cfg
 
 /* High Level Configuration Options */
-#define CONFIG_BOOKE
-#define CONFIG_E500                    /* BOOKE e500 family */
-#define CONFIG_E500MC                  /* BOOKE e500mc family */
 #define CONFIG_SYS_BOOK3E_HV           /* Category E.HV supported */
 #define CONFIG_FSL_CORENET             /* Freescale CoreNet platform */
-#define CONFIG_MP                      /* support multiple processors */
 
 #define CONFIG_SYS_FSL_CPC             /* Corenet Platform Cache */
-#define CONFIG_SYS_NUM_CPC             CONFIG_NUM_DDR_CONTROLLERS
-#define CONFIG_FSL_ELBC                        /* Has Enhanced localbus controller */
-#define CONFIG_PCI                     /* Enable PCI/PCIE */
+#define CONFIG_SYS_NUM_CPC             CONFIG_SYS_NUM_DDR_CTLRS
 #define CONFIG_PCIE1                   /* PCIE controller 1 */
 #define CONFIG_PCIE3                   /* PCIE controller 3 */
 #define CONFIG_FSL_PCI_INIT            /* Use common FSL init code */
@@ -52,11 +38,8 @@
 
 #define CONFIG_SYS_DPAA_RMAN           /* RMan */
 
-#define CONFIG_FSL_LAW                 /* Use common FSL init code */
-
 /* Environment in SPI Flash */
 #define CONFIG_SYS_EXTRA_ENV_RELOC
-#define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_SPI_BUS              0
 #define CONFIG_ENV_SPI_CS               0
 #define CONFIG_ENV_SPI_MAX_HZ           20000000
@@ -112,7 +95,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_CHIP_SELECTS_PER_CTRL   (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 
 #define CONFIG_DDR_SPD
-#define CONFIG_SYS_FSL_DDR3
 #define CONFIG_FSL_DDR_INTERACTIVE
 
 #define CONFIG_SYS_SPD_BUS_NUM 0
@@ -166,11 +148,8 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 
 #define CONFIG_SYS_NAND_BASE_LIST     {CONFIG_SYS_NAND_BASE}
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_CMD_NAND
 #define CONFIG_SYS_NAND_BLOCK_SIZE    (128 * 1024)
 
-#define CONFIG_BCH
-
 /* NAND flash config */
 #define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
                               | BR_PS_8               /* Port Size = 8 bit */ \
@@ -207,15 +186,8 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_BR1_PRELIM  CONFIG_SYS_QRIO_BR_PRELIM /* QRIO Base Address */
 #define CONFIG_SYS_OR1_PRELIM  CONFIG_SYS_QRIO_OR_PRELIM /* QRIO Options */
 
-/* bootcounter in QRIO */
-#define CONFIG_BOOTCOUNT_LIMIT
-#define CONFIG_SYS_BOOTCOUNT_ADDR      (CONFIG_SYS_QRIO_BASE + 0x20)
-
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_EARLY_INIT_R      /* call board_early_init_r function */
 #define CONFIG_MISC_INIT_F
 #define CONFIG_MISC_INIT_R
-#define CONFIG_LAST_STAGE_INIT
 
 #define CONFIG_HWCONFIG
 
@@ -243,7 +215,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
  * open - index 2
  * shorted - index 1
  */
-#define CONFIG_CONS_INDEX      1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         (get_bus_freq(0)/2)
@@ -314,7 +285,6 @@ int get_scl(void);
 #define CONFIG_SYS_PCIE3_IO_SIZE       0x00010000      /* 64k */
 
 /* Qman/Bman */
-#define CONFIG_SYS_DPAA_QBMAN          /* Support Q/Bman */
 #define CONFIG_SYS_BMAN_NUM_PORTALS    10
 #define CONFIG_SYS_BMAN_MEM_BASE       0xf4000000
 #define CONFIG_SYS_BMAN_MEM_PHYS       0xff4000000ull
@@ -353,20 +323,15 @@ int get_scl(void);
 
 #define CONFIG_FMAN_ENET
 #define CONFIG_PHYLIB_10G
-#define CONFIG_PHY_MARVELL             /* there is a marvell phy */
 
 #define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_PCI_PNP                 /* do pci plug-and-play */
 
 #define CONFIG_PCI_SCAN_SHOW           /* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
 
 /* RGMII (FM1@DTESC5) is used as debug itf, it's the only one configured */
 #define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR 0x11
 #define CONFIG_SYS_TBIPA_VALUE 8
-#define CONFIG_PHYLIB          /* recommended PHY management */
 #define CONFIG_ETHPRIME                "FM1@DTSEC5"
-#define CONFIG_PHY_GIGE                /* Include GbE speed/duplex detection */
 
 /*
  * Environment
@@ -385,11 +350,8 @@ int get_scl(void);
 /*
  * additionnal command line configuration.
  */
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_ERRATA
 
 /* we don't need flash support */
-#define CONFIG_SYS_NO_FLASH
 #undef CONFIG_FLASH_CFI_MTD
 #undef CONFIG_JFFS2_CMDLINE
 
@@ -416,16 +378,6 @@ int get_scl(void);
 #define CONFIG_KM_DEF_ENV "km-common=empty\0"
 #endif
 
-#ifndef MTDIDS_DEFAULT
-# define MTDIDS_DEFAULT                "nand0=fsl_elbc_nand"
-#endif /* MTDIDS_DEFAULT */
-
-#ifndef MTDPARTS_DEFAULT
-# define MTDPARTS_DEFAULT      "mtdparts="                     \
-       "fsl_elbc_nand:"                                                \
-               "-(" CONFIG_KM_UBI_PARTITION_NAME_BOOT ");"
-#endif /* MTDPARTS_DEFAULT */
-
 /* architecture specific default bootargs */
 #define CONFIG_KM_DEF_BOOT_ARGS_CPU            ""
 
@@ -436,7 +388,7 @@ int get_scl(void);
                "cramfsload ${fdt_addr_r} "                             \
                "fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb\0"             \
        "fdt_addr_r=" __stringify(CONFIG_KM_FDT_ADDR) "\0"              \
-       "u-boot="__stringify(CONFIG_HOSTNAME) "/u-boot.pbl\0"           \
+       "u-boot="CONFIG_HOSTNAME "/u-boot.pbl\0"                \
        "update="                                                       \
                "sf probe 0;sf erase 0 +${filesize};"                   \
                "sf write ${load_addr_r} 0 ${filesize};\0"              \