+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2009
* Marvell Semiconductor <www.marvell.com>
*
* (C) Copyright 2010-2011
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
/*
/*
* High Level Configuration Options (easy to change)
*/
-#define CONFIG_MARVELL
#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
#define CONFIG_KW88F6281 /* SOC Name */
-#define CONFIG_MACH_KM_KIRKWOOD /* Machine type */
#define CONFIG_MACH_TYPE MACH_TYPE_KM_KIRKWOOD
#define CONFIG_NAND_ECC_BCH
-#define CONFIG_BCH
/* include common defines/options for all Keymile boards */
#include "keymile-common.h"
-#define CONFIG_CMD_NAND
-
/* SPI NOR Flash default params, used by sf commands */
#define CONFIG_SF_DEFAULT_SPEED 8100000
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
#include "asm/arch/config.h"
-#define CONFIG_SYS_TEXT_BASE 0x07d00000 /* code address before reloc */
#define CONFIG_SYS_MEMTEST_START 0x00400000 /* 4M */
#define CONFIG_SYS_MEMTEST_END 0x007fffff /*(_8M -1) */
#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */
" boardid=0x${IVM_BoardId} hwkey=0x${IVM_HWKey}"
#define CONFIG_KM_DEF_ENV_CPU \
- "u-boot="__stringify(CONFIG_HOSTNAME) "/u-boot.kwb\0" \
+ "u-boot="CONFIG_HOSTNAME "/u-boot.kwb\0" \
CONFIG_KM_UPDATE_UBOOT \
"set_fdthigh=setenv fdt_high ${kernelmem}\0" \
"checkfdt=" \
""
#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
-#define CONFIG_MISC_INIT_R
/*
* NS16550 Configuration
* for your console driver.
*/
-#define CONFIG_CONS_INDEX 1 /* Console on UART0 */
-
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* Other required minimal configurations
*/
#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */
-#define CONFIG_NR_DRAM_BANKS 4
#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */
/*
* Ethernet Driver configuration
*/
#define CONFIG_NETCONSOLE /* include NetConsole support */
-#define CONFIG_MII /* expose smi ove miiphy interface */
-#define CONFIG_MVGBE /* Enable Marvell Gbe Controller Driver */
#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */
#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
#define CONFIG_PHY_BASE_ADR 0
#define FLASH_GPIO_PIN 0x00010000
#define KM_FLASH_GPIO_PIN 16
-#ifndef MTDIDS_DEFAULT
-# define MTDIDS_DEFAULT "nand0=orion_nand"
-#endif /* MTDIDS_DEFAULT */
-
-#ifndef MTDPARTS_DEFAULT
-# define MTDPARTS_DEFAULT "mtdparts=" \
- "orion_nand:" \
- "-(" CONFIG_KM_UBI_PARTITION_NAME_BOOT ");"
-#endif /* MTDPARTS_DEFAULT */
-
#define CONFIG_KM_UPDATE_UBOOT \
"update=" \
"sf probe 0;sf erase 0 +${filesize};" \
""
#if !defined(CONFIG_MTD_NOR_FLASH)
-#undef CONFIG_FLASH_CFI_MTD
#undef CONFIG_JFFS2_CMDLINE
#endif
#define CONFIG_KM_RESERVED_PRAM 0x801000
/* address for the bootcount (taken from end of RAM) */
#define BOOTCOUNT_ADDR (CONFIG_KM_RESERVED_PRAM)
-/* Use generic bootcount RAM driver */
-#define CONFIG_BOOTCOUNT_RAM
/* enable POST tests */
#define CONFIG_POST (CONFIG_SYS_POST_MEM_REGIONS)