configs: Remove a number of unreferenced CONFIG options.

[platform/kernel/u-boot.git] / include / configs / km / km-powerpc.h

diff --git a/include/configs/km/km-powerpc.h b/include/configs/km/km-powerpc.h
index 8293607..20a36fb 100644 (file)
--- a/include/configs/km/km-powerpc.h
+++ b/include/configs/km/km-powerpc.h
@@ -1,41 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2011
  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_KEYMILE_POWERPC_H
 #define __CONFIG_KEYMILE_POWERPC_H
 
 /* Do boardspecific init for all boards */
-#define CONFIG_BOARD_EARLY_INIT_R
-#define CONFIG_LAST_STAGE_INIT
 
-#define CONFIG_BOOTCOUNT_LIMIT
-
-#define CONFIG_CMD_DTT
-#define CONFIG_JFFS2_CMDLINE
-
-/* standard km ethernet_present for piggy */
-#define CONFIG_KM_COMMON_ETH_INIT
-
-/* EEprom support 24C08, 24C16, 24C64 */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      3  /* 8 Byte write page */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  10
-
-#define CONFIG_ENV_SIZE                0x04000         /* Size of Environment */
-#define CONFIG_FLASH_CFI_MTD
-
-#define CONFIG_SYS_MEMTEST_START 0x00100000    /* memtest works on */
-
-#define CONFIG_SYS_MEMTEST_END 0x00f00000      /* 1 ... 15 MB in DRAM  */
-
-#define CONFIG_SYS_LOAD_ADDR   0x100000        /* default load address */
-
-/* Reserve 4 MB for malloc */
-#define CONFIG_SYS_MALLOC_LEN          (4 * 1024 * 1024)
+/* Increase max size of compressed kernel */
 
 /******************************************************************************
  * (PRAM usage)
@@ -52,25 +26,15 @@
 
 /* size of rootfs in RAM */
 #define CONFIG_KM_ROOTFSSIZE   0x0
-/* pseudo-non volatile RAM [hex] */
-#define CONFIG_KM_PNVRAM       0x80000
-/* physical RAM MTD size [hex] */
-#define CONFIG_KM_PHRAM                0x100000
-/* resereved pram area at the end of memroy [hex] */
-#define CONFIG_KM_RESERVED_PRAM        0x0
 /* set the default PRAM value to at least PNVRAM + PHRAM when pram env variable
  * is not valid yet, which is the case for when u-boot copies itself to RAM */
 #define CONFIG_PRAM            ((CONFIG_KM_PNVRAM + CONFIG_KM_PHRAM)>>10)
 
-#define CONFIG_KM_CRAMFS_ADDR  0xC00000
-#define CONFIG_KM_KERNEL_ADDR  0x400000        /* 7680Kbytes */
-#define CONFIG_KM_FDT_ADDR     0xB80000        /* 512Kbytes */
-
 /* architecture specific default bootargs */
 #define CONFIG_KM_DEF_BOOT_ARGS_CPU            ""
 
 #define CONFIG_KM_DEF_ENV_CPU                                          \
-       "u-boot="__stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"           \
+       "u-boot="CONFIG_HOSTNAME "/u-boot.bin\0"                \
        "update="                                                       \
                "protect off " __stringify(BOOTFLASH_START) " +${filesize} && "\
                "erase " __stringify(BOOTFLASH_START) "  +${filesize} && "\
@@ -79,6 +43,7 @@
                "protect on " __stringify(BOOTFLASH_START) "  +${filesize}\0"\
        "set_fdthigh=true\0"                                            \
        "checkfdt=true\0"                                               \
+       "bootm_mapsize=" __stringify(CONFIG_SYS_BOOTM_LEN) "\0"         \
        ""
 
 #endif /* __CONFIG_KEYMILE_POWERPC_H */