#define CONFIG_BOOTCOUNT_LIMIT
/*
+ * By default kwbimage.cfg from board specific folder is used
+ * If for some board, different configuration file need to be used,
+ * CONFIG_SYS_KWD_CONFIG should be defined in board specific header file
+ */
+#ifndef CONFIG_SYS_KWD_CONFIG
+#define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage.cfg
+#endif /* CONFIG_SYS_KWD_CONFIG */
+
+/*
+ * CONFIG_SYS_TEXT_BASE can be defined in board specific header file, if needed
+ */
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE 0x00400000
+#endif /* CONFIG_SYS_TEXT_BASE */
+
+/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_I2C
#define CONFIG_CMD_JFFS2
#define CONFIG_JFFS2_CMDLINE
+#define CONFIG_CMD_MTDPARTS
#undef CONFIG_WATCHDOG /* disable platform specific watchdog */
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
-#define CONFIG_COMMAND_HISTORY 1
#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
#define CONFIG_HUSH_INIT_VAR 1
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+#define CONFIG_SYS_BOARD_DRAM_INIT /* Used board specific dram_init */
/*
* How to get access to the slot ID. Put this here to make it easy
#define CONFIG_SYS_SLOT_ID_MASK (0x3f) /* mask for slot ID bits */
#define CONFIG_I2C_MULTI_BUS 1
-#define CONFIG_SYS_MAX_I2C_BUS 2
+#define CONFIG_SYS_MAX_I2C_BUS 1
#define CONFIG_SYS_I2C_INIT_BOARD 1
#define CONFIG_I2C_MUX 1
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_ENV_SIZE 0x04000 /* Size of Environment */
+
+#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
+
+/* UBI Support for all Keymile boards */
+#define CONFIG_CMD_UBI
+#define CONFIG_RBTREE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_FLASH_CFI_MTD
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_CONCAT
+
/* define this to use the keymile's io muxing feature */
/*#define CONFIG_IO_MUXING */
#ifdef CONFIG_IO_MUXING
#define CONFIG_KM_DEF_ENV_IOMUX \
- "nc=setenv ethact HDLC ETHERNET \0" \
- "nce=setenv ethact SCC ETHERNET \0" \
+ "nc=setenv ethact HDLC \0" \
+ "nce=setenv ethact SCC \0" \
"stderr=serial,nc \0" \
"stdin=serial,nc \0" \
"stdout=serial,nc \0" \
"kernel_addr_r=200000\0" \
"fdt_addr_r=600000\0" \
"ram_ws=800000 \0" \
- "autoscr_ws=780000 \0" \
+ "script_ws=780000 \0" \
"fdt_file=" xstr(CONFIG_HOSTNAME) "/" \
xstr(CONFIG_HOSTNAME) ".dtb\0" \
"u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin \0" \
"set_new_esw_script=setenv new_esw_script " \
"new_esw_0x${IVM_BoardId}_0x${IVM_HWKey}.scr \0" \
"new_esw=run set_new_esw_script; " \
- "tftp ${autoscr_ws} ${new_esw_script}; " \
- "iminfo ${autoscr_ws}; source ${autoscr_ws} \0" \
+ "tftp ${script_ws} ${new_esw_script}; " \
+ "iminfo ${script_ws}; source ${script_ws} \0" \
"bootlimit=0 \0" \
CONFIG_KM_DEF_ENV_IOMUX \
CONFIG_KM_DEF_ENV_PRIVATE \