/* Do boardspecific init for all boards */
#define CONFIG_BOARD_EARLY_INIT_R 1
-#if defined(CONFIG_MGCOGE) || defined(CONFIG_MGSUVD)
#define CONFIG_BOOTCOUNT_LIMIT
-#endif
/*
* Command line configuration.
#define CONFIG_CMD_IMMAP
#define CONFIG_CMD_MII
#define CONFIG_CMD_PING
-
-/* should go away, if kmeter I2C support is enabled */
-#if defined(CONFIG_MGCOGE) || defined(CONFIG_MGSUVD)
#define CONFIG_CMD_DTT
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_I2C
-#endif
+#define CONFIG_CMD_JFFS2
+#define CONFIG_JFFS2_CMDLINE
+#define CONFIG_CMD_MTDPARTS
#undef CONFIG_WATCHDOG /* disable platform specific watchdog */
-#define CONFIG_BOOTCOMMAND "run net_nfs"
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
+#define CONFIG_COMMAND_HISTORY 1
+#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
-/* should go away, if kmeter I2C support is enabled */
-#if defined(CONFIG_MGCOGE) || defined(CONFIG_MGSUVD)
#define CONFIG_HUSH_INIT_VAR 1
-#endif
#define CONFIG_SYS_ALT_MEMTEST /* memory test, takes time */
#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
#define CONFIG_SYS_SLOT_ID_OFF (0x07) /* register offset */
#define CONFIG_SYS_SLOT_ID_MASK (0x3f) /* mask for slot ID bits */
+#define CONFIG_I2C_MULTI_BUS 1
+#define CONFIG_SYS_MAX_I2C_BUS 1
+#define CONFIG_SYS_I2C_INIT_BOARD 1
+#define CONFIG_I2C_MUX 1
+
+/* EEprom support */
+#define CONFIG_SYS_I2C_MULTI_EEPROMS 1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
+
+/* Support the IVM EEprom */
+#define CONFIG_SYS_IVM_EEPROM_ADR 0x50
+#define CONFIG_SYS_IVM_EEPROM_MAX_LEN 0x400
+#define CONFIG_SYS_IVM_EEPROM_PAGE_LEN 0x100
+
+#define CONFIG_SYS_FLASH_PROTECTION 1
+
/*
* BOOTP options
*/
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_ENV_SIZE 0x04000 /* Size of Environment */
+
+#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */
+
+/* UBI Support for all Keymile boards */
+#define CONFIG_CMD_UBI
+#define CONFIG_RBTREE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_FLASH_CFI_MTD
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_CONCAT
+
+/* define this to use the keymile's io muxing feature */
+/*#define CONFIG_IO_MUXING */
+
+#ifdef CONFIG_IO_MUXING
+#define CONFIG_KM_DEF_ENV_IOMUX \
+ "nc=setenv ethact HDLC ETHERNET \0" \
+ "nce=setenv ethact SCC ETHERNET \0" \
+ "stderr=serial,nc \0" \
+ "stdin=serial,nc \0" \
+ "stdout=serial,nc \0" \
+ "tftpsrcp=69 \0" \
+ "tftpdstp=69 \0"
+#else
+#define CONFIG_KM_DEF_ENV_IOMUX \
+ "stderr=serial \0" \
+ "stdin=serial \0" \
+ "stdout=serial \0"
+#endif
+
+#ifndef CONFIG_KM_DEF_ENV_PRIVATE
+#define CONFIG_KM_DEF_ENV_PRIVATE \
+ "kmprivate=empty\0"
+#endif
+
+#define xstr(s) str(s)
+#define str(s) #s
+
+#ifndef CONFIG_KM_DEF_ENV
+#define CONFIG_KM_DEF_ENV \
+ "netdev=eth0\0" \
+ "u-boot_addr_r=100000\0" \
+ "kernel_addr_r=200000\0" \
+ "fdt_addr_r=600000\0" \
+ "ram_ws=800000 \0" \
+ "script_ws=780000 \0" \
+ "fdt_file=" xstr(CONFIG_HOSTNAME) "/" \
+ xstr(CONFIG_HOSTNAME) ".dtb\0" \
+ "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin \0" \
+ "kernel_file=" xstr(CONFIG_HOSTNAME) "/uImage \0" \
+ "load=tftp ${u-boot_addr_r} ${u-boot}\0" \
+ "update=protect off " xstr(BOOTFLASH_START) " +${filesize};" \
+ "erase " xstr(BOOTFLASH_START) " +${filesize};" \
+ "cp.b ${u-boot_addr_r} " xstr(BOOTFLASH_START) \
+ " ${filesize};" \
+ "protect on " xstr(BOOTFLASH_START) " +${filesize}\0" \
+ "load_fdt=tftp ${fdt_addr_r} ${fdt_file}; " \
+ "setenv actual_fdt_addr ${fdt_addr_r} \0" \
+ "load_kernel=tftp ${kernel_addr_r} ${kernel_file}; " \
+ "setenv actual_kernel_addr ${kernel_addr_r} \0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "mtdargs=setenv bootargs root=${actual_rootfs} rw " \
+ "rootfstype=jffs2 \0" \
+ "altmtdargs=setenv bootargs root=${backup_rootfs} rw " \
+ "rootfstype=jffs2 \0" \
+ "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "addboardid=setenv bootargs ${bootargs} " \
+ "hwKey=${IVM_HWKey} boardId=0x${IVM_BoardId} \0" \
+ "addpram=setenv bootargs ${bootargs} " \
+ "mem=${mem} pram=${pram}\0" \
+ "pram=" xstr(CONFIG_PRAM) "k\0" \
+ "net_nfs=tftp ${kernel_addr_r} ${kernel_file}; " \
+ "tftp ${fdt_addr_r} ${fdt_file}; " \
+ "run nfsargs addip addcon addboardid addpram;" \
+ "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
+ "net_self=tftp ${kernel_addr_r} ${kernel_file}; " \
+ "tftp ${fdt_addr_r} ${fdt_file}; " \
+ "tftp ${ramdisk_addr} ${ramdisk_file}; " \
+ "run ramargs addip addboardid addpram; " \
+ "bootm ${kernel_addr_r} ${ramdisk_addr} ${fdt_addr_r}\0"\
+ "flash_nfs=run nfsargs addip addcon;" \
+ "bootm ${kernel_addr} - ${fdt_addr}\0" \
+ "flash_self=run ramargs addip addcon addboardid addpram;" \
+ "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
+ "bootcmd=run mtdargs addip addcon addboardid addpram; " \
+ "bootm ${actual_kernel_addr} - ${actual_fdt_addr} \0" \
+ "altbootcmd=run altmtdargs addip addcon addboardid addpram; " \
+ "bootm ${backup_kernel_addr} - ${backup_fdt_addr} \0" \
+ "actual0=setenv actual_bank 0; setenv actual_kernel_addr " \
+ "${bank0_kernel_addr}; " \
+ "setenv actual_fdt_addr ${bank0_fdt_addr}; " \
+ "setenv actual_rootfs ${bank0_rootfs} \0" \
+ "actual1=setenv actual_bank 1; setenv actual_kernel_addr " \
+ "${bank1_kernel_addr}; " \
+ "setenv actual_fdt_addr ${bank1_fdt_addr}; " \
+ "setenv actual_rootfs ${bank1_rootfs} \0" \
+ "backup0=setenv backup_bank 0; setenv backup_kernel_addr " \
+ "${bank0_kernel_addr}; " \
+ "setenv backup_fdt_addr ${bank0_fdt_addr}; " \
+ "setenv backup_rootfs ${bank0_rootfs} \0" \
+ "backup1=setenv backup_bank 1; setenv backup_kernel_addr " \
+ "${bank1_kernel_addr}; " \
+ "setenv backup_fdt_addr ${bank1_fdt_addr}; " \
+ "setenv backup_rootfs ${bank1_rootfs} \0" \
+ "setbank0=run actual0 backup1 \0" \
+ "setbank1=run actual1 backup0 \0" \
+ "release=setenv bootcmd " \
+ "\'run mtdargs addip addcon addboardid addpram;" \
+ "bootm ${actual_kernel_addr} - ${actual_fdt_addr} \'; " \
+ "saveenv \0" \
+ "develop=setenv bootcmd " \
+ "\'run nfsargs addip addcon addboardid addpram;" \
+ "bootm ${actual_kernel_addr} - ${actual_fdt_addr} \'; " \
+ "saveenv \0" \
+ "developall=setenv bootcmd " \
+ "\'run load_fdt load_kernel nfsargs " \
+ "addip addcon addboardid addpram; " \
+ "bootm ${actual_kernel_addr} - ${actual_fdt_addr} \'; " \
+ "saveenv \0" \
+ "set_new_esw_script=setenv new_esw_script " \
+ "new_esw_0x${IVM_BoardId}_0x${IVM_HWKey}.scr \0" \
+ "new_esw=run set_new_esw_script; " \
+ "tftp ${script_ws} ${new_esw_script}; " \
+ "iminfo ${script_ws}; source ${script_ws} \0" \
+ "bootlimit=0 \0" \
+ CONFIG_KM_DEF_ENV_IOMUX \
+ CONFIG_KM_DEF_ENV_PRIVATE \
+ ""
+#endif /* CONFIG_KM_DEF_ENV */
+
+#define CONFIG_VERSION_VARIABLE /* include version env variable */
+
#endif /* __CONFIG_KEYMILE_H */
projects / platform / kernel / u-boot.git / blobdiff