+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Configuration header file for TI's k2g-evm
*
* (C) Copyright 2015
* Texas Instruments Incorporated, <www.ti.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_K2G_EVM_H
#define __CONFIG_K2G_EVM_H
+#include <environment/ti/mmc.h>
#include <environment/ti/spi.h>
-/* Platform type */
-#define CONFIG_SOC_K2G
-
/* U-Boot general configuration */
-#define CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \
+#define ENV_KS2_BOARD_SETTINGS \
DEFAULT_MMC_TI_ARGS \
DEFAULT_PMMC_BOOT_ENV \
DEFAULT_FW_INITRAMFS_BOOT_ENV \
+ DEFAULT_FIT_TI_ARGS \
"boot=mmc\0" \
"console=ttyS0,115200n8\0" \
"bootpart=0:2\0" \
"rd_spec=-\0" \
"args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \
"root=ubi0:rootfs rootflags=sync rw ubi.mtd=ubifs,2048\0" \
- "name_fdt=keystone-k2g-evm.dtb\0" \
+ "findfdt="\
+ "if test $board_name = 66AK2GGP; then " \
+ "setenv name_fdt keystone-k2g-evm.dtb; " \
+ "else if test $board_name = 66AK2GG1; then " \
+ "setenv name_fdt keystone-k2g-evm.dtb; " \
+ "else if test $board_name = 66AK2GIC; then " \
+ "setenv name_fdt keystone-k2g-ice.dtb; " \
+ "else if test $board_name = 66AK2GI1; then " \
+ "setenv name_fdt keystone-k2g-ice.dtb; " \
+ "else if test $name_fdt = undefined; then " \
+ "echo WARNING: Could not determine device tree to use;"\
+ "fi;fi;fi;fi; setenv fdtfile ${name_fdt}\0" \
"name_mon=skern-k2g.bin\0" \
"name_ubi=k2g-evm-ubifs.ubi\0" \
"name_uboot=u-boot-spi-k2g-evm.gph\0" \
"get_mon_mmc=load mmc ${bootpart} ${addr_mon} ${bootdir}/${name_mon}\0"\
"name_fs=arago-base-tisdk-image-k2g-evm.cpio\0"
-#define CONFIG_BOOTCOMMAND \
- "run envboot; " \
- "run set_name_pmmc init_${boot} init_fw_rd_${boot} " \
- "get_pmmc_${boot} run_pmmc get_mon_${boot} run_mon " \
- "get_fdt_${boot} get_kern_${boot} run_kern"
-
-#include <configs/ti_armv7_keystone2.h>
-
-/* SPL SPI Loader Configuration */
-#define CONFIG_SPL_TEXT_BASE 0x0c080000
-
-/* NAND Configuration */
-#define CONFIG_SYS_NAND_PAGE_2K
-
/* Network */
-#define CONFIG_KSNET_NETCP_V1_5
-#define CONFIG_KSNET_CPSW_NUM_PORTS 2
-#define CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE
-#define CONFIG_PHY_MICREL
+#define CFG_KSNET_CPSW_NUM_PORTS 2
#define PHY_ANEG_TIMEOUT 10000 /* PHY needs longer aneg time */
-#undef CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_IS_IN_FAT
-#define FAT_ENV_INTERFACE "mmc"
-#define FAT_ENV_DEVICE_AND_PART "0:1"
-#define FAT_ENV_FILE "uboot.env"
-
-#define CONFIG_SF_DEFAULT_BUS 1
-#define CONFIG_SF_DEFAULT_CS 0
+#define SPI_MTD_PARTS KEYSTONE_SPI1_MTD_PARTS
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_CADENCE_QSPI
-#define CONFIG_CQSPI_REF_CLK 384000000
-#define CONFIG_CQSPI_DECODER 0x0
-#define CONFIG_BOUNCE_BUFFER
-#endif
+#include <configs/ti_armv7_keystone2.h>
-#define SPI_MTD_PARTS KEYSTONE_SPI1_MTD_PARTS
#endif /* __CONFIG_K2G_EVM_H */