hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c

[platform/kernel/u-boot.git] / include / configs / jupiter.h

diff --git a/include/configs/jupiter.h b/include/configs/jupiter.h
index 9c45acf..b5c6fae 100644 (file)
--- a/include/configs/jupiter.h
+++ b/include/configs/jupiter.h
@@ -33,14 +33,20 @@
 #define CONFIG_MPC5200         1       /* especially an MPC5200 */
 #define CONFIG_JUPITER         1       /* ... on Jupiter board */
 
+/*
+ * Valid values for CONFIG_SYS_TEXT_BASE are:
+ * 0xFFF00000  boot high (standard configuration)
+ * 0x00100000  boot from RAM (for testing only)
+ */
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE   0xFFF00000
+#endif
+
 #define CONFIG_SYS_MPC5XXX_CLKIN       33000000 /* ... running at 33.000000MHz */
 
 #define CONFIG_BOARD_EARLY_INIT_R      1
 #define CONFIG_BOARD_EARLY_INIT_F      1
 
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM          0x02    /* Software reboot           */
-
 #define CONFIG_HIGH_BATS       1       /* High BATs supported */
 
 /*
@@ -73,7 +79,6 @@
 
 #define CONFIG_SYS_XLB_PIPELINING      1
 
-#define CONFIG_NET_MULTI       1
 #define CONFIG_MII             1
 #define CONFIG_SYS_RX_ETH_BUFFER       8  /* use 8 rx buffer on eepro100  */
 
@@ -184,7 +189,7 @@
 
 #define CONFIG_SYS_MAX_FLASH_SECT      128     /* max num of sects on one chip */
 
-#define CONFIG_ENV_ADDR                (TEXT_BASE + 0x40000) /* third sector */
+#define CONFIG_ENV_ADDR                (CONFIG_SYS_TEXT_BASE + 0x40000) /* third sector */
 
 #define CONFIG_SYS_FLASH_ERASE_TOUT    240000  /* Flash Erase Timeout (in ms)  */
 #define CONFIG_SYS_FLASH_WRITE_TOUT    500     /* Flash Write Timeout (in ms)  */
@@ -219,14 +224,13 @@
 
 /* Use SRAM until RAM will be available */
 #define CONFIG_SYS_INIT_RAM_ADDR       MPC5XXX_SRAM
-#define CONFIG_SYS_INIT_RAM_END        MPC5XXX_SRAM_SIZE       /* End of used area in DPRAM */
+#define CONFIG_SYS_INIT_RAM_SIZE       MPC5XXX_SRAM_SIZE       /* Size of used area in DPRAM */
 
 
-#define CONFIG_SYS_GBL_DATA_SIZE       128     /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_TEXT_BASE
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 #   define CONFIG_SYS_RAMBOOT          1
 #endif
@@ -259,9 +263,6 @@
 
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history     */
 #define CONFIG_SYS_HUSH_PARSER         1       /* Use the HUSH parser          */
-#ifdef CONFIG_SYS_HUSH_PARSER
-#define        CONFIG_SYS_PROMPT_HUSH_PS2      "> "
-#endif
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE              1024    /* Console I/O Buffer Size  */
 #else