Convert CONFIG_SYS_BOOTM_LEN to Kconfig

[platform/kernel/u-boot.git] / include / configs / j721s2_evm.h

diff --git a/include/configs/j721s2_evm.h b/include/configs/j721s2_evm.h
index 6fd098c..932d7d3 100644 (file)
--- a/include/configs/j721s2_evm.h
+++ b/include/configs/j721s2_evm.h
@@ -21,48 +21,12 @@
 
 /* SPL Loader Configuration */
 #if defined(CONFIG_TARGET_J721S2_A72_EVM) || defined(CONFIG_TARGET_J7200_A72_EVM)
-#define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SPL_TEXT_BASE +        \
-                                        CONFIG_SYS_K3_NON_SECURE_MSRAM_SIZE)
 #define CONFIG_SYS_UBOOT_BASE          0x50280000
 /* Image load address in RAM for DFU boot*/
 #else
 #define CONFIG_SYS_UBOOT_BASE          0x50080000
-/*
- * Maximum size in memory allocated to the SPL BSS. Keep it as tight as
- * possible (to allow the build to go through), as this directly affects
- * our memory footprint. The less we use for BSS the more we have available
- * for everything else.
- */
-#define CONFIG_SPL_BSS_MAX_SIZE                0xA000
-/*
- * Link BSS to be within SPL in a dedicated region located near the top of
- * the MCU SRAM, this way making it available also before relocation. Note
- * that we are not using the actual top of the MCU SRAM as there is a memory
- * location filled in by the boot ROM that we want to read out without any
- * interference from the C context.
- */
-#define CONFIG_SPL_BSS_START_ADDR      (0x41c80000 -\
-                                        CONFIG_SPL_BSS_MAX_SIZE)
-/* Set the stack right below the SPL BSS section */
-#define CONFIG_SYS_INIT_SP_ADDR         CONFIG_SPL_BSS_START_ADDR
-/* Configure R5 SPL post-relocation malloc pool in DDR */
-#define CONFIG_SYS_SPL_MALLOC_START    0x84000000
-#define CONFIG_SYS_SPL_MALLOC_SIZE     SZ_16M
-/* Image load address in RAM for DFU boot*/
-#endif
-
-#ifdef CONFIG_SYS_K3_SPL_ATF
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "tispl.bin"
 #endif
 
-#define CONFIG_SPL_MAX_SIZE            CONFIG_SYS_K3_MAX_DOWNLODABLE_IMAGE_SIZE
-
-#define CONFIG_SYS_BOOTM_LEN           SZ_64M
-#define CONFIG_CQSPI_REF_CLK           133333333
-
-/* HyperFlash related configuration */
-#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
-
 /* U-Boot general configuration */
 #define EXTRA_ENV_J721S2_BOARD_SETTINGS                                        \
        "default_device_tree=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0"      \
@@ -162,14 +126,6 @@
        DFU_ALT_INFO_RAM \
        DFU_ALT_INFO_OSPI
 
-#if defined(CONFIG_TARGET_J721S2_A72_EVM) || defined(CONFIG_TARGET_J7200_A72_EVM)
-#define EXTRA_ENV_J721S2_BOARD_SETTINGS_MTD                            \
-       "mtdids=" CONFIG_MTDIDS_DEFAULT "\0"                            \
-       "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"
-#else
-#define EXTRA_ENV_J721S2_BOARD_SETTINGS_MTD
-#endif
-
 /* Incorporate settings into the U-Boot environment */
 #define CONFIG_EXTRA_ENV_SETTINGS                                      \
        DEFAULT_LINUX_BOOT_ENV                                          \
@@ -180,7 +136,6 @@
        EXTRA_ENV_RPROC_SETTINGS                                        \
        EXTRA_ENV_DFUARGS                                               \
        DEFAULT_UFS_TI_ARGS                                             \
-       EXTRA_ENV_J721S2_BOARD_SETTINGS_MTD                             \
        EXTRA_ENV_CONFIG_MAIN_CPSW0_QSGMII_PHY
 
 /* Now for the remaining common defines */