#define __CONFIG_J721E_EVM_H
#include <linux/sizes.h>
-#include <environment/ti/mmc.h>
-#include <environment/ti/k3_rproc.h>
-#include <environment/ti/ufs.h>
-#include <environment/ti/k3_dfu.h>
/* DDR Configuration */
#define CFG_SYS_SDRAM_BASE1 0x880000000
#define CFG_SYS_UBOOT_BASE 0x50080000
#endif
-/* HyperFlash related configuration */
-
-/* U-Boot general configuration */
-#define EXTRA_ENV_J721E_BOARD_SETTINGS \
- "default_device_tree=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
- "findfdt=" \
- "setenv name_fdt ${default_device_tree};" \
- "if test $board_name = j721e; then " \
- "setenv name_fdt k3-j721e-common-proc-board.dtb; fi;" \
- "if test $board_name = j721e-eaik || test $board_name = j721e-sk; then " \
- "setenv name_fdt k3-j721e-sk.dtb; fi;" \
- "setenv fdtfile ${name_fdt}\0" \
- "name_kern=Image\0" \
- "console=ttyS2,115200n8\0" \
- "args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000 " \
- "${mtdparts}\0" \
- "run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}\0"
-
-#define PARTS_DEFAULT \
- /* Linux partitions */ \
- "uuid_disk=${uuid_gpt_disk};" \
- "name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs}\0"
-
-#ifdef CONFIG_SYS_K3_SPL_ATF
-#if defined(CONFIG_TARGET_J721E_R5_EVM)
-#define EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC \
- "addr_mcur5f0_0load=0x89000000\0" \
- "name_mcur5f0_0fw=/lib/firmware/j7-mcu-r5f0_0-fw\0"
-#elif defined(CONFIG_TARGET_J7200_R5_EVM)
-#define EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC \
- "addr_mcur5f0_0load=0x89000000\0" \
- "name_mcur5f0_0fw=/lib/firmware/j7200-mcu-r5f0_0-fw\0"
-#endif /* CONFIG_TARGET_J721E_R5_EVM */
-#else
-#define EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC ""
-#endif /* CONFIG_SYS_K3_SPL_ATF */
-
-/* U-Boot MMC-specific configuration */
-#define EXTRA_ENV_J721E_BOARD_SETTINGS_MMC \
- "boot=mmc\0" \
- "mmcdev=1\0" \
- "bootpart=1:2\0" \
- "bootdir=/boot\0" \
- EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC \
- "rd_spec=-\0" \
- "init_mmc=run args_all args_mmc\0" \
- "get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${name_fdt}\0" \
- "get_overlay_mmc=" \
- "fdt address ${fdtaddr};" \
- "fdt resize 0x100000;" \
- "for overlay in $name_overlays;" \
- "do;" \
- "load mmc ${bootpart} ${dtboaddr} ${bootdir}/${overlay} && " \
- "fdt apply ${dtboaddr};" \
- "done;\0" \
- "partitions=" PARTS_DEFAULT \
- "get_kern_mmc=load mmc ${bootpart} ${loadaddr} " \
- "${bootdir}/${name_kern}\0" \
- "get_fit_mmc=load mmc ${bootpart} ${addr_fit} " \
- "${bootdir}/${name_fit}\0" \
- "partitions=" PARTS_DEFAULT
-
-/* Set the default list of remote processors to boot */
-#if defined(CONFIG_TARGET_J7200_A72_EVM)
-#define EXTRA_ENV_CONFIG_MAIN_CPSW0_QSGMII_PHY \
- "do_main_cpsw0_qsgmii_phyinit=1\0" \
- "init_main_cpsw0_qsgmii_phy=gpio set gpio@22_17;" \
- "gpio clear gpio@22_16\0" \
- "main_cpsw0_qsgmii_phyinit=" \
- "if test ${do_main_cpsw0_qsgmii_phyinit} -eq 1 && test ${dorprocboot} -eq 1 && " \
- "test ${boot} = mmc; then " \
- "run init_main_cpsw0_qsgmii_phy;" \
- "fi;\0"
-#ifdef DEFAULT_RPROCS
-#undef DEFAULT_RPROCS
-#endif
-#elif defined(CONFIG_TARGET_J721E_A72_EVM)
-#define EXTRA_ENV_CONFIG_MAIN_CPSW0_QSGMII_PHY \
- "init_main_cpsw0_qsgmii_phy=gpio set gpio@22_17;" \
- "gpio clear gpio@22_16\0" \
- "main_cpsw0_qsgmii_phyinit=" \
- "if test $board_name = J721EX-PM1-SOM || test $board_name = J721EX-PM2-SOM " \
- "|| test $board_name = j721e; then " \
- "do_main_cpsw0_qsgmii_phyinit=1; else " \
- "do_main_cpsw0_qsgmii_phyinit=0; fi;" \
- "if test ${do_main_cpsw0_qsgmii_phyinit} -eq 1 && test ${dorprocboot} -eq 1 && " \
- "test ${boot} = mmc; then " \
- "run init_main_cpsw0_qsgmii_phy;" \
- "fi;\0"
-#ifdef DEFAULT_RPROCS
-#undef DEFAULT_RPROCS
-#endif
-#endif
-
-#ifdef CONFIG_TARGET_J721E_A72_EVM
-#define DEFAULT_RPROCS "" \
- "2 /lib/firmware/j7-main-r5f0_0-fw " \
- "3 /lib/firmware/j7-main-r5f0_1-fw " \
- "4 /lib/firmware/j7-main-r5f1_0-fw " \
- "5 /lib/firmware/j7-main-r5f1_1-fw " \
- "6 /lib/firmware/j7-c66_0-fw " \
- "7 /lib/firmware/j7-c66_1-fw " \
- "8 /lib/firmware/j7-c71_0-fw "
-#endif /* CONFIG_TARGET_J721E_A72_EVM */
-
-#ifdef CONFIG_TARGET_J7200_A72_EVM
-#define DEFAULT_RPROCS "" \
- "2 /lib/firmware/j7200-main-r5f0_0-fw " \
- "3 /lib/firmware/j7200-main-r5f0_1-fw "
-#endif /* CONFIG_TARGET_J7200_A72_EVM */
-
-#ifndef EXTRA_ENV_CONFIG_MAIN_CPSW0_QSGMII_PHY
-#define EXTRA_ENV_CONFIG_MAIN_CPSW0_QSGMII_PHY
-#endif
-
-#define EXTRA_ENV_DFUARGS \
- DFU_ALT_INFO_MMC \
- DFU_ALT_INFO_EMMC \
- DFU_ALT_INFO_RAM \
- DFU_ALT_INFO_OSPI
-
#if CONFIG_IS_ENABLED(CMD_PXE)
# define BOOT_TARGET_PXE(func) func(PXE, pxe, na)
#else
/* Incorporate settings into the U-Boot environment */
#define CFG_EXTRA_ENV_SETTINGS \
- DEFAULT_LINUX_BOOT_ENV \
- DEFAULT_MMC_TI_ARGS \
- DEFAULT_FIT_TI_ARGS \
- EXTRA_ENV_J721E_BOARD_SETTINGS \
- EXTRA_ENV_J721E_BOARD_SETTINGS_MMC \
- EXTRA_ENV_RPROC_SETTINGS \
- EXTRA_ENV_DFUARGS \
- DEFAULT_UFS_TI_ARGS \
- EXTRA_ENV_CONFIG_MAIN_CPSW0_QSGMII_PHY \
BOOTENV
/* Now for the remaining common defines */
projects / platform / kernel / u-boot.git / blobdiff