/*
* Configuration header file for K3 J721E EVM
*
- * Copyright (C) 2018-2019 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2018-2020 Texas Instruments Incorporated - https://www.ti.com/
* Lokesh Vutla <lokeshvutla@ti.com>
*/
#include <linux/sizes.h>
#include <config_distro_bootcmd.h>
#include <environment/ti/mmc.h>
-
-#define CONFIG_ENV_SIZE (128 << 10)
+#include <environment/ti/k3_rproc.h>
+#include <environment/ti/ufs.h>
+#include <environment/ti/k3_dfu.h>
/* DDR Configuration */
#define CONFIG_SYS_SDRAM_BASE1 0x880000000
/* SPL Loader Configuration */
-#ifdef CONFIG_TARGET_J721E_A72_EVM
+#if defined(CONFIG_TARGET_J721E_A72_EVM) || defined(CONFIG_TARGET_J7200_A72_EVM)
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SPL_TEXT_BASE + \
CONFIG_SYS_K3_NON_SECURE_MSRAM_SIZE)
+#define CONFIG_SYS_UBOOT_BASE 0x50280000
+/* Image load address in RAM for DFU boot*/
#else
+#define CONFIG_SYS_UBOOT_BASE 0x50080000
/*
* Maximum size in memory allocated to the SPL BSS. Keep it as tight as
* possible (to allow the build to go through), as this directly affects
/* Configure R5 SPL post-relocation malloc pool in DDR */
#define CONFIG_SYS_SPL_MALLOC_START 0x84000000
#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_16M
+/* Image load address in RAM for DFU boot*/
#endif
#ifdef CONFIG_SYS_K3_SPL_ATF
#define CONFIG_SYS_BOOTM_LEN SZ_64M
#define CONFIG_CQSPI_REF_CLK 133333333
+/* HyperFlash related configuration */
+#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
+
/* U-Boot general configuration */
#define EXTRA_ENV_J721E_BOARD_SETTINGS \
"default_device_tree=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
- "findfdt=setenv fdtfile ${default_device_tree}\0" \
- "loadaddr=0x80080000\0" \
- "fdtaddr=0x82000000\0" \
- "overlayaddr=0x83000000\0" \
+ "findfdt=" \
+ "setenv name_fdt ${default_device_tree};" \
+ "setenv fdtfile ${name_fdt}\0" \
"name_kern=Image\0" \
"console=ttyS2,115200n8\0" \
- "args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000\0" \
+ "args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000 " \
+ "${mtdparts}\0" \
"run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}\0"
+#define PARTS_DEFAULT \
+ /* Linux partitions */ \
+ "uuid_disk=${uuid_gpt_disk};" \
+ "name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs}\0"
+
+#ifdef CONFIG_SYS_K3_SPL_ATF
+#if defined(CONFIG_TARGET_J721E_R5_EVM)
+#define EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC \
+ "addr_mainr5f0_0load=0x88000000\0" \
+ "name_mainr5f0_0fw=/lib/firmware/j7-main-r5f0_0-fw\0" \
+ "addr_mcur5f0_0load=0x89000000\0" \
+ "name_mcur5f0_0fw=/lib/firmware/j7-mcu-r5f0_0-fw\0"
+#elif defined(CONFIG_TARGET_J7200_R5_EVM)
+#define EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC \
+ "addr_mcur5f0_0load=0x89000000\0" \
+ "name_mcur5f0_0fw=/lib/firmware/j7200-mcu-r5f0_0-fw\0"
+#endif /* CONFIG_TARGET_J721E_R5_EVM */
+#else
+#define EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC ""
+#endif /* CONFIG_SYS_K3_SPL_ATF */
+
/* U-Boot MMC-specific configuration */
#define EXTRA_ENV_J721E_BOARD_SETTINGS_MMC \
"boot=mmc\0" \
"mmcdev=1\0" \
"bootpart=1:2\0" \
"bootdir=/boot\0" \
+ EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC \
"rd_spec=-\0" \
"init_mmc=run args_all args_mmc\0" \
- "get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
+ "get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${name_fdt}\0" \
"get_overlay_mmc=" \
"fdt address ${fdtaddr};" \
"fdt resize 0x100000;" \
"for overlay in $name_overlays;" \
"do;" \
- "load mmc ${bootpart} ${overlayaddr} ${bootdir}/${overlay} && " \
- "fdt apply ${overlayaddr};" \
+ "load mmc ${bootpart} ${dtboaddr} ${bootdir}/${overlay} && " \
+ "fdt apply ${dtboaddr};" \
"done;\0" \
+ "partitions=" PARTS_DEFAULT \
"get_kern_mmc=load mmc ${bootpart} ${loadaddr} " \
- "${bootdir}/${name_kern}\0"
+ "${bootdir}/${name_kern}\0" \
+ "get_fit_mmc=load mmc ${bootpart} ${addr_fit} " \
+ "${bootdir}/${name_fit}\0" \
+ "partitions=" PARTS_DEFAULT
+
+/* Set the default list of remote processors to boot */
+#if defined(CONFIG_TARGET_J721E_A72_EVM) || defined(CONFIG_TARGET_J7200_A72_EVM)
+#ifdef DEFAULT_RPROCS
+#undef DEFAULT_RPROCS
+#endif
+#endif
+
+#ifdef CONFIG_TARGET_J721E_A72_EVM
+#define DEFAULT_RPROCS "" \
+ "3 /lib/firmware/j7-main-r5f0_1-fw " \
+ "4 /lib/firmware/j7-main-r5f1_0-fw " \
+ "5 /lib/firmware/j7-main-r5f1_1-fw " \
+ "6 /lib/firmware/j7-c66_0-fw " \
+ "7 /lib/firmware/j7-c66_1-fw " \
+ "8 /lib/firmware/j7-c71_0-fw "
+#endif /* CONFIG_TARGET_J721E_A72_EVM */
+
+#ifdef CONFIG_TARGET_J7200_A72_EVM
+#define DEFAULT_RPROCS "" \
+ "2 /lib/firmware/j7200-main-r5f0_0-fw " \
+ "3 /lib/firmware/j7200-main-r5f0_1-fw "
+#endif /* CONFIG_TARGET_J7200_A72_EVM */
+
+/* set default dfu_bufsiz to 128KB (sector size of OSPI) */
+#define EXTRA_ENV_DFUARGS \
+ "dfu_bufsiz=0x20000\0" \
+ DFU_ALT_INFO_MMC \
+ DFU_ALT_INFO_EMMC \
+ DFU_ALT_INFO_RAM \
+ DFU_ALT_INFO_OSPI
+
+#if defined(CONFIG_TARGET_J721E_A72_EVM) || defined(CONFIG_TARGET_J7200_A72_EVM)
+#define EXTRA_ENV_J721E_BOARD_SETTINGS_MTD \
+ "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
+ "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"
+#else
+#define EXTRA_ENV_J721E_BOARD_SETTINGS_MTD
+#endif
/* Incorporate settings into the U-Boot environment */
#define CONFIG_EXTRA_ENV_SETTINGS \
+ DEFAULT_LINUX_BOOT_ENV \
DEFAULT_MMC_TI_ARGS \
+ DEFAULT_FIT_TI_ARGS \
EXTRA_ENV_J721E_BOARD_SETTINGS \
- EXTRA_ENV_J721E_BOARD_SETTINGS_MMC
+ EXTRA_ENV_J721E_BOARD_SETTINGS_MMC \
+ EXTRA_ENV_RPROC_SETTINGS \
+ EXTRA_ENV_DFUARGS \
+ DEFAULT_UFS_TI_ARGS \
+ EXTRA_ENV_J721E_BOARD_SETTINGS_MTD
/* Now for the remaining common defines */
#include <configs/ti_armv7_common.h>
+/* MMC ENV related defines */
+
#endif /* __CONFIG_J721E_EVM_H */
projects / platform / kernel / u-boot.git / blobdiff