ARM: Remove unused stack and irq config defines

[platform/kernel/u-boot.git] / include / configs / integratorcp.h

diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h
index e9b68c6..d5043df 100644 (file)
--- a/include/configs/integratorcp.h
+++ b/include/configs/integratorcp.h
@@ -31,12 +31,18 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+/* Integrator-specific configuration */
 #define CONFIG_INTEGRATOR
-#define CONFIG_ARCH_INTEGRATOR
+#define CONFIG_ARCH_CINTEGRATOR
+#define CONFIG_CM_INIT
+#define CONFIG_CM_REMAP
+#define CONFIG_CM_SPD_DETECT
+
 /*
  * High Level Configuration Options
  * (easy to change)
  */
+#define CONFIG_SYS_TEXT_BASE           0x01000000
 #define CONFIG_SYS_MEMTEST_START       0x100000
 #define CONFIG_SYS_MEMTEST_END         0x10000000
 #define CONFIG_SYS_HZ                  1000
@@ -46,6 +52,7 @@
 #define CONFIG_CMDLINE_TAG             1       /* enable passing of ATAGs  */
 #define CONFIG_SETUP_MEMORY_TAGS       1
 #define CONFIG_MISC_INIT_R             1       /* call misc_init_r during start up */
+
 /*
  * Size of malloc() pool
  */
@@ -54,7 +61,6 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC91111
 #define CONFIG_SMC_USE_32_BIT
 #define CONFIG_SMC91111_BASE    0xC8000000
@@ -68,7 +74,6 @@
 #define CONFIG_PL01x_PORTS     { (void *)CONFIG_SYS_SERIAL0, (void *)CONFIG_SYS_SERIAL1 }
 #define CONFIG_CONS_INDEX      0
 #define CONFIG_BAUDRATE                38400
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 #define CONFIG_SYS_SERIAL0             0x16000000
 #define CONFIG_SYS_SERIAL1             0x17000000
 
@@ -85,32 +90,14 @@
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
-
-
-#if 0
-#define CONFIG_BOOTDELAY       2
-#define CONFIG_BOOTARGS        "root=/dev/nfs nfsroot=<IP address>:/<exported rootfs>  mem=128M ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0"
-#define CONFIG_BOOTCOMMAND "bootp ; bootm"
-#endif
-/* The kernel command line & boot command below are for a platform flashed with afu.axf
-
-Image 666 Block  0 End Block  0 address 0x24000000 exec 0x24000000- name u-boot
-Image 667 Block  1 End Block 13 address 0x24040000 exec 0x24040000- name u-linux
-Image 668 Block 14 End Block 33 address 0x24380000 exec 0x24380000- name rootfs
-SIB at Block62 End Block62 address 0x24f80000
+#include <config_cmd_default.h>
 
-*/
 #define CONFIG_BOOTDELAY       2
-#define CONFIG_BOOTARGS        "root=/dev/mtdblock2 mem=128M ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0 console=ttyAMA0"
-#define CONFIG_BOOTCOMMAND "cp 0x24080000 0x7fc0 0x100000; bootm"
+#define CONFIG_BOOTARGS        "root=/dev/mtdblock0 console=ttyAMA0 console=tty ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0"
+#define CONFIG_BOOTCOMMAND "tftpboot ; bootm"
+#define CONFIG_SERVERIP 192.168.1.100
+#define CONFIG_IPADDR 192.168.1.104
+#define CONFIG_BOOTFILE "uImage"
 
 /*
  * Miscellaneous configurable options
@@ -126,17 +113,6 @@ SIB at Block62 End Block62 address 0x24f80000
 #define CONFIG_SYS_LOAD_ADDR   0x7fc0  /* default load address */
 
 /*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE       (128*1024)      /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ   (4*1024)        /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ   (4*1024)        /* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
  * Physical Memory Map
  */
 #define CONFIG_NR_DRAM_BANKS   1               /* we have 1 bank of DRAM */
@@ -201,15 +177,6 @@ SIB at Block62 End Block62 address 0x24f80000
 
 #define CONFIG_ENV_SECT_SIZE   0x40000         /* 256KB */
 #define CONFIG_ENV_SIZE                8192            /* 8KB */
-/*-----------------------------------------------------------------------
- * CP control registers
- */
-#define CPCR_BASE              0xCB000000      /* CP Registers*/
-#define OS_FLASHPROG           0x00000004      /* Flash register*/
-#define CPMASK_EXTRABANK       0x8
-#define CPMASK_FLASHSIZE       0x4
-#define CPMASK_FLWREN          0x2
-#define CPMASK_FLVPPEN         0x1
 
 /*
  * The ARM boot monitor initializes the board.