Convert CONFIG_HOSTNAME et al to Kconfig

[platform/kernel/u-boot.git] / include / configs / integratorcp.h

diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h
index d8a474d..596e4ff 100644 (file)
--- a/include/configs/integratorcp.h
+++ b/include/configs/integratorcp.h
@@ -17,51 +17,11 @@
 #include "integrator-common.h"
 
 /* Integrator CP-specific configuration */
-#define CONFIG_SYS_HZ_CLOCK            1000000 /* Timer 1 is clocked at 1Mhz */
-
-/*
- * Hardware drivers
- */
-#define CONFIG_SMC91111
-#define CONFIG_SMC_USE_32_BIT
-#define CONFIG_SMC91111_BASE    0xC8000000
-#undef CONFIG_SMC91111_EXT_PHY
-
-/*
- * Command line configuration.
- */
-#define CONFIG_BOOTCOMMAND "tftpboot ; bootm"
-#define CONFIG_SERVERIP 192.168.1.100
-#define CONFIG_IPADDR 192.168.1.104
-#define CONFIG_BOOTFILE "uImage"
+#define CFG_SYS_HZ_CLOCK               1000000 /* Timer 1 is clocked at 1Mhz */
 
 /*
  * Miscellaneous configurable options
  */
 #define PHYS_FLASH_SIZE                        0x01000000      /* 16MB */
-#define CONFIG_SYS_MAX_FLASH_SECT      64
-#define CONFIG_SYS_MONITOR_LEN         0x00100000
-
-/*
- * Move up the U-Boot & monitor area if more flash is fitted.
- * If this U-Boot is to be run on Integrators with varying flash sizes,
- * drivers/mtd/cfi_flash.c::flash_init() can read the Integrator CP_FLASHPROG
- * register and dynamically assign CONFIG_ENV_ADDR & CONFIG_SYS_MONITOR_BASE
- * - CONFIG_SYS_MONITOR_BASE is set to indicate that the environment is not
- * embedded in the boot monitor(s) area
- */
-#if ( PHYS_FLASH_SIZE == 0x04000000 )
-
-#define CONFIG_SYS_MONITOR_BASE        0x27F40000
-
-#elif (PHYS_FLASH_SIZE == 0x02000000 )
-
-#define CONFIG_SYS_MONITOR_BASE        0x25F40000
-
-#else
-
-#define CONFIG_SYS_MONITOR_BASE        0x27F40000
-
-#endif
 
 #endif /* __CONFIG_H */