Add CONFIG_USE_PREBOOT to boards that use CONFIG_PREBOOT

[platform/kernel/u-boot.git] / include / configs / imx8qxp_mek.h

diff --git a/include/configs/imx8qxp_mek.h b/include/configs/imx8qxp_mek.h
index d34d174..c1f1934 100644 (file)
--- a/include/configs/imx8qxp_mek.h
+++ b/include/configs/imx8qxp_mek.h
@@ -9,6 +9,29 @@
 #include <linux/sizes.h>
 #include <asm/arch/imx-regs.h>
 
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SPL_MAX_SIZE                            (124 * 1024)
+#define CONFIG_SYS_MONITOR_LEN                         (1024 * 1024)
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR                0x250
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION             0
+
+#define CONFIG_SPL_LDSCRIPT            "arch/arm/cpu/armv8/u-boot-spl.lds"
+#define CONFIG_SPL_STACK               0x013E000
+#define CONFIG_SPL_BSS_START_ADDR      0x00128000
+#define CONFIG_SPL_BSS_MAX_SIZE                0x1000  /* 4 KB */
+#define CONFIG_SYS_SPL_MALLOC_START    0x00120000
+#define CONFIG_SYS_SPL_MALLOC_SIZE     0x3000  /* 12 KB */
+#define CONFIG_SERIAL_LPUART_BASE      0x5a060000
+#define CONFIG_MALLOC_F_ADDR           0x00120000
+
+#define CONFIG_SPL_RAW_IMAGE_ARM_TRUSTED_FIRMWARE
+
+#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
+
+#define CONFIG_OF_EMBED
+#endif
+
 #define CONFIG_REMAKE_ELF
 
 #define CONFIG_BOARD_EARLY_INIT_F
@@ -23,12 +46,10 @@
 #undef CONFIG_CMD_CRC32
 #undef CONFIG_BOOTM_NETBSD
 
-#define CONFIG_FSL_ESDHC
 #define CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
 #define USDHC1_BASE_ADDR                0x5B010000
 #define USDHC2_BASE_ADDR                0x5B020000
-#define CONFIG_SUPPORT_EMMC_BOOT       /* eMMC specific */
 
 #define CONFIG_ENV_OVERWRITE
 
@@ -39,11 +60,11 @@
        "script=boot.scr\0" \
        "image=Image\0" \
        "panel=NULL\0" \
-       "console=ttyLP0,${baudrate} earlycon=lpuart32,0x5a060000,${baudrate}\0" \
+       "console=ttyLP0,${baudrate} earlycon\0" \
        "fdt_addr=0x83000000\0"                 \
        "fdt_high=0xffffffffffffffff\0"         \
        "boot_fdt=try\0" \
-       "fdt_file=fsl-imx8qxp-mek.dtb\0" \
+       "fdt_file=imx8qxp-mek.dtb\0" \
        "initrd_addr=0x83800000\0"              \
        "initrd_high=0xffffffffffffffff\0" \
        "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
@@ -132,15 +153,6 @@
 /* Serial */
 #define CONFIG_BAUDRATE                        115200
 
-/* Monitor Command Prompt */
-#define CONFIG_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
-#define CONFIG_SYS_CBSIZE              2048
-#define CONFIG_SYS_MAXARGS             64
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
-                                       sizeof(CONFIG_SYS_PROMPT) + 16)
-
 /* Generic Timer Definitions */
 #define COUNTER_FREQUENCY              8000000 /* 8MHz */