#include <asm/arch/imx-regs.h>
#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_MAX_SIZE (124 * 1024)
-#define CONFIG_SYS_MONITOR_LEN (1024 * 1024)
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x800
-
-#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"
-#define CONFIG_SPL_STACK 0x013E000
-#define CONFIG_SPL_BSS_START_ADDR 0x00128000
-#define CONFIG_SPL_BSS_MAX_SIZE 0x1000 /* 4 KB */
-#define CONFIG_SYS_SPL_MALLOC_START 0x00120000
-#define CONFIG_SYS_SPL_MALLOC_SIZE 0x3000 /* 12 KB */
#define CONFIG_SERIAL_LPUART_BASE 0x5a060000
-#define CONFIG_MALLOC_F_ADDR 0x00120000
-
-#define CONFIG_SPL_RAW_IMAGE_ARM_TRUSTED_FIRMWARE
+#define CFG_MALLOC_F_ADDR 0x00120000
-#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
-
-#define CONFIG_OF_EMBED
#endif
-#define CONFIG_REMAKE_ELF
-
-/* Flat Device Tree Definitions */
-#define CONFIG_OF_BOARD_SETUP
-
-#define CONFIG_SYS_FSL_ESDHC_ADDR 0
-#define USDHC1_BASE_ADDR 0x5B010000
-#define USDHC2_BASE_ADDR 0x5B020000
-#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
-
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
#ifdef CONFIG_AHAB_BOOT
#define AHAB_ENV "sec_boot=yes\0"
#else
#endif
/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
AHAB_ENV \
"script=boot.scr\0" \
"image=Image\0" \
"initrd_addr=0x83800000\0" \
"initrd_high=0xffffffffffffffff\0" \
"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
- "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
- "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+ "mmcpart=1\0" \
+ "mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
"mmcautodetect=yes\0" \
"mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \
"loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
"fi;" \
"fi;\0"
-#define CONFIG_BOOTCOMMAND \
- "mmc dev ${mmcdev}; if mmc rescan; then " \
- "if run loadbootscript; then " \
- "run bootscript; " \
- "else " \
- "if test ${sec_boot} = yes; then " \
- "if run loadcntr; then " \
- "run mmcboot; " \
- "else run netboot; " \
- "fi; " \
- "else " \
- "if run loadimage; then " \
- "run mmcboot; " \
- "else run netboot; " \
- "fi; " \
- "fi; " \
- "fi; " \
- "else booti ${loadaddr} - ${fdt_addr}; fi"
-
/* Link Definitions */
-#define CONFIG_SYS_LOAD_ADDR 0x80280000
-
-#define CONFIG_SYS_INIT_SP_ADDR 0x80200000
/* Default environment is in SD */
-#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
-
/* On LPDDR4 board, USDHC1 is for eMMC, USDHC2 is for SD on CPU board */
-#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */
-#define CONFIG_SYS_FSL_USDHC_NUM 2
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN ((CONFIG_ENV_SIZE + (32 * 1024)) * 1024)
-
-#define CONFIG_SYS_SDRAM_BASE 0x80000000
+#define CFG_SYS_SDRAM_BASE 0x80000000
#define PHYS_SDRAM_1 0x80000000
#define PHYS_SDRAM_2 0x880000000
#define PHYS_SDRAM_1_SIZE 0x80000000 /* 2 GB */
#define PHYS_SDRAM_2_SIZE 0x100000000 /* 4 GB */
-/* Generic Timer Definitions */
-#define COUNTER_FREQUENCY 8000000 /* 8MHz */
-
-/* Networking */
-#define CONFIG_FEC_XCV_TYPE RGMII
-
#endif /* __IMX8QM_MEK_H */